有关WRF中的嵌套问题，看到一篇博文就贴过来分享，跟我一样刚入门的可以看一下

diandian · 发表于 2015-7-1 08:57:25

zhangxiao 发表于 2015-6-30 21:16
可以看看wrf的手册，上面进行了描述

谢谢指点哈

novelbean · 发表于 2015-11-23 09:50:38

感谢楼主！！！

悠然一梦123 · 发表于 2016-7-12 09:38:16

楼主，请问e_we = 10, 16, 19,
e_sn = 10, 16, 19,
，第二层的16是哪里来的

gisorange · 发表于 2016-12-26 15:23:07

{:5_235:}

wangfei · 发表于 2017-8-15 09:15:39

多谢

小莹子 · 发表于 2017-12-8 10:38:14

你好，我按照您的方法，想尝试做一下嵌套，但是出现
Warning: Western edge of grid must be at least 5 grid points from mother domain!
(0) Warning: Southern edge of grid must be at least 5 grid points from mother domain!
(0) Warning: Eastern edge of grid must be at least 5 grid points from mother domain!
(0) Warning: Northern edge of grid must be at least 5 grid points from mother domain!
(0) Warning: Inner nest (domain = 2) is not fully contained in mother nest (domain = 1)!
(0) For the current setup of mother domain = 1, you can only have a nest of size 10X10. Stopping Program!
我是初学者，然后对于e_we.e_sn的设置不太懂，然后也不太清楚该往哪个方向修改。谢谢，期待您的回复

		自动登录	找回密码
密码			立即注册