CLM4创建地表数据求解？

奥兰多

在tools/README里面有这一句
To run a program with a namelist:
        ./program < namelist

输入  ./mkgriddata < mkgriddata.namelist后，出现如下内容，
Attempting to initialize control settings .....
Attempting to create grid dataset .....
Setting grid from navy oro file
/snfs01/chenxl/inputdata/lnd/clm2/rawdata/surfdata_1x1_c130721.nc
  
read_domain read lsmlon and lsmlat dims
read_domain initialized domain
read_domain read LONGXY and LATIXY fields
read_domain read EDGE[NESW]
read_domain read LAT[NS],LON[WE]
read_domain read AREA
read_domain check nesw consistent with center
read_domain done
celledge, using celledge_regional
cellarea, using cellarea_global
  
create_grid- ddomain:
  
domain_check domain_set= domain_set
domain_check ni,nj     =          144          96
domain_check edgeNESW  =    90.0000000000000        358.750000000000     
  -90.0000000000000       -1.25000000000000     
domain_check longxy =   0.000000000000000E+000   357.500000000000     
domain_check latixy =   -90.0000000000000        90.0000000000000     
domain_check mask   =   2147483647  2147483647
domain_check frac   =   -9999.00000000000       -9999.00000000000     
domain_check topo   =   0.000000000000000E+000  0.000000000000000E+000
domain_check area   =    242.111419548084        58561.1678512925     
domain_check latn   =   -89.0526315789474        90.0000000000000     
domain_check lone   =    1.25000000000000        358.750000000000     
domain_check lats   =   -90.0000000000000        89.0526315789474     
domain_check lonw   =   -1.25000000000000        356.250000000000     
AREAINI warning: conservation check not valid for
    input  grid of          144  x           96
    output grid of            1  x            1
  
ddomain_to_ldomain:
  
gridmap_checkmap name         = areaini
gridmap_checkmap type         = global
gridmap_checkmap src grid     =          144          96
gridmap_checkmap dst grid     =            1           1
gridmap_checkmap mx_ovr        =            4
gridmap_checkmap n_ovr min/max =            4           4
gridmap_checkmap i_ovr min/max =           37          38
gridmap_checkmap j_ovr min/max =           65          66
gridmap_checkmap a_ovr min/max =    2658.76057872212     
   20648.0155746263     
gridmap_checkmap w_ovr min/max =   6.305535585345654E-002
  0.489689812668855     
gridmap_checkmap wsum min/max =    1.00000000000000     
   1.00000000000000     
MKGRID error: fland out of bounds [0,1]   -9999.00000000000     
  -9999.00000000000     

最后一句报错，请问这是什么原因？我是按照README一步一步做的，到这做不下去了。

又是那隻貓

请高手解答

奥兰多

又是那隻貓 发表于 2013-7-23 06:59

                               
登录/注册后可看大图

请高手解答

经指点，问题成功解决，原来是的数据没下全，重新下载到mkgriddata.singlept后运行成功。
Attempting to initialize control settings .....
Attempting to create grid dataset .....
Setting grid from navy oro file
/snfs01/chenxl/inputdata/lnd/clm2/rawdata/mksrf_navyoro_20min.c010129.nc
  
read_domain read lon and lat dims
read_domain initialized domain
read_domain read LONGXY and LATIXY fields
read_domain read EDGE[NESW]
read_domain read LANDFRAC
read_domain compute lat[ns],lon[we] from edge[nesw]
celledge, using celledge_regional
read_domain check nesw consistent with center
read_domain compute cellarea with edge[nesw]
cellarea, using cellarea_global
read_domain done
celledge, using celledge_regional
cellarea, using cellarea_global
  
create_grid- ddomain:
  
domain_check domain_set= domain_set
domain_check ni,nj     =         1080         540
domain_check edgeNESW  =    90.0000000000000        360.000000000000     
  -90.0000000000000       0.000000000000000E+000
domain_check longxy =   0.166666671633720        359.833343505859     
domain_check latixy =   -89.8333358764648        89.8333358764648     
domain_check mask   =            0           1
domain_check frac   =   0.000000000000000E+000   1.00000000000000     
domain_check topo   =   0.000000000000000E+000  0.000000000000000E+000
domain_check area   =    3.99649293133019        1373.89968401693     
domain_check latn   =   -89.6666679382324        90.0000000000000     
domain_check lone   =   0.333333333333333        360.000000000000     
domain_check lats   =   -90.0000000000000        89.6666679382324     
domain_check lonw   =   0.000000000000000E+000   359.666666666667     
AREAINI warning: conservation check not valid for
    input  grid of         1080  x          540
    output grid of            1  x            1
  
ddomain_to_ldomain:
  
gridmap_checkmap name         = areaini
gridmap_checkmap type         = global
gridmap_checkmap src grid     =         1080         540
gridmap_checkmap dst grid     =            1           1
gridmap_checkmap mx_ovr        =           36
gridmap_checkmap n_ovr min/max =           36          36
gridmap_checkmap i_ovr min/max =          913         918
gridmap_checkmap j_ovr min/max =          247         252
gridmap_checkmap a_ovr min/max =    1361.08486052004     
   1365.95523159658     
gridmap_checkmap w_ovr min/max =   2.772659709543203E-002
  2.782581120063693E-002
gridmap_checkmap wsum min/max =    1.00000000000000     
   1.00000000000000     
Successfully made land grid data

create_grid- ldomain:
  
domain_check domain_set= domain_set
domain_check ni,nj     =            1           1
domain_check edgeNESW  =   -6.00000000000000        306.000000000000     
  -8.00000000000000        304.000000000000     
domain_check longxy =    305.000000000000        305.000000000000     
domain_check latixy =   -7.00000000000000       -7.00000000000000     
domain_check mask   =            1           1
domain_check frac   =    1.00000000000000        1.00000000000000     
domain_check topo   =   0.000000000000000E+000  0.000000000000000E+000
domain_check area   =    49089.5026113492        49089.5026113492     
domain_check latn   =   -6.00000000000000       -6.00000000000000     
domain_check lone   =    306.000000000000        306.000000000000     
domain_check lats   =   -8.00000000000000       -8.00000000000000     
domain_check lonw   =    304.000000000000        304.000000000000     
Write land grid file:./griddata_0001x0001.nc
Write land frac file:./fracdata_0001x0001.nc
------------------------------------------------------------
Successfully created land model grid data set 360.0 by 180.0 grid

Ruby

奥兰多 发表于 2013-7-23 11:43
经指点，问题成功解决，原来是的数据没下全，重新下载到mkgriddata.singlept后运行成功。
Attempting to ...

CLM4.5如何创建地表数据呢 老是过不去这一块

servicewangyuqi

Ruby 发表于 2014-7-17 09:51
CLM4.5如何创建地表数据呢 老是过不去这一块

4.5要怎么下载安装呢？ 有没有具体的教程？不胜感激~~~