CMAQ运行出错

weiweicf

CMAQ为5.1版本，运行cctm时报错，大神们有没有遇到过，报错如下：
Maximum eddy diffusivity of:   298.00     (m**2/sec)
     at col, row, layer:  12,  13,   9
     corresponding to a free tropospheric wind shear of:  1.52496E-03 (/sec),
                            a bulk Richardson Number of:  -57.063    ,
     and pot. temps. in layer and layer+1:   331.94       332.10   
     
after     VDIFF G  1.2115911E-01 A  2.6409203E+09 N  6.1846309E-05
after COUPLE_WR G  1.0499122E+03 A  2.5968779E+13 N  5.4023880E-01
after       ADV G  1.0500217E+03 A  2.5895234E+13 N  5.3976059E-01
     H-eddy DT & integration steps:   3.0000000E+02       1
after     HDIFF G  1.0500212E+03 A  2.5895234E+13 N  5.3976053E-01
after DECOUPLE_ G  1.2116676E-01 A  2.6329966E+09 N  6.1781553E-05
after   CLDPROC G  1.2115417E-01 A  2.6301373E+09 N  6.1762490E-05
        Processor 0000 is in darkness at  2016213:153500 GMT - no photolysis
after      CHEM G  1.2115306E-01 A  2.6301373E+09 N  6.1762490E-05
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f
Condensed amt. exceeds HNO3 conc: aero_subs.f
Condensed amt. exceeds NH3 conc: aero_subs.f

memorry60662

楼主大腿，作为初学小白，刚刚装好cmaq，然后怎么运行呀？？？有没有操作指南之类的

weiweicf

memorry60662 发表于 2016-10-13 16:07
楼主大腿，作为初学小白，刚刚装好cmaq，然后怎么运行呀？？？有没有操作指南之类的

我也是装上了按手册运行了测试用例，运行自己的就不会了

memorry60662

求大神指导config.cmaq里extra_lib是怎么设置的？为什么我在编译cctm的时候总是显示extra_lib: Undefined variable.

weiweicf

memorry60662 发表于 2016-10-25 16:01
求大神指导config.cmaq里extra_lib是怎么设置的？为什么我在编译cctm的时候总是显示extra_lib: Undefined v ...

setenv extra_lib "-L/public/software/intel/impi/4.1.0.024/intel64/lib -lmpiif"
这个好像是变过，在编译bcon、icon和cctm时不太一样，最后是这个样子的

3Esperanza

请问下我跑CCTM的时候出现这样的错误您知道是为什么吗？
*** ERROR ABORT in subroutine PT3D_INIT
     Could not open file "STK_EMIS_01".

aico

楼主能否解释一下问题什么原因，如何解决？谢谢

Mavisspku

请问您的问题解决了吗，我也遇到了这个问题

zhangjie_ouc

Mavisspku 发表于 2021-10-18 21:44
请问您的问题解决了吗，我也遇到了这个问题

请问您的问题是否已经解决？我也出现了此问题。