求助！！！转wrf的时候，wrfout只出现一个时次，rsl.error.0000文件中没有报错信息...

Sunshining

啊啊啊啊要疯辽啊，转wrf怎么都是只出现一个时次的wrfout，求大神解答这是为什么啊
分割线下面是运行wrf.exe后的rsl.error.0000文件：

--------------------------------------------------------------------------------------------------------------------------------------------------
taskid: 0 hostname: cmb03n19
module_io_quilt_old.F 2931 F
Quilting with   1 groups of   0 I/O tasks.
Ntasks in X  10 , ntasks in Y  16
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
Need MYNN PBL for icloud_bl = 1, resetting to 0
*************************************
No physics suite selected.
Physics options will be used directly from the namelist.
*************************************
--- NOTE: RRTMG radiation is in use, setting:  levsiz=59, alevsiz=12, no_src_types=6
--- NOTE: num_soil_layers has been set to      4
WRF V3.9.1.1 MODEL
  wrf: calling alloc_and_configure_domain
*************************************
Parent domain
ids,ide,jds,jde  1 301 1 201
ims,ime,jms,jme  -4 37 -4 20
ips,ipe,jps,jpe  1 30 1 13
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain  1 ,  222745060  bytes allocated
  wrf: calling model_to_grid_config_rec
  wrf: calling set_scalar_indices_from_config
  wrf: calling init_wrfio
  Entering ext_gr1_ioinit
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-13_00:00:00]
   DEBUG wrf_timeinttoa():  returning with str = [0000000000_000:000:018]
DEBUG setup_timekeeping():  clock after creation,  clock start time = 2013-06-03_00:00:00
DEBUG setup_timekeeping():  clock after creation,  clock current time = 2013-06-03_00:00:00
DEBUG setup_timekeeping():  clock after creation,  clock stop time = 2013-06-13_00:00:00
DEBUG setup_timekeeping():  clock after creation,  clock time step = 0000000000_000:000:018
   setup_timekeeping:  set xtime to  0.0000000000E+00
   setup_timekeeping:  set julian to  153.0000000
  setup_timekeeping:  returning...
  wrf main: calling open_r_dataset for wrfinput
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
  med_initialdata_input: calling input_input
  mminlu = 'USGS'
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-13_00:00:00]
   DEBUG wrf_timeinttoa():  returning with str = [0000000000_000:000:018]
DEBUG input_wrf():  get CurrTime from clock,  clock start time = 2013-06-03_00:00:00
DEBUG input_wrf():  get CurrTime from clock,  clock current time = 2013-06-03_00:00:00
DEBUG input_wrf():  get CurrTime from clock,  clock stop time = 2013-06-13_00:00:00
DEBUG input_wrf():  get CurrTime from clock,  clock time step = 0000000000_000:000:018
  med_initialdata_input: back from input_input
Timing for processing wrfinput file (stream 0) for domain        1:    2.97569 elapsed seconds
   checking boundary conditions for grid
   boundary conditions OK for grid
Max map factor in domain 1 =  1.01. Scale the dt in the model accordingly.
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG wrf_timetoa():  returning with str = [2013-06-13_00:00:00]
   DEBUG wrf_timeinttoa():  returning with str = [0000000000_000:000:018]
DEBUG domain_setgmtetc():  get simStartTime from clock,  clock start time = 2013-06-03_00:00:00
DEBUG domain_setgmtetc():  get simStartTime from clock,  clock current time = 2013-06-03_00:00:00
DEBUG domain_setgmtetc():  get simStartTime from clock,  clock stop time = 2013-06-13_00:00:00
DEBUG domain_setgmtetc():  get simStartTime from clock,  clock time step = 0000000000_000:000:018
   DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
   DEBUG domain_setgmtetc():  simulation start time = [2013-06-03_00:00:00]
   DEBUG domain_setgmtetc():  julyr,hr,mn,sec,ms,julday =  2013 0 0 0 0 154
   DEBUG domain_setgmtetc():  gmt =  0.0000000000E+00
  start_domain_em: Before call to phy_init
  WRF TILE   1 IS      1 IE     30 JS      1 JE     13
  set_tiles3: NUMBER OF TILES =   1
  top of phy_init
   phy_init:  start_of_simulation =  T
  calling nl_get_iswater, nl_get_isice, nl_get_mminlu_loc
  after nl_get_iswater, nl_get_isice, nl_get_mminlu_loc
  module_start: phy_init: Before call to landuse_init
  top of landuse_init
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND 33  CATEGORIES 2  SEASONS WATER CATEGORY =  16  SNOW CATEGORY =  24
  returning from of landuse_init
  module_start: phy_init: Before call to ra_init
  Do not have ozone.  Must read it in.
  Master rank reads ozone.
   num_months =  13
  Broadcast ozone to other ranks.
  module_start: phy_init: Before call to bl_init
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19  CATEGORIES
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
  module_start: phy_init: Before call to cu_init
  module_start: phy_init: Before call to shcu_init
  module_start: phy_init: Before call to mp_init
    Apparently there are no initial CCN aerosols.
      checked column at point (i,j) =  1 1
    Apparently there are no initial IN aerosols.
      checked column at point (i,j) =  1 1
      aerosol surface flux emission scale factor is:  0.1511718780
  CREATING MICROPHYSICS LOOKUP TABLES ...
   using: mu_c=12.00 mu_i= 0.00 mu_r= 0.00 mu_g= 0.00
    calling table_ccnAct routine
  module_mp_thompson: opening CCN_ACTIVATE.BIN on unit 20
    creating qc collision eff tables
    creating rain evap table
    creating rain collecting graupel table
ThompMP: read qr_acr_qg.dat stead of computing
    creating rain collecting snow table
ThompMP: read qr_acr_qs.dat instead of computing
    creating freezing of water drops table
ThompMP: read freezeH2O.dat stead of computing
    creating ice converting to snow table
   ... DONE microphysical lookup tables
  module_start: phy_init: Before call to fg_init
  module_start: phy_init: Before call to fdob_init
  start_domain_em: After call to phy_init
  start_em: calling lightning_init
  start_em: after calling lightning_init
  calling inc/HALO_EM_INIT_1_inline.inc
  calling inc/HALO_EM_INIT_2_inline.inc
