- 积分
- 94
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2015-7-22
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看，没有帐号？立即注册
x
&time_control
run_days = 0,
run_hours = 6,
run_minutes = 0,
run_seconds = 0,
start_year = 2014, 2014, 2014, 2014,
start_month = 10, 10, 10, 10,
start_day = 31, 31, 31, 31,
start_hour = 12, 12, 12, 12,
start_minute = 00, 00, 00, 00,
start_second = 00, 00, 00, 00,
end_year = 2014, 2014, 2014, 2014,
end_month = 10, 10, 10, 10,
end_day = 31, 31, 31, 31,
end_hour = 18, 18, 18, 18,
end_minute = 00, 00, 00, 00,
end_second = 00, 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,.true.,
history_interval = 180, 60, 60, 60,
frames_per_outfile = 1000, 1000, 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 4860,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 4,
e_we = 89, 109, 187, 265,
e_sn = 78, 91, 151, 202,
e_vert = 28, 28, 28, 28,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 81000, 27000, 9000, 3000,
dy = 81000, 27000, 9000, 3000,
grid_id = 1, 2, 3, 4,
parent_id = 0, 1, 2, 3,
i_parent_start = 1, 25, 23, 64,
j_parent_start = 1, 19, 20, 27,
parent_grid_ratio = 1, 3, 3, 3,
parent_time_step_ratio = 1, 3, 3, 3,
feedback = 1,
smooth_option = 0
/
&physics
mp_physics = 3, 3, 3, 3,
ra_lw_physics = 1, 1, 1, 1,
ra_sw_physics = 1, 1, 1, 1,
radt = 30, 30, 30, 30,
sf_sfclay_physics = 1, 1, 1, 1,
sf_surface_physics = 1, 1, 1, 1,
bl_pbl_physics = 1, 1, 1, 1,
bldt = 0, 0, 0, 0,
cu_physics = 1, 1, 1, 0,
cudt = 0, 0, 0, 0,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0, 0, 0, 0,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 2, 2, 2, 2,
diff_6th_factor = 0.12, 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2 0.2,
khdif = 0, 0, 0, 0,
kvdif = 0, 0, 0, 0,
non_hydrostatic = .true., .true., .true.,.true.,
moist_adv_opt = 1, 1, 1, 1,
scalar_adv_opt = 1, 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,.false.,
nested = .false., .true., .true.,.true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
&dfi_control
dfi_opt = 3
dfi_opt = 3
dfi_nfilter = 7
dfi_write_filtered_input = .false.
dfi_write_dfi_history = .false.
dfi_cutoff_seconds = 3600
dfi_time_dim = 1000
dfi_bckstop_year = 2014
dfi_bckstop_month = 10
dfi_bckstop_day = 31
dfi_bckstop_hour = 12
dfi_bckstop_minute = 00
dfi_bckstop_second = 00
dfi_fwdstop_year = 2014
dfi_fwdstop_month = 10
dfi_fwdstop_day = 31
dfi_fwdstop_hour = 18
dfi_fwdstop_minute = 00
dfi_fwdstop_second = 00
/
real case执行报错如下
taskid: 0 hostname: mgr
Error reading namelist &logging from namelist.input. Using default logging config.
Namelist tc not found in namelist.input. Using registry defaults for variables
in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables
in scm
Namelist fire not found in namelist.input. Using registry defaults for variable
s in fire
Namelist diags not found in namelist.input. Using registry defaults for variables in diags
N tasks in X 2, n tasks in Y 2
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval an
d ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval an
d ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 3, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 3, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 3, setting obs nudging interval an
d ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 4, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 4, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 4, setting obs nudging interval an
d ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to 5
REAL_EM V3.4.1 PREPROCESSOR
*************************************
Parent domain
ids,ide,jds,jde 1 89 1 78
ims,ime,jms,jme -4 51 -4 46
ips,ipe,jps,jpe 1 44 1 39
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1, 64130888 bytes allocat
ed
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 404
error opening met_em.d01.2014-10-31_12:00:00.nc for input; bad date in namelist
or file not in directory
-------------------------------------------
求大牛指教！！！
|
|
窥视卡
雷达卡
发表于 2015-7-22 22:05:56
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2015-7-22 23:39:01
楼主