修改完namelist.wps中参数，运行geogrid.exe时出现错误，为什么

悠然一梦123

修改完namelist.wps中参数，运行geogrid.exe时，无法进行。出现这种情况，是为什么
GEOG_DATA_PATH    = /atm200/guest1/liuxr/WPS/geog
2015-04-03 09:54:16.500 ---   OPT_GEOGRID_TBL_PATH = geogrid/
2015-04-03 09:54:16.500 --- /
2015-04-03 09:54:16.525 --- Processing domain 1 of 2
2015-04-03 09:54:16.525 --- INFORM: Using 10m interpolator sequence for HGT_M.
2015-04-03 09:54:16.525 --- INFORM: Using 10m data source for HGT_M.
2015-04-03 09:54:16.525 --- ERROR: Could not open /atm200/guest1/liuxr/WPS/geog/topo_10m/index
求解答{:soso_e101:}

lifnju

地形文件错了，检查你下载的地形文件全不全，位置对不对

悠然一梦123

lifnju 发表于 2015-4-3 12:40
地形文件错了，检查你下载的地形文件全不全，位置对不对

确实是地形文件下载不全，重新下载就成功了，不好意思，我能再问你个问题，运行wrf.exe时出现下面提示[guest1@localhost run]$ ./wrf.exe
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist dfi_control not found in namelist.input. Using registry defaults for variables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables in tc
Namelist scm not found in namelist.input. Using registry defaults for variables in scm
Namelist fire not found in namelist.input. Using registry defaults for variables in fire
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      2, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to      4
WRF V3.4 MODEL
  *************************************
  Parent domain
  ids,ide,jds,jde             1          100            1           70
  ims,ime,jms,jme            -4          105           -4           75
  ips,ipe,jps,jpe             1          100            1           70
  *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
    alloc_space_field: domain             1 ,                 164115312  bytes allocated
   med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain        1:    0.35493 elapsed seconds.
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND           33  CATEGORIES            2  SEASONS
  WATER CATEGORY =            16  SNOW CATEGORY =            24
INITIALIZE THREE Noah LSM RELATED TABLES
  LANDUSE TYPE = USGS FOUND           27  CATEGORIES
  INPUT SOIL TEXTURE CLASSIFICATION = STAS
  SOIL TEXTURE CLASSIFICATION = STAS FOUND           19  CATEGORIES
-------------- FATAL CALLED ---------------
module_physics_init: use sfclay scheme for this pbl option
-------------------------------------------
FORTRAN STOP。这是为什么，好惆怅{:5_275:}

freekiller

sfclay和pbl不匹配

悠然一梦123

freekiller 发表于 2015-4-3 17:53
sfclay和pbl不匹配

可以说的详细点吗，需要改什么，刚学WRF，毕业论文搞这个，真焦心

lifnju

对啊 ，就是楼上说的“sfclay和pbl不匹配”
检查你namelist.input里面的表层和边界层参数化设置是否匹配，看着手册修改一下

weixurangy

楼主，我下载了JAN00_AWIP.tar.gz和geog_new3.8.tar.bz2，都出现了同样问题，请问完整的地形数据应该怎么下载？

悠然一梦123

weixurangy 发表于 2016-6-28 10:29
楼主，我下载了JAN00_AWIP.tar.gz和geog_new3.8.tar.bz2，都出现了同样问题，请问完整的地形数据应该怎么下 ...

地形文件不全，把complete那个地形文件也下了

weixurangy

悠然一梦123 发表于 2016-6-28 11:34
地形文件不全，把complete那个地形文件也下了

谢谢，我后来下载了geog_minimum，感觉那个complete文件没解压时就2G多，解压岂不是更大，我的硬盘没那么大

weixurangy

楼主您好，我想请教一个问题，得到了wrfout_d01_2000-02-24_12:00:00后，运行ARWpost.exe后得到了wrfout.ctl和wrfout.dat两个文件，接下来应该再进行什么操作？如果想以图形方式展示的话