  calling inc/HALO_EM_INIT_3_inline.inc
  calling inc/HALO_EM_INIT_4_inline.inc
  calling inc/HALO_EM_INIT_5_inline.inc
  calling inc/PERIOD_BDY_EM_INIT_inline.inc
  calling inc/PERIOD_BDY_EM_MOIST_inline.inc
  calling inc/PERIOD_BDY_EM_TKE_inline.inc
  calling inc/PERIOD_BDY_EM_SCALAR_inline.inc
  calling inc/PERIOD_BDY_EM_CHEM_inline.inc
  calling inc/HALO_EM_INIT_1_inline.inc
  calling inc/HALO_EM_INIT_2_inline.inc
  calling inc/HALO_EM_INIT_3_inline.inc
  calling inc/HALO_EM_INIT_4_inline.inc
  calling inc/HALO_EM_INIT_5_inline.inc
  calling inc/PERIOD_BDY_EM_INIT_inline.inc
  calling inc/PERIOD_BDY_EM_MOIST_inline.inc
  calling inc/PERIOD_BDY_EM_TKE_inline.inc
  calling inc/PERIOD_BDY_EM_SCALAR_inline.inc
  calling inc/PERIOD_BDY_EM_CHEM_inline.inc
  start_domain_em: Returning
  wrf: calling integrate
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-13_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timeinttoa():  returning with str = [0000000000_000:000:018]
DEBUG:  top of integrate(),  clock start time = 2013-06-03_00:00:00
DEBUG:  top of integrate(),  clock current time = 2013-06-03_00:00:00
DEBUG:  top of integrate(),  clock stop time = 2013-06-13_00:00:00
DEBUG:  top of integrate(),  clock time step = 0000000000_000:000:018
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00 open_hist_w : opening /cmb/g7/JOB_TMP/luoyl/sxy_control/wrfout_d01_2013-06-03_00:00:00 for writing.
d01 2013-06-03_00:00:00 calling wrf_open_for_write_begin in open_w_dataset
d01 2013-06-03_00:00:00  module_io.F: in wrf_open_for_write_begin, FileName = /cmb/g7/JOB_TMP/luoyl/sxy_control/wrfout_d01_2013-06-03_00:00:00
d01 2013-06-03_00:00:00 calling outsub in open_w_dataset
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-13_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timeinttoa():  returning with str = [0000000000_000:000:018]
DEBUG output_wrf():  before call to domain_clock_get,  clock start time = 2013-06-03_00:00:00
DEBUG output_wrf():  before call to domain_clock_get,  clock current time = 2013-06-03_00:00:00
DEBUG output_wrf():  before call to domain_clock_get,  clock stop time = 2013-06-13_00:00:00
DEBUG output_wrf():  before call to domain_clock_get,  clock time step = 0000000000_000:000:018
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00 back from outsub in open_w_dataset
d01 2013-06-03_00:00:00 calling wrf_open_for_write_commit in open_w_dataset
d01 2013-06-03_00:00:00  Information: NOFILL being set for writing to /cmb/g7/JOB_TMP/luoyl/sxy_control/wrfout_d01_2013-06-03_00:00:00
d01 2013-06-03_00:00:00 back from wrf_open_for_write_commit in open_w_dataset
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-13_00:00:00]
d01 2013-06-03_00:00:00  DEBUG wrf_timeinttoa():  returning with str = [0000000000_000:000:018]
DEBUG output_wrf():  before call to domain_clock_get,  clock start time = 2013-06-03_00:00:00
DEBUG output_wrf():  before call to domain_clock_get,  clock current time = 2013-06-03_00:00:00
DEBUG output_wrf():  before call to domain_clock_get,  clock stop time = 2013-06-13_00:00:00
DEBUG output_wrf():  before call to domain_clock_get,  clock time step = 0000000000_000:000:018
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  med_hist_out: opened /cmb/g7/JOB_TMP/luoyl/sxy_control/wrfout_d01_2013-06-03_00:00:00 as DATASET=HISTORY
mediation_integrate.G 1728 DATASET=HISTORY
mediation_integrate.G 1729  grid%id  1  grid%oid  1
Timing for Writing /cmb/g7/JOB_TMP/luoyl/sxy_control/wrfout_d01_2013-06-03_00:00:00 for domain        1:    3.14825 elapsed seconds
d01 2013-06-03_00:00:00 in med_latbound_in
d01 2013-06-03_00:00:00 in med_latbound_in preparing to read
d01 2013-06-03_00:00:00  Opening: wrfbdy_d01
d01 2013-06-03_00:00:00 med_latbound_in: calling input_boundary
d01 2013-06-03_00:00:00 mminlu = 'USGS'
Timing for processing lateral boundary for domain        1:    4.27272 elapsed seconds
d01 2013-06-03_00:00:00 module_integrate: calling solve interface
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE   1 IS      1 IE     30 JS      1 JE     13
WRF NUMBER OF TILES =   1
d01 2013-06-03_00:00:00  grid spacing, dt, time_step_sound= 3000.000000 18.00000000 4
d01 2013-06-03_00:00:00  call rk_step_prep
d01 2013-06-03_00:00:00 calling inc/HALO_EM_A_inline.inc
d01 2013-06-03_00:00:00 calling inc/PERIOD_BDY_EM_A_inline.inc
d01 2013-06-03_00:00:00  call rk_phys_bc_dry_1
d01 2013-06-03_00:00:00  call init_zero_tendency
d01 2013-06-03_00:00:00 calling inc/HALO_EM_PHYS_A_inline.inc
d01 2013-06-03_00:00:00  call phy_prep
d01 2013-06-03_00:00:00  DEBUG wrf_timetoa():  returning with str = [2013-06-03_00:00:00]
d01 2013-06-03_00:00:00  call radiation_driver
d01 2013-06-03_00:00:00  Grid spacing in km  3000.000000 3000.000000 4.242640972
d01 2013-06-03_00:00:00 Top of Radiation Driver
d01 2013-06-03_00:00:00 DEBUG: using gthompsn cloud fraction scheme
d01 2013-06-03_00:00:00 CALL rrtmg_lw
d01 2013-06-03_00:00:00 CALL rrtmg_sw
d01 2013-06-03_00:00:00 calling inc/HALO_PWP_inline.inc
d01 2013-06-03_00:00:00  call surface_driver
d01 2013-06-03_00:00:00 in MYJSFC
d01 2013-06-03_00:00:00 in NOAHMP DRV
d01 2013-06-03_00:00:00  call pbl_driver
d01 2013-06-03_00:00:00 in MYJPBL
d01 2013-06-03_00:00:00  call cumulus_driver
d01 2013-06-03_00:00:00  call shallow_cumulus_driver
d01 2013-06-03_00:00:00 calling inc/HALO_EM_FDDA_SFC_inline.inc
d01 2013-06-03_00:00:00  call fddagd_driver
d01 2013-06-03_00:00:00  call calculate_phy_tend
d01 2013-06-03_00:00:00  call compute_diff_metrics
d01 2013-06-03_00:00:00 calling inc/HALO_EM_TKE_C_inline.inc
d01 2013-06-03_00:00:00 calling inc/PERIOD_BDY_EM_A1_inline.inc
d01 2013-06-03_00:00:00  call bc for diffusion_metrics
d01 2013-06-03_00:00:00  call cal_deform_and_div
d01 2013-06-03_00:00:00 calling inc/HALO_EM_HELICITY_inline.inc
Communication statistics of task 0 is associated with task key: 416306652_0


