【求助】WRF运行后，ARWpost处理后出现问题

zyzhi

我也遇到同样的问题，链接：http://bbs.06climate.com/forum.php?mod=viewthread&tid=25282
用arwpost转出来时间纬度只有1，wrf部分应该没有问题，查找了arwpost的readme文件，发现namelist.ARWpost文件里&datatime下有一个tacc参数的解释是to account for time dritfing（seconds），它的默认设置是0，是不是这个地方应该设成和时次一样？

shangbn305

zyzhi 发表于 2014-6-17 14:50
我也遇到同样的问题，链接：http://bbs.06climate.com/forum.php?mod=viewthread&tid=25282
用arwpost转出 ...

具体的我也忘记了，不过我可以把我运行成功的namelist发给你看看，
&datetime
start_date = '2012-06-30_00:00:00',
end_date   = '2012-07-01_00:00:00',
interval_seconds = 86400,
tacc = 0,
debug_level = 0,
/

&io
io_form_input  = 2,
input_root_name = '/wrftest/WRFV3/run/wrfout_d02_2012*'
output_root_name = './test07'
plot = 'all_list'
fields = 'height,pressure,tk,tc,RAINNC,RAINC,T2'
output_type = 'grads'
mercator_defs = .true.
/
split_output = .true.
frames_per_outfile = 2

output_type = 'grads'
output_type = 'v5d'

plot = 'all'
plot = 'list'
plot = 'all_list'
! Below is a list of all available diagnostics
fields = 'height,geopt,theta,tc,tk,td,td2,rh,rh2,umet,vmet,pressure,u10m,v10m,wdir,wspd,wd10,ws10,slp,mcape,mc
in,lcl,lfc,cape,cin,dbz,max_dbz,clfr'


&interp
interp_method = 0,
interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100
.,
/
extrapolate = .true.

interp_method = 0,     ! 0 is model levels, -1 is nice height levels, 1 is user specified pressure/height

interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100
.,
interp_levels = 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.0, 11.0, 12.0, 13.0
, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0,

悠然一梦123

楼主，我想问下编辑ARWpost，对于domain1和domain2，interval_seconds是不是不一样，这个interval_seconds是怎么判定的，搞不懂啊

shangbn305

悠然一梦123 发表于 2015-4-7 10:19
楼主，我想问下编辑ARWpost，对于domain1和domain2，interval_seconds是不是不一样，这个interval_seconds ...

domain1和domain2是分别处理的，因为好久不用了，具体的有点忘记了，好像是根据自己需要设置

shrily521

!!!!!!!!!!!!!!!!
  ARWpost v3.1
!!!!!!!!!!!!!!!!
PGFIO-F-239/namelist read/unit=10/entity name is not member of group.
File name = namelist.ARWpost    formatted, sequential access   record = 9
In source file gridinfo_module.f, at line number 93
我的错误，同样求助。之前转成功了，然后我修改了namelist.ARWpost，之后再怎么修改都不对。我也不知道怎么改了。
&datetime
start_date = '2002-06-01_00:00:00',
end_date   = '2002-06-03_00:00:00',
interval_seconds = 10800,
tacc = 0,
debug_level = 0,
/
&io
io_form_input = 2
input_root_name = '/gpfshome/zhangsw/lishyi/Program/351/WRFV3
/run/wrfout_d01_2002-06*'
output_root_name = '/gpfshome/zhangsw/lishyi/Program/351/data
/dataoutput/wrfout_d01_2002-06'
plot = 'all_list'
fields = 'height,pressure,tk,tc,RAINNC,RAINC'
output_type =  'grads'
mercator_defs = .true.
/
split_output = .true.
frames_per_outfile = 2

output_type = 'grads'
output_type = 'v5d'

plot = 'all'
plot = 'list'
plot = 'all_list'
! Below is a list of all available diagnostics
fields = 'height,geopt,theta,tc,tk,td,td2,rh,rh2,umet,vmet,pressure,u10m,v10m,wdir,wspd,wd10,ws10,slp,mcape,mcin,lcl,lfc,cape,cin,dbz,max_dbz,clfr'


&interp
interp_method = 0, interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100.,
/
extrapolate = .true.
interp_method = 0,     ! 0 is model levels, -1 is nice height levels, 1 is user specified pressure/height
interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100., interp_levels = 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0,

shangbn305

shrily521 发表于 2015-6-10 11:04
!!!!!!!!!!!!!!!!
  ARWpost v3.1
!!!!!!!!!!!!!!!!

你好，你另开贴问问大家吧，我好久不弄这个了，忘记怎么弄了，不好意思。。

shangbn305

shrily521 发表于 2015-6-10 11:04
!!!!!!!!!!!!!!!!
  ARWpost v3.1
!!!!!!!!!!!!!!!!

记得当时是尝试修改了很多参数，时间，时间间隔等，还有变量。你可以尝试运行成功的案例，然后一点一点修改，不要一下子修改好几个参数

shrily521

shangbn305 发表于 2015-6-10 16:08
你好，你另开贴问问大家吧，我好久不弄这个了，忘记怎么弄了，不好意思。。

恩恩，我重新发了帖子

shrily521

shangbn305 发表于 2015-6-10 16:08
你好，你另开贴问问大家吧，我好久不弄这个了，忘记怎么弄了，不好意思。。

恩恩，我重新发了帖子，问了，还是谢谢

shrily521

shangbn305 发表于 2015-6-10 16:10
记得当时是尝试修改了很多参数，时间，时间间隔等，还有变量。你可以尝试运行成功的案例，然后一点一点修 ...

我按照别人的改了，就完全改成别人放上去的那样，还是有问题，我再试试吧，谢谢