请选择 进入手机版 | 继续访问电脑版
爱气象,爱气象家园! 

气象家园

 找回密码
 立即注册

QQ登录

只需一步,快速开始

新浪微博登陆

只需一步, 快速开始

搜索
楼主: qq531884069

WRF、MEGAN以及CMAQ答疑帖

  [复制链接]

新浪微博达人勋

发表于 2021-12-12 10:18:04 | 显示全部楼层
qq531884069 发表于 2021-12-12 06:10
你在namelist.input里面把PX方案的FDDA的相关参数写上就行了   real之后会生成fdda文件的

嗷嗷嗷,知道啦,我试试去,谢谢大佬!!
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2021-12-12 20:07:33 | 显示全部楼层
AllenLu 发表于 2021-12-12 10:18
嗷嗷嗷,知道啦,我试试去,谢谢大佬!!

大佬,我在namelist.input里面把PX方案的FDDA的相关参数写上了   real之后也生成fdda文件没生成sfdda文件,当运行./wrf.exe的时候,出现错误:---- ERROR: Could not find matching time in input file
大佬知道是怎么肥四嘛?附上部分namelist.input:

&physics
physics_suite            = 'CONUS',
mp_physics               = 10,      10,      10,
cu_physics               = 1,       1,       0,
ra_lw_physics            = 4,       4,       4,
ra_sw_physics            = 4,       4,       4,
bl_pbl_physics           = 7,       7,       7,
sf_sfclay_physics        = 7,       7,       7,
sf_surface_physics       = 7,       7,       7,
radt                     = 30,       30,       30,
bldt                     = 0,        0,        0,
cudt                     = 5,        5,        5,
icloud                   = 1,
num_land_cat             = 21,
sf_urban_physics         = 0,        0,        0,
/

&fdda
grid_fdda                 = 1,       1,        1,
grid_sfdda                = 1,       1,        1,
pxlsm_soil_nudge          = 1,       1,        1,
sgfdda_inname             = “wrfsfdda_d<domain>”,
sgfdda_end_h              = 9999999,9999999,9999999,
sgfdda_interval_m         = 180,     180,      180,
gfdda_inname              = “wrffdda_d<domain>”,
gfdda_end_h               = 999999,999999,999999,
gfdda_interval_m          = 180,     180,      180,
fgdt                      = 0,       0,        0,
if_no_pbl_nudging_uv      = 1,       1,        1,
if_no_pbl_nudging_t       = 1,       1,        1,
if_no_pbl_nudging_q       = 1,       1,        1,
if_zfac_uv                = 0,       0,        0,
k_zfac_uv                 = 13,      13,       13,
if_zfac_t                 = 0,       0,        0,
k_zfac_t                  = 13,      13,       13,
if_zfac_q                 = 0,       0,        0,
k_zfac_q                  = 13,      13,       13,
guv                       = 0.0001,0.0001,0.0001,
gt                        = 0.0001,0.0001,0.0001,
gq                        = 0.00001,0.00001,0.00001,
guv_sfc                   = 0.0000,0.0000,0.0000,
gt_sfc                    = 0.0000,0.0000,0.0000,
gq_sfc                    = 0.0000,0.0000,0.0000,
if_ramping                = 0,
dtramp_min                = 60.0,
io_form_gfdda             = 2,
io_form_sgfdda            = 2,
rinblw                    = 250.0,250.0,250.0,
/
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2021-12-20 20:41:21 | 显示全部楼层
您好,在运行MEGAN模型中run.met2mgn,将气象数据转为MEGAN所需要的气象数据时,出现了报错;请问需要怎么修改呢?
File "GRIDDESC" opened for input on unit:  99
     GRIDDESC

