- 积分
- 6111
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2013-9-1
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看，没有帐号？立即注册
x
本帖最后由 astiny 于 2016-9-14 13:40 编辑
我的rsl.error:
taskid: 0 hostname: ln01
module_io_quilt_old.F 2931 F
Quilting with 1 groups of 0 I/O tasks.
Ntasks in X 1, ntasks in Y 1
Setting blank km_opt entries to domain #1 values.
--> The km_opt entry in the namelist.input is now max_domains.
Setting blank diff_opt entries to domain #1 values.
--> The diff_opt entry in the namelist.input is now max_domains.
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
Need MYNN PBL for icloud_bl = 1, resetting to 0
--- WARNING: Turning on cu_rad_feedback also requires setting cu_diag== 1
--- NOTE: RRTMG radiation is not used, setting: o3input=0 to avoid data pre-processing
--- NOTE: num_soil_layers has been set to 4
WRF V3.8 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 90 1 70
ims,ime,jms,jme -4 95 -4 75
ips,ipe,jps,jpe 1 90 1 70
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1, 1239431444 bytes allocated
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 0.05022 elapsed seconds
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*********************************************************************
* PROGRAM:WRF/CHEM V3.8 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
*************************************
Nesting domain
ids,ide,jds,jde 1 46 1 46
ims,ime,jms,jme -4 51 -4 51
ips,ipe,jps,jpe 1 46 1 46
INTERMEDIATE domain
ids,ide,jds,jde 43 63 33 53
ims,ime,jms,jme 38 68 28 58
ips,ipe,jps,jpe 41 65 31 55
*************************************
d01 2013-01-20_00:00:00 alloc_space_field: domain 2, 8944988 bytes allocated
d01 2013-01-20_00:00:00 alloc_space_field: domain 2, 465333364 bytes allocated
d01 2013-01-20_00:00:00 *** Initializing nest domain # 2 from an input file. ***
d01 2013-01-20_00:00:00 med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 2: 0.02421 elapsed seconds
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*********************************************************************
* PROGRAM:WRF/CHEM V3.8 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*********************************************************************
* PROGRAM:WRF/CHEM V3.8 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 17 SNOW CATEGORY = 15
INITIALIZE THREE Noah LSM RELATED TABLES
Skipping over LUTYPE = USGS
LANDUSE TYPE = MODIFIED_IGBP_MODIS_NOAH FOUND 20 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
*********************************************************************
* PROGRAM:WRF/CHEM V3.8 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
Timing for Writing wrfout_d01_2013-01-20_00:00:00 for domain 1: 0.46037 elapsed seconds
mediation_integrate: med_read_wrf_chem_emissions: Open file wrfchemi_00z_d01
HOURLY EMISSIONS UPDATE TIME 0.0 0.0
mediation_integrate: med_read_wrf_chem_emissions: Read emissions for time 2013-01-20_00:00:00
Timing for processing lateral boundary for domain 1: 0.02060 elapsed seconds
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE 1 IS 1 IE 90 JS 1 JE 70
WRF NUMBER OF TILES = 1
1 3
forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image PC Routine Line Source
wrf.exe 0000000001A8A43B Unknown Unknown Unknown
wrf.exe 0000000001A2FCC1 Unknown Unknown Unknown
wrf.exe 0000000001B263EF Unknown Unknown Unknown
wrf.exe 0000000001B1F08E Unknown Unknown Unknown
