- 积分
- 16
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2016-10-21
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
我需要按照官网例子运行模式时,前面都没问题。下面是我的namelist.input
&time_control
run_days = 2,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2010,
start_month = 07,
start_day = 14,
start_hour = 00,
start_minute = 00,
start_second = 00,
end_year = 2010,
end_month = 07,
end_day = 16,
end_hour = 00,
end_minute = 00,
end_second = 00,
interval_seconds = 10800,
input_from_file = .true.,
history_interval = 60,
frames_per_outfile = 72,
restart = .false.,
restart_interval = 0,
io_form_history = 2,
io_form_restart = 2,
io_form_input = 2,
io_form_boundary = 2,
auxinput6_inname = 'wrfbiochemi_d01',
auxinput7_inname = 'wrffirechemi_d<domain>',
auxinput8_inname = 'wrfchemi_gocart_bg_d<domain>',
auxinput12_inname = 'wrf_chem_input',
auxinput5_interval_m = 86400,
auxinput7_interval_m = 86400,
auxinput8_interval_m = 86400,
io_form_auxinput2 = 2,
io_form_auxinput5 = 2,
io_form_auxinput6 = 2,
io_form_auxinput7 = 2,
io_form_auxinput8 = 2,
io_form_auxinput12 = 2,
debug_level = 0,
auxinput1_inname = "met_em.d<domain>.<date>",
/
auxinput13_inname = 'wrfchemv_d<domain>',
auxinput13_interval_m = 86400,
io_form_auxinput13 = 2,
&dfi_control
/
&domains
time_step = 600,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 1,
s_we = 1,
e_we = 41,
s_sn = 1,
e_sn = 41,
e_vert = 31,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 100000,
dy = 100000,
grid_id = 1,
parent_id = 0,
i_parent_start = 1,
j_parent_start = 1,
parent_grid_ratio = 1,
parent_time_step_ratio = 1,
p_top_requested = 5000,
feedback = 1,
smooth_option = 0,
p_top_requested = 5000,
zap_close_levels = 50,
interp_type = 1,
t_extrap_type = 2,
force_sfc_in_vinterp = 0,
use_levels_below_ground = .true.,
use_surface = .true.,
lagrange_order = 1,
/
sfcp_to_sfcp = .true.,
&physics
num_land_cat = 24,
mp_physics = 4,
progn = 0,
ra_lw_physics = 1,
ra_sw_physics = 2,
radt = 30,
sf_sfclay_physics = 1,
sf_surface_physics = 2,
bl_pbl_physics = 1,
bldt = 0,
cu_physics = 5,
cu_diag = 1,
cudt = 0,
ishallow = 0,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0,
mp_zero_out = 2,
mp_zero_out_thresh = 1.e-12,
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
cu_rad_feedback = .true.,
/
&fdda
/
&dynamics
rk_ord = 3,
w_damping = 1,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0,
diff_6th_factor = 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000.,
dampcoef = 0.01,
khdif = 0,
kvdif = 0,
non_hydrostatic = .true.,
moist_adv_opt = 2,
scalar_adv_opt = 2,
chem_adv_opt = 2,
tke_adv_opt = 2,
time_step_sound = 4,
h_mom_adv_order = 5,
v_mom_adv_order = 3,
h_sca_adv_order = 5,
v_sca_adv_order = 3,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true.,
nested = .false.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
&chem
kemit = 1,
chem_opt = 400,
bioemdt = 0,
photdt = 0,
chemdt = 10,
io_style_emissions = 0,
emiss_opt = 3,
emiss_opt_vol = 1,
emiss_ash_hgt = 20000.,
chem_in_opt = 0,
phot_opt = 0,
gas_drydep_opt = 0,
aer_drydep_opt = 1,
bio_emiss_opt = 0,
ne_area = 0,
dust_opt = 1,
dmsemis_opt = 0,
seas_opt = 0,
depo_fact = 0.25,
gas_bc_opt = 0,
gas_ic_opt = 0,
aer_bc_opt = 1,
aer_ic_opt = 1,
gaschem_onoff = 0,
aerchem_onoff = 1,
wetscav_onoff = 0,
cldchem_onoff = 0,
vertmix_onoff = 1,
chem_conv_tr = 0,
conv_tr_wetscav = 0,
conv_tr_aqchem = 0,
biomass_burn_opt = 0,
plumerisefire_frq = 30,
have_bcs_chem = .false.,
aer_ra_feedback = 0,
aer_op_opt = 0,
opt_pars_out = 0,
diagnostic_chem = 0,
/
这是WRF里报错的log。
taskid: 0 hostname: localhost.localdomain
Ntasks in X 1 , ntasks in Y 1
WRF-CHEM V3.6.1 EMISSIONS PREPROCESSOR
*************************************
Parent domain
ids,ide,jds,jde 1 41 1 41
ims,ime,jms,jme -4 46 -4 46
ips,ipe,jps,jpe 1 41 1 41
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 291056612 bytes allocated
open file wrfinput_d01
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 0.01556 elapsed seconds
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 16 SNOW CATEGORY = 24
INITIALIZE THREE Noah LSM RELATED TABLES
LANDUSE TYPE = USGS FOUND 27 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*********************************************************************
* PROGRAM:WRF/CHEM V3.6.1 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
WARNING: dust option 1 currently works only with the GOCART aerosol option.
past opening wrfinput_d01
READ GOCART BACKGROUND DATA
PAST GOCART BACKGROUND DATA
OPEN GOCART BACKGROUND DATA WRF file
GOCART BACKGROUND DATA file name: wrfchemi_gocart_bg_d01
I am reading global volcanic emissions, dims: = 1 40 1 40
OPENED FILE: volc_d01
now do ash mass
now do ash heigt
now do erup dt
new mass= 100.0000 15.00000
OPEN EMISSIONS WRF file for emissions coming from volcano data set
Time period # 1 to process = 2010-07-14_00:00:00
Total analysis times to input = 1
Total number of times to input = 1 1
PGFIO-F-209/OPEN/unit=91/'OLD' specified for file which does not exist.
File name = wrfem_00to12z_d01
In source file convert_emiss.f90, at line number 1237
希望各位帮忙看看到底哪里错了。谢谢。
|
|