ubuntu单机wrf ./real断掉，求大神帮助！

棋子灯花

各位大神好，小弟在ubuntu下装好wrf，在run的时候，WPS各个步骤都已经成功，可是在WRF ./real.exe的时候出现了如下错误：（机子8核，已装mpi，并行）。不知是什么原因导致real断掉了，还望大神们指教，感激不尽！

ubuntu@ubuntu:~/model/WRFV3/test/em_real$ mpirun -np 8 ./real.exe
starting wrf task            2  of            8
starting wrf task            3  of            8
starting wrf task            5  of            8
starting wrf task            0  of            8
starting wrf task            6  of            8
starting wrf task            1  of            8
starting wrf task            7  of            8
starting wrf task            4  of            8

=====================================================================================
=   BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
=   EXIT CODE: 9
=   CLEANING UP REMAINING PROCESSES
=   YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
=====================================================================================
APPLICATION TERMINATED WITH THE EXIT STRING: Killed (signal 9)

longlivehj

要看rsl.out或rsl.error！

sicuoren

从rsl.out找原因吧

棋子灯花

longlivehj 发表于 2014-4-16 20:18
要看rsl.out或rsl.error！

rsl.error:

taskid: 0 hostname: ubuntu
Namelist logging not found in namelist.input. Using registry defaults for variables in logging.
Namelist dfi_control not found in namelist.input. Using registry defaults for variables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables in scm
Namelist fire not found in namelist.input. Using registry defaults for variables in fire
Namelist diags not found in namelist.input. Using registry defaults for variables in diags
  Ntasks in X            2 , ntasks in Y            2
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      3, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      3, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      3, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to      4
REAL_EM V3.5.1 PREPROCESSOR
  *************************************
  Parent domain
  ids,ide,jds,jde            1         150           1         150
  ims,ime,jms,jme           -4          82          -4          82
  ips,ipe,jps,jpe            1          75           1          75
  *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
    alloc_space_field: domain            1 ,             181198184  bytes allocated
  metgrid input_wrf.F first_date_input = 2013-07-05_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_00:00:00 Timing for input          0 s.
d01 2013-07-05_00:00:00          flag_soil_layers read from met_em file is  1
Max map factor in domain 1 =  1.06. Scale the dt in the model accordingly.
Using sfcprs3 to compute psfc
d01 2013-07-05_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-05_00:00:00 forcing artificial silty clay loam at    4 points, out of   5625
d01 2013-07-05_00:00:00 Timing for processing          1 s.
d01 2013-07-05_00:00:00 Timing for output          1 s.
d01 2013-07-05_00:00:00 Timing for loop #    1 =          2 s.
  metgrid input_wrf.F first_date_input = 2013-07-05_06:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_06:00:00 Timing for input          0 s.
d01 2013-07-05_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-05_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-05_06:00:00 Timing for processing          0 s.
d01 2013-07-05_06:00:00 Timing for output          0 s.
d01 2013-07-05_06:00:00 Timing for loop #    2 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-05_12:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_12:00:00 Timing for input          0 s.
d01 2013-07-05_12:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-05_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-05_12:00:00 Timing for processing          0 s.
d01 2013-07-05_12:00:00 Timing for output          0 s.
d01 2013-07-05_12:00:00 Timing for loop #    3 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-05_18:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_18:00:00 Timing for input          0 s.
d01 2013-07-05_18:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-05_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-05_18:00:00 Timing for processing          0 s.
