急求Linux版本的calpuff运行文档

angrycar · 发表于 2022-1-18 16:22:44

本帖最后由 angrycar 于 2022-1-18 16:24 编辑

本人在windows下是能成功运行calmet和calpuff的，我把用到的运行的calpuff的m3d，GEO.DAT，surf.dat数据放到linux系统下的calpuff，在从基础的calmet运行的时候一直报错，找不到原因，急求各位大佬。报错信息：

calmet.inp文件如下：
CALMET.INP    2.1          Hour Start and End Times with Seconds
---------------- Run title (3 lines) ------------------------------------------
                  CALMET MODEL CONTROL FILE
                  --------------------------
-------------------------------------------------------------------------------
INPUT GROUP: 0 -- Input and Output File Names
Subgroup (a)
! GEODAT =GEO.DAT !
! SRFDAT = SURF.DAT !
! CLDDAT = !
! PRCDAT = !
! WTDAT =  !
! METLST = CALMET.lst !
! METDAT = CALMET.DAT !
! PACDAT =  !
! LCFILES = F !
NUMBER OF UPPER AIR & OVERWATER STATIONS:
! NUSTA =  0 !
! NOWSTA  =  0 !
NUMBER OF PROGNOSTIC and IGF-CALMET FILEs:
! NM3D  =  1 !
! NIGF =  0 !
! END !
-------------------------------------------------------------------------------
Subgroup (b)
Upper air files (one per station)
-------------------------------------------------------------------------------
Subgroup (c)
Overwater station files (one per station)
-------------------------------------------------------------------------------
Subgroup (d)
MM4/MM5/3D.DAT files (consecutive or overlapping)
! M3DDAT=testd02.m3d !  !END!