     Value for MCIPMET:  Y returning TRUE
     Value for MM5MET:  N returning FALSE
     Value for SATPAR:  N returning FALSE
     Value for MCIPRAD:  Y returning TRUE
     Value for MM5RAD:  N returning FALSE
     Value for STDATE:  1714900
     Value for ENDATE:  1714923
     Value for EPISODE_SDATE:  2017147
     Value for GDNAM3D:  'BTH9km'
     Value for MCIPRAD:  Y returning TRUE
     Value for SATPAR:  N returning FALSE
     Value for EPISODE_SDATE:  2017147
     Value for IOAPI_CHECK_HEADERS not defined;returning default:   FALSE
      
     "METCRO2Dfile1" opened as OLD:READ-ONLY   
     File name "/home/xcxia/MCIP3.6/MCIPout/METCRO2D.BTH9km"
     File type GRDDED3
     Execution ID "mcip"
     Grid name "METCRO_Gridname_"
     Dimensions: 160 rows, 124 cols, 1 lays, 64 vbles
     NetCDF ID:         3  opened as READONLY            
     Starting date and time  2017147:000000 (0:00:00   May 27, 2017)
     Timestep                          010000 (1:00:00 hh:mm:ss)
     Maximum current record number       841
      
     "METCRO2Dfile2" opened as OLD:READ-ONLY   
     File name "/home/xcxia/MCIP3.6/MCIPout/METCRO2D.BTH9km"
     File type GRDDED3
     Execution ID "mcip"
     Grid name "METCRO_Gridname_"
     Dimensions: 160 rows, 124 cols, 1 lays, 64 vbles
     NetCDF ID:         4  opened as READONLY            
     Starting date and time  2017147:000000 (0:00:00   May 27, 2017)
     Timestep                          010000 (1:00:00 hh:mm:ss)
     Maximum current record number       841
     PFILE           :/home/xcxia/MEGANv2.10/Input/MGNMET/PFILE
     
     >>--->> WARNING in subroutine OPEN3
     File not available.
     
     
     *** ERROR ABORT in subroutine readmcip
     Could not open or create PFILE            file
     Date and time  0:00:00   May 27, 2017    (2017147:000000)
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2022-1-13 22:23:14 | 显示全部楼层
您好,请问一下在Megan3.1 preprocessor中编译prepmegan4cmaq_cantype一直报错如何解决?报错如下:
ifort: command line warning #10006: ignoring unknown option '-ffree-form'
ifort: command line warning #10006: ignoring unknown option '-ffree-line-length-none'
prepmegan4cmaq_cantype.f90(582): error #5082: Syntax error, found '>' when expecting one of: <REAL_KIND_CON> <REAL_CONSTANT> <DBLPRC_CONSTANT> <DBLPRC_KIND_CON> <QUAPRC_CONSTANT> ...
     if ( varname(:) <> 'NTfrac' ) then
----------------------^
compilation aborted for prepmegan4cmaq_cantype.f90 (code 1)
make: *** [prepmegan4cmaq_cantype.o] Error 1
failed to build  prepmegan4cmaq_cantype.x
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2022-1-18 15:57:28 | 显示全部楼层
uilting with   1 groups of   0 I/O tasks.
Ntasks in X            8 , ntasks in Y            8
   For domain            1 , the domain size is too small for this many processors, or the decomposition aspect ratio is poor.
   Minimum decomposed computational patch size, either x-dir or y-dir, is 10 grid cells.
  e_we =    50, nproc_x =    8, with cell width in x-direction =    6
  e_sn =    50, nproc_y =    8, with cell width in y-direction =    6
  --- ERROR: Reduce the MPI rank count, or redistribute the tasks.
   For domain            2 , the domain size is too small for this many processors, or the decomposition aspect ratio is poor.
   Minimum decomposed computational patch size, either x-dir or y-dir, is 10 grid cells.
  e_we =    52, nproc_x =    8, with cell width in x-direction =    6
  e_sn =    61, nproc_y =    8, with cell width in y-direction =    7
  --- ERROR: Reduce the MPI rank count, or redistribute the tasks.
   For domain            3 , the domain size is too small for this many processors, or the decomposition aspect ratio is poor.
   Minimum decomposed computational patch size, either x-dir or y-dir, is 10 grid cells.
  e_we =    55, nproc_x =    8, with cell width in x-direction =    6
  e_sn =    73, nproc_y =    8, with cell width in y-direction =    9
  --- ERROR: Reduce the MPI rank count, or redistribute the tasks.
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:    1726
NOTE:       1 namelist settings are wrong. Please check and reset these options