d01 2013-07-05_18:00:00 Timing for output          0 s.
d01 2013-07-05_18:00:00 Timing for loop #    4 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-06_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_00:00:00 Timing for input          0 s.
d01 2013-07-06_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-06_00:00:00 Timing for processing          0 s.
d01 2013-07-06_00:00:00 Timing for output          0 s.
d01 2013-07-06_00:00:00 Timing for loop #    5 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-06_06:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_06:00:00 Timing for input          0 s.
d01 2013-07-06_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-06_06:00:00 Timing for processing          0 s.
d01 2013-07-06_06:00:00 Timing for output          0 s.
d01 2013-07-06_06:00:00 Timing for loop #    6 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-06_12:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_12:00:00 Timing for input          0 s.
d01 2013-07-06_12:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-06_12:00:00 Timing for processing          0 s.
d01 2013-07-06_12:00:00 Timing for output          0 s.
d01 2013-07-06_12:00:00 Timing for loop #    7 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-06_18:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_18:00:00 Timing for input          0 s.
d01 2013-07-06_18:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-06_18:00:00 Timing for processing          0 s.
d01 2013-07-06_18:00:00 Timing for output          0 s.
d01 2013-07-06_18:00:00 Timing for loop #    8 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-07_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-07_00:00:00 Timing for input          0 s.
d01 2013-07-07_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-07_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-07_00:00:00 Timing for processing          0 s.
d01 2013-07-07_00:00:00 Timing for output          0 s.
d01 2013-07-07_00:00:00 Timing for loop #    9 =          1 s.
  metgrid input_wrf.F first_date_input = 2013-07-07_06:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-07_06:00:00 Timing for input          0 s.
d01 2013-07-07_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-07_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-07_06:00:00 Timing for processing          0 s.
d01 2013-07-07_06:00:00 Timing for output          0 s.
d01 2013-07-07_06:00:00 Timing for loop #   10 =          1 s.
  *************************************
  Nesting domain
  ids,ide,jds,jde            1         340           1         340
  ims,ime,jms,jme           -4         180          -4         180
  ips,ipe,jps,jpe            1         170           1         170
  INTERMEDIATE domain
  ids,ide,jds,jde           17         135          17         135
  ims,ime,jms,jme           12          85          12          85
  ips,ipe,jps,jpe           15          75          15          75
  *************************************
d01 2013-07-07_06:00:00  alloc_space_field: domain            2 ,             807832528  bytes allocated
  metgrid input_wrf.F first_date_input = 2013-07-05_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d02 2013-07-05_00:00:00 Timing for input          2 s.
d02 2013-07-05_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d02 2013-07-05_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
d02 2013-07-05_00:00:00 forcing artificial silty clay loam at   72 points, out of  28900
d02 2013-07-05_00:00:00 Timing for processing          3 s.
d02 2013-07-05_00:00:00 Timing for output          3 s.
d02 2013-07-05_00:00:00 Timing for loop #    1 =          9 s.
  *************************************
  Nesting domain
  ids,ide,jds,jde            1         418           1         418
  ims,ime,jms,jme           -4         219          -4         219
  ips,ipe,jps,jpe            1         209           1         209
  INTERMEDIATE domain
  ids,ide,jds,jde           99         243          99         243
  ims,ime,jms,jme           94         180          94         180
  ips,ipe,jps,jpe           97         170          97         170
  *************************************

