爱气象,爱气象家园! 

气象家园

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 6211|回复: 2

求助,

[复制链接]
发表于 2013-9-24 11:08:39 | 显示全部楼层 |阅读模式

登录后查看更多精彩内容~

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
按照ZT 搞定Ubuntu: 单机WRF安装这篇文章搞了一下wrf。在安装过程中有个小小的问题,求助,本人新接触这个东东。
用ncdump命令检验netcdf安装是否成功时,出现
~/WRFV3$ ncdump
ncdump [-c|-h] [-v ...] [[-b|-f] [c|f]] [-l len] [-n name] [-p n[,n]] [-k] [-x] [-s] [-t|-i] [-g ...] [-w] file
  [-c]             Coordinate variable data and header information
  [-h]             Header information only, no data
  [-v var1[,...]]  Data for variable(s) <var1>,... only
  [-b [c|f]]       Brief annotations for C or Fortran indices in data
  [-f [c|f]]       Full annotations for C or Fortran indices in data
  [-l len]         Line length maximum in data section (default 80)
  [-n name]        Name for netCDF (default derived from file name)
  [-p n[,n]]       Display floating-point values with less precision
  [-k]             Output kind of netCDF file
  [-s]             Output special (virtual) attributes
  [-t]             Output time data as date-time strings
  [-i]             Output time data as date-time strings with ISO-8601 'T' separator
  [-g grp1[,...]]  Data and metadata for group(s) <grp1>,... only
  [-w]             With client-side caching of variables for DAP URLs
  [-x]             Output XML (NcML) instead of CDL
  file             Name of netCDF file (or URL if DAP access enabled)
netcdf library version 4.3.0 of Sep 22 2013 15:21:14 $
应该证明安装成功了,在configure时出现
Settings listed above are written to configure.wrf.
If you wish to change settings, please edit that file.
If you wish to change the default options, edit the file:
     arch/configure_new.defaults
grep: /home/ztftom/util/netcdf/include/netcdf.inc: 没有那个文件或目录
  

Testing for NetCDF, C and Fortran compiler

no entry netcdf.o in archive
This installation NetCDF is
C compiler is 32-bit
Fortran compiler is 32-bit
It will build in
去看看确实没有那个文件,请问怎么办啊?


密码修改失败请联系微信:mofangbao
发表于 2013-9-24 11:17:46 | 显示全部楼层
哈哈哈,那你就重新安装吧~~~我也遇到过~~~另外你要知道的是netcdf-4.3版本的C库与Fortran的分开发布的,你需要两个装在一起~~~不是很容易。如果你嫌麻烦,就安装合并在一起的netcdf4.1.3或者以前的版本~~~
密码修改失败请联系微信:mofangbao
发表于 2013-9-25 03:17:21 | 显示全部楼层
configure.wps里面一个函数的参数需要变一下,是因为linux内核不同造成函数语法不同的原因,具体的google一下就行。
密码修改失败请联系微信:mofangbao
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Copyright ©2011-2014 bbs.06climate.com All Rights Reserved.  Powered by Discuz! (京ICP-10201084)

本站信息均由会员发表,不代表气象家园立场,禁止在本站发表与国家法律相抵触言论

快速回复 返回顶部 返回列表