-------------------------------------------------------------------------------
Subgroup (e)
IGF-CALMET.DAT files (consecutive or overlapping)
-------------------------------------------------------------------------------
Subgroup (f)
Other file names
! DIADAT =  !
! PRGDAT =  !
! TSTPRT =  !
! TSTOUT =  !
! TSTKIN =  !
! TSTFRD =  !
! TSTSLP =  !
! DCSTGD =  !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 1 -- General run control parameters
-------------------------------------------------------------------------------
! IBYR = 2017 !
! IBMO = 1 !
! IBDY = 2 !
! IBHR = 0 !
! IRLG = 152 !
! IBTZ= 8 !
Length of modeling time-step (seconds)
Must divide evenly into 3600 (1 hour)
! IRTYPE = 1 !
Compute special data fields required
by CALGRID (i.e., 3-D fields of W wind
components and temperature)
in additional to regular
! LCALGRD = T !
! ITEST = 2 !
! MREG = 0 !
!END !
-------------------------------------------------------------------------------
INPUT GROUP: 2 -- Map Projection and Grid control parameters
-------------------------------------------------------------------------------
! PMAP = UTM !
! IUTMZN = 51 !
! UTMHEM = N !
! DATUM = WGS-84 !
! NX  =  20 !
! NY  =  20 !
! DGRIDKM  =  10 !
! XORIGKM  =  449 !
! YORIGKM  =  4516 !
! NZ  =  8 !
! ZFACE  =  0, 20, 50, 100, 200, 500, 1000, 2000, 3000 !
!END!
INPUT GROUP: 3 -- Output Options
-------------------------------------------------------------------------------
DISK OUTPUT OPTION
! LSAVE = T !
! IFORMO = 1 !
LINE PRINTER OUTPUT OPTIONS:
! LPRINT = T !
! IPRINF = 1 !
! IUVOUT = 0,  0,  0,  0,  0,  0,  0,  0,  0 !
! IWOUT = 0,  0,  0,  0,  0,  0,  0,  0,  0 !
! ITOUT = 0,  0,  0,  0,  0,  0,  0,  0,  0 !
! STABILITY = 0 !
! USTAR = 0 !
! MONIN = 0 !
! MIXHT = 0 !
! WSTAR = 0 !
! PRECIP = 0 !
! SENSHEAT = 0 !
! CONVZI = 0 !
Testing and debug print options for micrometeorological module
! LDB = F !
First time step for which debug data
! NN1 = 1 !
Last time step for which debug data
! NN2 = 2 !
! LDBCST = F !
! IOUTD  = 0 !
! NZPRN2  = 1 !
! IPR0  = 0 !
! IPR1  = 0 !
! IPR2  = 0 !
! IPR3  = 0 !
! IPR4  = 0 !
! IPR5  = 0 !
! IPR6  = 0 !
! IPR7  = 0 !
! IPR8  = 0 !
! END !
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
INPUT GROUP: 4 -- Meteorological data options
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
! NOOBS =  2 !
! NSSTA =  0 !
! NPSTA =  -1 !
! ICLOUD =  3 !
! IFORMS =  2 !
! IFORMP =  2 !
! IFORMC =  2 !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 5 -- Wind Field Options and Parameters
--------------
! IWFCOD = 1 !
! IFRADJ = 1 !
! IKINE = 0 !
! IOBR = 1 !
! ISLOPE = 1 !
! IEXTRP = 1 !
! ICALM = 0 !
! BIAS =0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 !
! RMIN2 = 4 !
! IPROG = 14 !
! IGFMET = 0 !
! LVARY = F !
! RMAX1 = 10 !
! RMAX2 = 10 !
! RMAX3 = 50 !
OTHER WIND FIELD INPUT PARAMETERS
! RMIN = 0.1 !
! TERRAD = 12 !
! R1 = 1 !
! R2 = 1 !
! RPROG = 5 !
! DIVLIM = 5E-06 !
! NITER = 50 !
! NSMTH =2 ,4 ,8 ,12 ,16 ,20 ,24 ,28 ,32 !
! NINTR2 =99 ,99 ,99 ,99 ,99 ,99 ,99 ,99 ,99 !
! CRITFN = 1 !
! ALPHA = 0.1 !
! FEXTR2 =0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 !
BARRIER INFORMATION
! NBAR = 0 !
! KBAR = 7 !
! XBBAR = !
! YBBAR = !
! XEBAR = !
! YEBAR = !
DIAGNOSTIC MODULE DATA INPUT OPTIONS
! IDIOPT1 = 0 !
! ISURFT = 0 !
! IDIOPT2 = 0 !
! IUPT = 0 !
! ZUPT = 200 !
! IDIOPT3 = 0 !
! IUPWND = -1 !
! ZUPWND =1 ,1000 !
! IDIOPT4 = 0 !
! IDIOPT5 = 0 !
LAKE BREEZE INFORMATION
! LLBREZE= F !
! NBOX = 0 !
! XG1 = !
! XG2 = !
! YG1 = !
! YG2 = !
! XBCST = !
! YBCST = !
! XECST = !
! YECST = !
! NLB = !
! METBXID =0 !
! END !
-------------------------------------------------------------------------------
INPUT GROUP: 6 -- Mixing Height, Temperature and Precipitation Parameters
EMPIRICAL MIXING HEIGHT CONSTANTS
! CONSTB = 1.41 !
! CONSTE = 0.15 !
! CONSTN = 2400 !
! CONSTW = 0.16 !
! FCORIOL = 0.0001 !
SPATIAL AVERAGING OF MIXING HEIGHTS
! IAVEZI = 1 !
! MNMDAV = 10 !
! HAFANG = 30 !
! ILEVZI = 1 !
CONVECTIVE MIXING HEIGHT OPTIONS:
! IMIXH = 1 !
! THRESHL = 0.05 !
! THRESHW = 0.05 !
! ITWPROG = 0 !
! ILUOC3D = 16 !
OTHER MIXING HEIGHT VARIABLES
! DPTMIN = 0.001 !
! DZZI = 200 !
! ZIMIN = 50 !
! ZIMAX = 5000 !
! ZIMINW = 50 !
! ZIMAXW = 5000 !
OVERWATER SURFACE FLUXES METHOD and PARAMETERS
! ICOARE = 10 !
! DSHELF = 0 !
! IWARM = 0 !
! ICOOL = 0 !
RELATIVE HUMIDITY PARAMETERS
TEMPERATURE PARAMETERS
! ITPROG = 2 !
Interpolation type
! IRAD = 1 !
! TRADKM = 500 !
! NUMTS = 5 !
! IAVET = 1 !
! TGDEFB = -0.0098 !
! TGDEFA = -0.0045 !
! JWAT1 = 55 !
! JWAT2 = 55 !
PRECIP INTERPOLATION PARAMETERS
! NFLAGP = 3 !
! SIGMAP = 15 !
! CUTP = 1 !
! END !
-------------------------------------------------------------------------------
INPUT GROUP: 7 -- Surface meteorological station parameters
SURFACE STATION VARIABLES
      Name ID          X coord. Y coord. Time Anem
! END !
-------------------------------------------------------------------------------
INPUT GROUP: 8 -- Upper air meteorological station parameters
UPPER AIR STATION VARIABLES
      Name ID    X coord. Y coord.  Time zone
! END !
-------------------------------------------------------------------------------
INPUT GROUP: 9 -- Precipitation station parameters
PRECIPITATION STATION VARIABLES
      Name Station X coord.  Y coord.
! END !

duduudu11 · 发表于 2022-1-18 16:37:15

linux下的本来就很麻烦，输入输出涉及到fortran的编译的选项，去好好查源代码吧

angrycar · 发表于 2022-1-18 17:04:08

duduudu11 发表于 2022-1-18 16:37
linux下的本来就很麻烦，输入输出涉及到fortran的编译的选项，去好好查源代码吧

好吧

		自动登录	找回密码
密码			立即注册