- 积分
- 562
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2012-12-20
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
本帖最后由 大侠MVP 于 2018-8-15 17:05 编辑
运行二层嵌套就出错run一小会儿就自己中断,不嵌套就啥事儿没有。
060100开始run,一小会儿rsl.error.0000无报错突然中断,rsl.out.0000出现如下信息
Timing for main: time 2016-06-01_13:33:20 on domain 2: 0.06888 elapsed seconds
Timing for main: time 2016-06-01_13:33:30 on domain 2: 0.07041 elapsed seconds
Timing for main: time 2016-06-01_13:33:30 on domain 1: 0.35202 elapsed seconds
Timing for main: time 2016-06-01_13:33:40 on domain 2: 0.07494 elapsed seconds
clh GAMMA: NaNQ 1.82281662104440212 0.000000000000000000E+00 NaNQ 1.00000000000000000 1.00000000000000000
clh GAMMA: -NaNQ 0.000000000000000000E+00 0.000000000000000000E+00 -NaNQ 1.00000000000000000 0.000000000000000000E+00
clh GAMMA: NaNQ 1.82281662104440212 0.000000000000000000E+00 NaNQ 1.00000000000000000 1.00000000000000000
clh GAMMA: -NaNQ 0.000000000000000000E+00 0.000000000000000000E+00 -NaNQ 1.00000000000000000 0.000000000000000000E+00
然后就没有然后了,那clh GAMMA那行是个啥?
换了时间试了2016年和2017年均不行。时间步长60、54、30也试了均不行。
附namelist请大神帮忙诊断下,不胜感激
&time_control
run_days = 0,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2016, 2016, 2000,
start_month = 06, 06, 01,
start_day = 01, 01, 24,
start_hour = 00, 00, 12,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2016, 2016, 2000,
end_month = 06, 06, 01,
end_day = 07, 07, 25,
end_hour = 00, 00, 12,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,
history_interval = 180, 60, 60,
frames_per_outfile = 3000, 3000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 30,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 2,
e_we = 50, 73, 94,
e_sn = 50, 73, 91,
e_vert = 33, 33, 30,
p_top_requested = 10000,
num_metgrid_levels = 32,
num_metgrid_soil_levels = 4,
dx = 27000, 9000, 3333.33,
dy = 27000, 9000, 3333.33,
grid_id = 1, 2, 3,
parent_id = 1, 1, 2,
i_parent_start = 1, 14, 30,
j_parent_start = 1, 14, 30,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 0
/
&physics
mp_physics = 2, 2, 3,
ra_lw_physics = 1, 1, 1,
ra_sw_physics = 1, 1, 1,
radt = 27, 9, 30,
sf_sfclay_physics = 1, 1, 1,
sf_surface_physics = 5, 5, 2,
bl_pbl_physics = 1, 1, 1,
bldt = 0, 0, 0,
cu_physics = 1, 1, 0,
cudt = 5, 5, 5,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 10,
sf_urban_physics = 0, 0, 0,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1, 1, 1,
km_opt = 4, 4, 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
|
|