小白求助！用ARWpost转出的数据画不出图

tanshuai

我的namelist.ARWpost如下
&datetime
start_date = '2011-07-28_00:00:00',
end_date   = '2011-08-09_00:00:00',
interval_seconds = 21600,
tacc = 0,
debug_level = 0,
/

&io
input_root_name = '/home/user2/windfield/Muifa/ctrl-run/wrfout_d01_2011-0*'
output_root_name = '/home/user2/windfield/Muifa/ctrl-run/data2/mcrtl'
plot = 'all_list'
fields = 'height,pressure,slp,tk,tc'
mercator_defs = .true.
split_output = .true.
frames_per_outfile = 24
/
split_output = .true.
frames_per_outfile = 2


plot = 'all'
plot = 'list'
plot = 'all_list'
! Below is a list of all available diagnostics
fields = 'height,geopt,theta,tc,tk,td,td2,rh,rh2,umet,vmet,pressure,u10m,v10m,wdir,wspd,wd10,ws10,slp,mcape,mcin,lcl,lfc,cape,cin,dbz,max_dbz,clfr'


&interp
interp_method = 1,
interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100.,
/
extrapolate = .true.

interp_method = 1,     ! 0 is model levels, -1 is nice height levels, 1 is user specified pressure/height

interp_levels = 1000.,950.,900.,850.,800.,750.,700.,650.,600.,550.,500.,450.,400.,350.,300.,250.,200.,150.,100.,
interp_levels = 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0,