wrf.exe 0000000001B0F65F Unknown Unknown Unknown
wrf.exe 00000000004F4B82 Unknown Unknown Unknown
wrf.exe 00000000004F51FF Unknown Unknown Unknown
wrf.exe 000000000040BFC1 Unknown Unknown Unknown
wrf.exe 000000000040BF7D Unknown Unknown Unknown
wrf.exe 000000000040BF1C Unknown Unknown Unknown
libc.so.6 00002B2F40407CDD Unknown Unknown Unknown
wrf.exe 000000000040BE19 Unknown Unknown Unknown
我的namelist.input
&time_control
run_days = 2,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2013, 2013,
start_month = 01, 01,
start_day = 20, 20,
start_hour = 00, 00,
start_minute = 00, 00,
start_second = 00, 00,
end_year = 2013, 2013,
end_month = 01, 01,
end_day = 22, 22,
end_hour = 00, 00,
end_minute = 00, 00,
end_second = 00, 00,
interval_seconds = 21600,
input_from_file = .true., .true.,
history_interval = 180, 60,
frames_per_outfile = 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2,
io_form_restart = 2,
io_form_input = 2,
io_form_boundary = 2,
debug_level = 0,
/
&domains
time_step = 600,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 2,
e_we = 90, 46,
e_sn = 70, 46,
e_vert = 35, 35,
eta_levels = 1.000 , 0.993 , 0.983 , 0.970 , 0.954 ,
0.934 , 0.909 , 0.880 , 0.845 , 0.807 ,
0.765 , 0.719 , 0.672 , 0.622 , 0.571 ,
0.520 , 0.468 , 0.420 , 0.376 , 0.335 ,
0.298 , 0.263 , 0.231 , 0.202 , 0.175 ,
0.150 , 0.127 , 0.106 , 0.088 , 0.070 ,
0.055 , 0.040 , 0.026 , 0.013 , 0.000 ,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 100000,33333.333,
dy = 100000,33333.333,
grid_id = 1, 2,
parent_id = 1, 1,
i_parent_start = 1, 45,
j_parent_start = 1, 35,
parent_grid_ratio = 1, 3,
parent_time_step_ratio = 1, 3,
feedback = 1,
smooth_option = 0,
/
&physics
mp_physics = 4, 2,
progn = 0,
ra_lw_physics = 1, 1,
ra_sw_physics = 2, 2,
radt = 30, 30,
sf_sfclay_physics = 1, 1,
sf_surface_physics = 2, 2,
bl_pbl_physics = 1, 1,
bldt = 0, 0,
cu_physics = 5, 5,
cu_diag = 1, 1,
cudt = 0, 0,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0, 0,
mp_zero_out = 2,
mp_zero_out_thresh = 1.e-12
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
cu_rad_feedback = .true.,
NUM_LAND_CAT = 21
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0,
diff_6th_factor = 0.12, 0.12,
base_temp = 290.,
damp_opt = 0,
zdamp = 5000., 5000.,
dampcoef = 0.2, 0.2,
khdif = 0, 0,
kvdif = 0, 0,
non_hydrostatic = .true., .true.,
moist_adv_opt = 1, 1,
scalar_adv_opt = 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,
nested = .false., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
&chem
kemit = 1,
chem_opt = 300,
bioemdt = 0,
photdt = 0,
chemdt = 60,
io_style_emissions = 1,
emiss_opt = 5, 0,
emiss_opt_vol = 0, 0,
emiss_ash_hgt = 20000.,
chem_in_opt = 0, 0,
phot_opt = 0, 0,
gas_drydep_opt = 1, 1,
aer_drydep_opt = 1, 1,
bio_emiss_opt = 1, 0,
dust_opt = 0,
dmsemis_opt = 1,
seas_opt = 0,
depo_fact = 0.25
gas_bc_opt = 1, 0,
gas_ic_opt = 1, 0,
aer_bc_opt = 1, 0,
aer_ic_opt = 1, 0,
gaschem_onoff = 1, 0,
aerchem_onoff = 1, 0,
wetscav_onoff = 0, 0,
cldchem_onoff = 0, 0,
vertmix_onoff = 1, 0,
chem_conv_tr = 1, 0,
conv_tr_wetscav = 0, 0,
conv_tr_aqchem = 0, 0,
biomass_burn_opt = 1, 0,
plumerisefire_frq = 30, 0,
have_bcs_chem = .false., .false.,
aer_ra_feedback = 1,
aer_op_opt = 1,
opt_pars_out = 0,
diagnostic_chem = 0,
/
求大神帮我啊！！！我实在是不知道哪里出错了。。。我明明已经把cu_diag设成1了。。。 |
|
28 金钱
窥视卡
雷达卡
发表于 2016-9-14 12:30:12
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
{:eb513:}
楼主