这到底是是个啥问题,求助大神们
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

 楼主| 发表于 2022-1-19 08:19:04 | 显示全部楼层
litongxue 发表于 2022-1-18 15:57
uilting with   1 groups of   0 I/O tasks.
Ntasks in X            8 , ntasks in Y            8
    ...

你的网格不需要这么多的核进行计算
提交模拟的时候把你要用的核数减小就可以了
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2022-1-19 13:01:45 | 显示全部楼层
qq531884069 发表于 2022-1-19 08:19
你的网格不需要这么多的核进行计算
提交模拟的时候把你要用的核数减小就可以了

ROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
Processing domain 1 of 3
Processing 2019-12-30_00
    FILE
WARNING: Couldn't open file FILE:2019-12-30_06 for input.
WARNING: Couldn't open file FILE:2019-12-30_06 for input.
WARNING: Couldn't open file FILE:2019-12-30_06 for input.
ERROR: The mandatory field TT was not found in any input data.
WARNING: Couldn't open file FILE:2019-12-30_06 for input.
ERROR: The mandatory field TT was not found in any input data.
运行wps又出问题了,这是啥问题呢
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

 楼主| 发表于 2022-1-20 09:02:25 | 显示全部楼层
litongxue 发表于 2022-1-19 13:01
ROR: unknown out_format, ifv = 1195638480
ERROR: unknown out_format, ifv = 1195638480
ERROR: unk ...

你下载的再分析数据文件不全或者数据有错
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2022-1-20 16:21:58 | 显示全部楼层
请教下,使用MEGAN3.1,运行MEGAN_EFP.py的时候报错:
'SLA vegID' Table Created
'SLA genus' Table Created
'SLA family' Table Created
'SLA growthform' Table Created
Traceback (most recent call last):
  File "MEGAN_EFP.py", line 115, in <module>
    efp.m3efp_driver(scen_name, VegDB_tables, GridDB_tables, Description_Vegetation,
  File "./src/run_M3EFP.py", line 116, in m3efp_driver
    mvtef.run_M3VTEF_DB(M3VTEF_connection, vegtype_ef_out, cid, Jrating)
  File "./src/M3VTEF.py", line 288, in run_M3VTEF_DB
    SLA(db_connection)
  File "./src/M3VTEF.py", line 128, in SLA
    c.execute("CREATE TABLE 'SLA' AS SELECT 'Description Vegetation'.[VegID] AS [VegID], "
sqlite3.OperationalError: user-defined function raised exception
不知道是哪里出错了,又要怎么修改呢?感谢!
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

新浪微博达人勋

发表于 2022-1-21 23:52:43 | 显示全部楼层
求问大神WRF,前面都一切正常,运行./wrf.exe时报错如下:

Primary job  terminated normally, but 1 process returned
a non-zero exit code.. Per user-direction, the job has been aborted.
-------------------------------------------------------
--------------------------------------------------------------------------
mpirun detected that one or more processes exited with non-zero status, thus causing
the job to be terminated. The first process to do so was:

  Process name: [[65252,1],0]
  Exit code:    1
求大神指导!
密码修改失败请联系微信:mofangbao
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册 新浪微博登陆

本版积分规则

Copyright ©2011-2014 bbs.06climate.com All Rights Reserved.  Powered by Discuz! (京ICP-10201084)

本站信息均由会员发表,不代表气象家园立场,禁止在本站发表与国家法律相抵触言论

快速回复 返回顶部 返回列表