4dvar运行da_wrfvar.exe出现报错，求助！！！

派Da星

运行da_wrfvar.exe后出现如下报错：
这是我的rsl.error.0000文件
taskid: 0 hostname: cn1537
da_module_io_quilt_old.F        2931 T
Namelist logging not found in namelist.input. Using registry defaults for varia
bles in logging.
Ntasks in X            8, ntasks in Y            8
*************************************
Parent domain
ids,ide,jds,jde            1         501           1         501
ims,ime,jms,jme           -4          70          -4          70
ips,ipe,jps,jpe            1          63           1          63
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              339028772 bytes allocated
   Input data is acceptable to use: fg
---------------------------- FATAL ERROR -----------------------
Fatal error in file:  da_med_initialdata_input.inc  LINE:     153
HYBRID_OPT =  2 in fg
4DVAR does not work with hybrid vertical coordinate
----------------------------------------------------------------
[cli_0]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0

以下是namelist.input
&wrfvar1
var4d=.true.,
/
&wrfvar2
/
&wrfvar3
ob_format=1
/
&wrfvar4
thin_conv          = .true.,
thin_conv_ascii  =.true.,
thin_mesh_conv =20,
/
&wrfvar5

/
&wrfvar6
max_ext_its=1,
ntmax=20, 20, 20,
eps=0.01,
orthonorm_gradient=.true.,
/
&wrfvar7
cv_options=7,
var_scaling1=1.0,
var_scaling2=1.0,
Var_scaling3=1.0,
var_scaling4=1.0,
var_scaling5=1.0,
len_scaling1=0.5,
len_scaling2=0.5,
len_scaling3=0.5,
len_scaling4=0.5,
len_scaling5=0.5,
/
&wrfvar8
/
&wrfvar9
/
&wrfvar10
/
&wrfvar11
cv_options_hum=1,
calculate_cg_cost_fn=.T.,
write_detail_grad_fn=.T.,
/
&wrfvar12
/
&wrfvar13
/
&wrfvar14
rtminit_nsensor=1,
rtminit_platform=23,
rtminit_satid=5,
rtminit_sensor=91,
thinning_mesh=60,
use_error_factor_rad=.F.,
thinning=.T.,
write_profile=.F.,
write_jacobian=.F.,
qc_rad=.T.,
write_iv_rad_ascii=.T.,
write_oa_rad_ascii=.T.,
rtm_option=1,
use_rttov_kmatrix=.T.,
crtm_cloud=.F.,
only_sea_rad=.F.,
varbc_scan=2,
use_varbc=.T.,
freeze_varbc=.F.,
varbc_nbgerr=5000,
varbc_nobsmin=10,
calc_weightfunc=.T.,
rttov_emis_atlas_mw=1,
use_crtm_kmatrix = .TRUE.,
/
&wrfvar15
/
&wrfvar16
/
&wrfvar17
/
&wrfvar18
analysis_date="2024-07-23_00:00:00.0000",
/
&wrfvar19
/
&wrfvar20
/
&wrfvar21
time_window_min="2024-07-23_00:00:00.0000",
/
&wrfvar22
time_window_max="2024-07-28_12:00:00.0000",
/
&time_control
run_hours=132,
start_year=2024,
start_month=07,
start_day=23,
start_hour=00,
end_year=2024,
end_month=07,
end_day=28,
end_hour=12,
interval_seconds=21600,
debug_level=0,
force_use_old_data=T
/
&domains
max_dom                             = 1,
e_we              = 501,742,589
e_sn              = 501,556,556
e_vert                              = 50,    50,   50,
dx                                  = 9000, 3000,  1000,
dy                                  = 9000, 3000,  1000,
i_parent_start             = 1,100,280,
j_parent_start             = 1,202,100,
parent_grid_ratio            = 1,     3,     3,

/
路过的大神帮忙看看

任性小王子

派Da星 发表于 2025-3-19 08:38
如果我在运行real的input加入&dynamics部分加入hybrid_opt=0与USE_THETA_M=0。又出现以下报错
taskid: 0 h ...

已经提示错误的地方了，你的输入文件hybrid_opt=0，但是你的namelist文件hybrid_opt=2，这里改成hybrid_opt = 0（在运行WRF时生成初始场时也要改）；还有你的输入文件use_theta_m =0，但是在Namelist 中use_theta_m   =1，也要设置use_theta_m = 0

