- 积分
- 263
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2017-4-12
- 最后登录
- 1970-1-1
|
楼主 |
发表于 2017-4-16 14:53:09
|
显示全部楼层
这次还真不是了，改了没有用，您看看：
以下是我出现的 问题 和 namelist.input
第一部分-问题：
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: RRTMG radiation is not used, setting: o3input=0 to avoid data pre-processing
--- NOTE: num_soil_layers has been set to 5
WRF V3.7 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 100 1 57
ims,ime,jms,jme -4 105 -4 62
ips,ipe,jps,jpe 1 100 1 57
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 958085044 bytes allocated
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 0.02687 elapsed seconds
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 16 SNOW CATEGORY = 24
*********************************************************************
* PROGRAM:WRF/CHEM V3.7 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
Timing for Writing wrfout_d01_2016-04-01_00:00:00 for domain 1: 0.30046 elapsed seconds
open_aux_u : error opening auxinput5_d01_2016-04-01_00:00:00 for reading. 100
d01 2016-04-01_00:00:00 Input data processed for aux input 5 for domain 1
Timing for processing lateral boundary for domain 1: 0.00547 elapsed seconds
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE 1 IS 1 IE 100 JS 1 JE 57
WRF NUMBER OF TILES = 1
Timing for main: time 2016-04-01_00:03:00 on domain 1: 1.36767 elapsed seconds
Program received signal SIGFPE: Floating-point exception - erroneous arithmetic operation.
Backtrace for this error:
#0 0x7F442A45FE08
#1 0x7F442A45EF90
#2 0x7F4429B914AF
#3 0x1E38C2A in __module_radiation_driver_MOD_radiation_driver
#4 0x22B0786 in __module_first_rk_step_part1_MOD_first_rk_step_part1
#5 0x1A391FC in solve_em_
#6 0x18C52AC in solve_interface_
#7 0x47C212 in __module_integrate_MOD_integrate
#8 0x406E03 in __module_wrf_top_MOD_wrf_run
浮点数例外 (核心已转储)
第二部分-namelist.input：
&time_control
run_days = 0,
run_hours = 696,
run_minutes = 0,
run_seconds = 0,
start_year = 2016, 2005, 2000,
start_month = 04, 08, 01,
start_day = 01, 28, 24,
start_hour = 00, 00, 12,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2016, 2005, 2000,
end_month = 04, 08, 01,
end_day = 30, 29, 25,
end_hour = 00, 00, 12,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.false.,.false.,
fine_input_stream = 0,0,0,
history_interval = 180, 60, 60,
frames_per_outfile = 1000, 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 180,
time_step_fract_num = 0,
time_step_fract_den = 0,
max_dom = 1,
s_we = 1, 1, 1,
e_we = 100, 118, 94,
s_sn = 1, 1, 1,
e_sn = 57, 103, 91,
s_vert = 1, 1, 1,
e_vert = 30, 30, 30,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
p_top_requested = 5000,
dx = 30000, 10000, 3333.33,
dy = 30000, 10000, 3333.33,
grid_id = 1, 2, 3,
parent_id = 1, 1, 2,
i_parent_start = 1, 31, 30,
j_parent_start = 1, 17, 30,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 0
/
&physics
sst_update = 0,
mp_physics = 3, 3, 3,
ra_lw_physics = 1, 1, 1,
ra_sw_physics = 1, 1, 1,
radt = 30, 30, 30,
sf_sfclay_physics = 1, 1, 1,
sf_surface_physics = 1, 1, 1,
bl_pbl_physics = 1, 1, 1,
bldt = 0, 0, 0,
cu_physics = 1, 1, 0,
cudt = 5, 5, 5,
num_soil_layers = 4,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
sf_urban_physics = 0, 0, 0,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1, 1, 1,
km_opt = 4, 4, 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups =1
/
第三部分-namelist.wps：
&share
wrf_core = 'ARW',
max_dom = 1,
start_date = '2016-04-01_00:00:00','2005-08-28_00:00:00',
end_date = '2016-04-30_00:00:00','2005-08-28_00:00:00',
interval_seconds = 21600
io_form_geogrid = 2,
/
&geogrid
parent_id = 1, 1,
parent_grid_ratio = 1, 3,
i_parent_start = 1, 35,
j_parent_start = 1, 23,
e_we = 100, 118,
e_sn = 57, 103,
geog_data_res = '10m',2m',
dx = 30000,
dy = 30000,
map_proj = 'mercator',
ref_lat = 44.138,
ref_lon = 99.794,
truelat1 = 44.138,
truelat2 = 0.0,
stand_lon = 99.794,
geog_data_path = '/home/ywu/geog'
/
&ungrib
out_format = 'WPS',
prefix = 'FILE',
/
&metgrid
fg_name = 'FILE'
io_form_metgrid = 2,
/
|
|
窥视卡
雷达卡
发表于 2017-4-16 14:34:23
显身卡