棋子灯花

sicuoren 发表于 2014-4-16 20:45
从rsl.out找原因吧

rsl.out:

taskid: 0 hostname: ubuntu
Namelist logging not found in namelist.input. Using registry defaults for variables in logging.
Namelist dfi_control not found in namelist.input. Using registry defaults for variables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables in scm
Namelist fire not found in namelist.input. Using registry defaults for variables in fire
Namelist diags not found in namelist.input. Using registry defaults for variables in diags
  Ntasks in X            2 , ntasks in Y            2
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      3, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      3, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      3, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to      4
REAL_EM V3.5.1 PREPROCESSOR
  *************************************
  Parent domain
  ids,ide,jds,jde            1         150           1         150
  ims,ime,jms,jme           -4          82          -4          82
  ips,ipe,jps,jpe            1          75           1          75
  *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
    alloc_space_field: domain            1 ,             181198184  bytes allocated
Time period #   1 to process = 2013-07-05_00:00:00.
Time period #   2 to process = 2013-07-05_06:00:00.
Time period #   3 to process = 2013-07-05_12:00:00.
Time period #   4 to process = 2013-07-05_18:00:00.
Time period #   5 to process = 2013-07-06_00:00:00.
Time period #   6 to process = 2013-07-06_06:00:00.
Time period #   7 to process = 2013-07-06_12:00:00.
Time period #   8 to process = 2013-07-06_18:00:00.
Time period #   9 to process = 2013-07-07_00:00:00.
Time period #  10 to process = 2013-07-07_06:00:00.
Total analysis times to input =   10.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-05_00:00:00.0000, which is loop #   1 out of   10
configflags%julyr, %julday, %gmt:        2013         186   0.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-05_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_00:00:00 Timing for input          0 s.
d01 2013-07-05_00:00:00          flag_soil_layers read from met_em file is  1
Max map factor in domain 1 =  1.06. Scale the dt in the model accordingly.
Using sfcprs3 to compute psfc
Converged znw(kte) should be about 0.0 =   1.67638063E-08
           1   z (m)            =    0.0000000   
           2   z (m) and dz (m) =    56.575867       56.575867   
           3   z (m) and dz (m) =    137.94395       81.368088   
           4   z (m) and dz (m) =    244.69888       106.75493   
           5   z (m) and dz (m) =    377.64063       132.94176   
           6   z (m) and dz (m) =    546.29321       168.65259   
           7   z (m) and dz (m) =    761.12152       214.82831   
           8   z (m) and dz (m) =    1016.1669       255.04536   
           9   z (m) and dz (m) =    1455.3114       439.14450   
          10   z (m) and dz (m) =    1914.6079       459.29654   
          11   z (m) and dz (m) =    2396.1799       481.57193   
          12   z (m) and dz (m) =    2902.5129       506.33319   
          13   z (m) and dz (m) =    3845.1096       942.59662   
          14   z (m) and dz (m) =    4787.7070       942.59717   
          15   z (m) and dz (m) =    5730.3042       942.59717   
          16   z (m) and dz (m) =    6672.9014       942.59717   
          17   z (m) and dz (m) =    7615.4990       942.59760   
          18   z (m) and dz (m) =    8558.0957       942.59680   
          19   z (m) and dz (m) =    9500.6934       942.59760   
          20   z (m) and dz (m) =    10443.291       942.59760   
          21   z (m) and dz (m) =    11385.888       942.59680   
          22   z (m) and dz (m) =    12328.484       942.59680   
          23   z (m) and dz (m) =    13271.081       942.59680   
          24   z (m) and dz (m) =    14213.678       942.59680   
          25   z (m) and dz (m) =    15156.274       942.59680   
          26   z (m) and dz (m) =    16098.872       942.59680   
          27   z (m) and dz (m) =    17041.469       942.59680   
          28   z (m) and dz (m) =    17984.064       942.59680   
          29   z (m) and dz (m) =    18926.662       942.59680   
          30   z (m) and dz (m) =    19869.260       942.59839   
d01 2013-07-05_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2013-07-05_00:00:00 forcing artificial silty clay loam at    4 points, out of   5625
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-05_00:00:00 Timing for processing          1 s.
d01 2013-07-05_00:00:00 Timing for output          1 s.
d01 2013-07-05_00:00:00 Timing for loop #    1 =          2 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-05_06:00:00.0000, which is loop #   2 out of   10
configflags%julyr, %julday, %gmt:        2013         186   6.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-05_06:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_06:00:00 Timing for input          0 s.
d01 2013-07-05_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-05_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-05_06:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-05_00:00:00.0000 2013-07-05_06:00:00     
d01 2013-07-05_06:00:00 Timing for output          0 s.
d01 2013-07-05_06:00:00 Timing for loop #    2 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-05_12:00:00.0000, which is loop #   3 out of   10
configflags%julyr, %julday, %gmt:        2013         186   12.000000   
  metgrid input_wrf.F first_date_input = 2013-07-05_12:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_12:00:00 Timing for input          0 s.
d01 2013-07-05_12:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-05_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-05_12:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-05_06:00:00.0000 2013-07-05_12:00:00     