派Da星

如果我在运行real的input加入&dynamics部分加入hybrid_opt=0与USE_THETA_M=0。又出现以下报错
taskid: 0 hostname: cn1537
da_module_io_quilt_old.F        2931 T
Namelist logging not found in namelist.input. Using registry defaults for varia
bles in logging.
Ntasks in X            8, ntasks in Y            8
*************************************
Parent domain
ids,ide,jds,jde            1         501           1         501
ims,ime,jms,jme           -4          70          -4          70
ips,ipe,jps,jpe            1          63           1          63
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              339028772 bytes allocated
   Input data is acceptable to use: fg
   ---- ERROR: Input file hybrid_opt =            0
   ---- ERROR: Namelist hybrid_opt   =            2
  ---- ERROR: hybrid_opt values must be consistent
   ---- ERROR: Input file use_theta_m =            0
   ---- ERROR: Namelist use_theta_m   =            1
  ---- ERROR: use_theta_m values must be consistent
NOTE:       2 namelist vs input data inconsistencies found.
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:    1115
NOTE:  Please check and reset these options
-------------------------------------------
[cli_0]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0

派Da星

任性小王子 发表于 2025-3-19 09:03
已经提示错误的地方了，你的输入文件hybrid_opt=0，但是你的namelist文件hybrid_opt=2，这里改成hybrid_o ...

谢谢
在namelist.input.4dvar也要设置hybrid_opt=0与USE_THETA_M=0吗，它出现了这个报错DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              339028772 bytes allocated
   Input data is acceptable to use: fg
   ---- ERROR: Input file hybrid_opt =            0
   ---- ERROR: Namelist hybrid_opt   =            2
  ---- ERROR: hybrid_opt values must be consistent
   ---- ERROR: Input file use_theta_m =            0
   ---- ERROR: Namelist use_theta_m   =            1
  ---- ERROR: use_theta_m values must be consistent
NOTE:       2 namelist vs input data inconsistencies found.

派Da星

任性小王子 发表于 2025-3-19 09:03
已经提示错误的地方了，你的输入文件hybrid_opt=0，但是你的namelist文件hybrid_opt=2，这里改成hybrid_o ...

谢谢谢谢，解决了

任性小王子

派Da星 发表于 2025-3-19 10:36
谢谢谢谢，解决了

ok，解决了就好

派Da星

任性小王子 发表于 2025-3-19 09:03
已经提示错误的地方了，你的输入文件hybrid_opt=0，但是你的namelist文件hybrid_opt=2，这里改成hybrid_o ...

谢谢，解决了

派Da星

遇到一个新的问题，报错如下：
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              339028772 bytes allocated
   Input data is acceptable to use: fg
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE   1 IS      1 IE     63 JS      1 JE     63
WRF NUMBER OF TILES =   1
--------------------------- WARNING ---------------------------
WARNING FROM FILE:  da_read_obs_bufrgpsro.inc  LINE:     115
Error   29 opening PREPBUFR obs file gpsro.bufr
---------------------------------------------------------------
--------------------------- WARNING ---------------------------
WARNING FROM FILE:  da_read_obs_bufr_satwnd.inc  LINE:     171
satwnd.bufr does not exist.
---------------------------------------------------------------
---------------------------- FATAL ERROR -----------------------
Fatal error in file:  da_setup_be_regional.inc  LINE:     228
Error in reading be.dat, unit=  26
----------------------------------------------------------------
[cli_0]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0

派Da星

遇到一个新的问题，报错如下：
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              339028772 bytes allocated
   Input data is acceptable to use: fg
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE   1 IS      1 IE     63 JS      1 JE     63
WRF NUMBER OF TILES =   1
--------------------------- WARNING ---------------------------
WARNING FROM FILE:  da_read_obs_bufrgpsro.inc  LINE:     115
Error   29 opening PREPBUFR obs file gpsro.bufr
---------------------------------------------------------------
--------------------------- WARNING ---------------------------
WARNING FROM FILE:  da_read_obs_bufr_satwnd.inc  LINE:     171
satwnd.bufr does not exist.
---------------------------------------------------------------
---------------------------- FATAL ERROR -----------------------
Fatal error in file:  da_setup_be_regional.inc  LINE:     228
Error in reading be.dat, unit=  26
----------------------------------------------------------------
[cli_0]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0

派Da星

任性小王子 发表于 2025-3-19 09:03
已经提示错误的地方了，你的输入文件hybrid_opt=0，但是你的namelist文件hybrid_opt=2，这里改成hybrid_o ...

大佬，我又遇到一个问题，感谢帮忙。
报错如下：
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              339028772 bytes allocated
   Input data is acceptable to use: fg
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE   1 IS      1 IE     63 JS      1 JE     63
WRF NUMBER OF TILES =   1
--------------------------- WARNING ---------------------------
WARNING FROM FILE:  da_read_obs_bufrgpsro.inc  LINE:     115
Error   29 opening PREPBUFR obs file gpsro.bufr
---------------------------------------------------------------
--------------------------- WARNING ---------------------------
WARNING FROM FILE:  da_read_obs_bufr_satwnd.inc  LINE:     171
satwnd.bufr does not exist.
---------------------------------------------------------------
---------------------------- FATAL ERROR -----------------------
Fatal error in file:  da_setup_be_regional.inc  LINE:     228
Error in reading be.dat, unit=  26
----------------------------------------------------------------
[cli_0]: aborting job:
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 0