搜到论坛里一个帖子，说是将前面的气象场重新处理一遍，可是我把前面的重新做过之后还是这样只出现一个时次的wrfout，求助啊

supersupergirl

你好 请问解决了吗

Sunshining

supersupergirl 发表于 2019-7-8 10:24
你好 请问解决了吗

解决了，是前面WPS场的问题，geogrid的输出可能插值的时候有错误，经过仔细检查发现geo_em.d01.nc是不对的

supersupergirl

Sunshining 发表于 2019-7-9 10:46
解决了，是前面WPS场的问题，geogrid的输出可能插值的时候有错误，经过仔细检查发现geo_em.d01.nc是不对 ...

好的 感谢 不过怎么查出来geo01.nc出问题的哇

Sunshining

supersupergirl 发表于 2019-7-9 13:57
好的 感谢 不过怎么查出来geo01.nc出问题的哇

输出或者画图哇，值不对

supersupergirl

Sunshining 发表于 2019-7-9 15:54
输出或者画图哇，值不对

好的呢 谢谢啦

lianfang1308

遇到过此类问题，一般原因极大概率是因为WPS生成的met_em文件有问题，建议重新基于run的wrf包，重新编译wps，或者在wps version3.9之后根据官网要求，替换ungrib和metgrib等文件之后重新编译。

momo和nono

Sunshining 发表于 2019-7-9 15:54
输出或者画图哇，值不对

你好，我查看变量geo文件里times变量是unlimtted，是有问题的吗