d01 2013-07-05_12:00:00 Timing for output          0 s.
d01 2013-07-05_12:00:00 Timing for loop #    3 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-05_18:00:00.0000, which is loop #   4 out of   10
configflags%julyr, %julday, %gmt:        2013         186   18.000000   
  metgrid input_wrf.F first_date_input = 2013-07-05_18:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-05_18:00:00 Timing for input          0 s.
d01 2013-07-05_18:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-05_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-05_18:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-05_12:00:00.0000 2013-07-05_18:00:00     
d01 2013-07-05_18:00:00 Timing for output          0 s.
d01 2013-07-05_18:00:00 Timing for loop #    4 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-06_00:00:00.0000, which is loop #   5 out of   10
configflags%julyr, %julday, %gmt:        2013         187   0.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-06_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_00:00:00 Timing for input          0 s.
d01 2013-07-06_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-06_00:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-05_18:00:00.0000 2013-07-06_00:00:00     
d01 2013-07-06_00:00:00 Timing for output          0 s.
d01 2013-07-06_00:00:00 Timing for loop #    5 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-06_06:00:00.0000, which is loop #   6 out of   10
configflags%julyr, %julday, %gmt:        2013         187   6.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-06_06:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_06:00:00 Timing for input          0 s.
d01 2013-07-06_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-06_06:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-06_00:00:00.0000 2013-07-06_06:00:00     
d01 2013-07-06_06:00:00 Timing for output          0 s.
d01 2013-07-06_06:00:00 Timing for loop #    6 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-06_12:00:00.0000, which is loop #   7 out of   10
configflags%julyr, %julday, %gmt:        2013         187   12.000000   
  metgrid input_wrf.F first_date_input = 2013-07-06_12:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_12:00:00 Timing for input          0 s.
d01 2013-07-06_12:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-06_12:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-06_06:00:00.0000 2013-07-06_12:00:00     
d01 2013-07-06_12:00:00 Timing for output          0 s.
d01 2013-07-06_12:00:00 Timing for loop #    7 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-06_18:00:00.0000, which is loop #   8 out of   10
configflags%julyr, %julday, %gmt:        2013         187   18.000000   
  metgrid input_wrf.F first_date_input = 2013-07-06_18:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-06_18:00:00 Timing for input          0 s.
d01 2013-07-06_18:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-06_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-06_18:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-06_12:00:00.0000 2013-07-06_18:00:00     
d01 2013-07-06_18:00:00 Timing for output          0 s.
d01 2013-07-06_18:00:00 Timing for loop #    8 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-07_00:00:00.0000, which is loop #   9 out of   10
configflags%julyr, %julday, %gmt:        2013         188   0.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-07_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-07_00:00:00 Timing for input          0 s.
d01 2013-07-07_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-07_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-07_00:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-06_18:00:00.0000 2013-07-07_00:00:00     
d01 2013-07-07_00:00:00 Timing for output          0 s.
d01 2013-07-07_00:00:00 Timing for loop #    9 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2013-07-07_06:00:00.0000, which is loop #  10 out of   10
configflags%julyr, %julday, %gmt:        2013         188   6.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-07_06:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d01 2013-07-07_06:00:00 Timing for input          0 s.
d01 2013-07-07_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2013-07-07_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2013-07-07_06:00:00 Timing for processing          0 s.
LBC valid between these times 2013-07-07_00:00:00.0000 2013-07-07_06:00:00     
d01 2013-07-07_06:00:00 Timing for output          0 s.
d01 2013-07-07_06:00:00 Timing for loop #   10 =          1 s.
  *************************************
  Nesting domain
  ids,ide,jds,jde            1         340           1         340
  ims,ime,jms,jme           -4         180          -4         180
  ips,ipe,jps,jpe            1         170           1         170
  INTERMEDIATE domain
  ids,ide,jds,jde           17         135          17         135
  ims,ime,jms,jme           12          85          12          85
  ips,ipe,jps,jpe           15          75          15          75
  *************************************
d01 2013-07-07_06:00:00  alloc_space_field: domain            2 ,             807832528  bytes allocated
Time period #   1 to process = 2013-07-05_00:00:00.
Time period #   2 to process = 2013-07-05_06:00:00.
Time period #   3 to process = 2013-07-05_12:00:00.
Time period #   4 to process = 2013-07-05_18:00:00.
Time period #   5 to process = 2013-07-06_00:00:00.
Time period #   6 to process = 2013-07-06_06:00:00.
Time period #   7 to process = 2013-07-06_12:00:00.
Time period #   8 to process = 2013-07-06_18:00:00.
Time period #   9 to process = 2013-07-07_00:00:00.
Time period #  10 to process = 2013-07-07_06:00:00.
Total analysis times to input =   10.
  
-----------------------------------------------------------------------------
  
Domain  2: Current date being processed: 2013-07-05_00:00:00.0000, which is loop #   1 out of   10
configflags%julyr, %julday, %gmt:        2013         186   0.0000000   
  metgrid input_wrf.F first_date_input = 2013-07-05_00:00:00
  metgrid input_wrf.F first_date_nml = 2013-07-05_00:00:00
d02 2013-07-05_00:00:00 Timing for input          2 s.
d02 2013-07-05_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
Converged znw(kte) should be about 0.0 =   1.67638063E-08
           1   z (m)            =    0.0000000   
           2   z (m) and dz (m) =    56.575867       56.575867   
           3   z (m) and dz (m) =    137.94395       81.368088   
           4   z (m) and dz (m) =    244.69888       106.75493   
           5   z (m) and dz (m) =    377.64063       132.94176   
           6   z (m) and dz (m) =    546.29321       168.65259   
           7   z (m) and dz (m) =    761.12152       214.82831   
           8   z (m) and dz (m) =    1016.1669       255.04536   
           9   z (m) and dz (m) =    1455.3114       439.14450   
          10   z (m) and dz (m) =    1914.6079       459.29654   
          11   z (m) and dz (m) =    2396.1799       481.57193   
          12   z (m) and dz (m) =    2902.5129       506.33319   
          13   z (m) and dz (m) =    3845.1096       942.59662   
          14   z (m) and dz (m) =    4787.7070       942.59717   
          15   z (m) and dz (m) =    5730.3042       942.59717   
          16   z (m) and dz (m) =    6672.9014       942.59717   
          17   z (m) and dz (m) =    7615.4990       942.59760   
          18   z (m) and dz (m) =    8558.0957       942.59680   
          19   z (m) and dz (m) =    9500.6934       942.59760   
          20   z (m) and dz (m) =    10443.291       942.59760   
          21   z (m) and dz (m) =    11385.888       942.59680   
          22   z (m) and dz (m) =    12328.484       942.59680   
          23   z (m) and dz (m) =    13271.081       942.59680   
          24   z (m) and dz (m) =    14213.678       942.59680   
          25   z (m) and dz (m) =    15156.274       942.59680   
          26   z (m) and dz (m) =    16098.872       942.59680   
          27   z (m) and dz (m) =    17041.469       942.59680   
          28   z (m) and dz (m) =    17984.064       942.59680   
          29   z (m) and dz (m) =    18926.662       942.59680   
          30   z (m) and dz (m) =    19869.260       942.59839   
d02 2013-07-05_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
d02 2013-07-05_00:00:00 forcing artificial silty clay loam at   72 points, out of  28900
LAND  CHANGE =            0
WATER CHANGE =            0
d02 2013-07-05_00:00:00 Timing for processing          3 s.
d02 2013-07-05_00:00:00 Timing for output          3 s.
d02 2013-07-05_00:00:00 Timing for loop #    1 =          9 s.
  *************************************
  Nesting domain
  ids,ide,jds,jde            1         418           1         418
  ims,ime,jms,jme           -4         219          -4         219
  ips,ipe,jps,jpe            1         209           1         209
  INTERMEDIATE domain
  ids,ide,jds,jde           99         243          99         243
  ims,ime,jms,jme           94         180          94         180
  ips,ipe,jps,jpe           97         170          97         170
  *************************************

棋子灯花

大神们帮帮忙。。。实在找不到原因了！

sicuoren

棋子灯花 发表于 2014-4-17 15:46
大神们帮帮忙。。。实在找不到原因了！

将你的积分步长减小试试看

棋子灯花

sicuoren 发表于 2014-4-21 22:32
将你的积分步长减小试试看

时间积分步长的原因？我同样的namelist在学校大型机是可以用的~~

sicuoren

棋子灯花 发表于 2014-4-22 08:12
时间积分步长的原因？我同样的namelist在学校大型机是可以用的~~

我不知道这个是否跟电脑配置有关，我之前也是跟你相同的错误。我在自己电脑上能运行，但在服务器却有问题，，，然后修改了积分步长就解决了

九】

{:eb513:}{:eb513:}