查看: 6665|回复: 0

WRF新手，运行real.exe没有出现wrfinput等文件

发表于 2020-11-23 17:10:13 | 显示全部楼层 |阅读模式

数值模式
使用语言:	中文
我看过提问的智慧:	看过
自己思考时长(天):	7
问题概况:	nameilist.wps如下 &share wrf_core = 'ARW', max_dom = 2, start_date = '2015-12-01_00:00:00','2015-12-01_00:00:00','2015-11-25_00:00:00' end_date = '2015-12-31_00:00:00','2015-12-31_00:00:00','2015-12-02_00:00:00' interval_seconds = 21600 io_form_geogrid = 2, / &geogrid parent_id = 0, 1, parent_grid_ratio = 1, 3, i_parent_start = 1, 58, j_parent_start = 1, 32, e_we = 102, 58, e_sn = 72, 58, geog_data_res = 'default','default', dx = 27000, dy = 27000, map_proj = 'lambert', ref_lat = 40, ref_lon = 105, truelat1 = 30.0, truelat2 = 60.0, stand_lon = 105.0, geog_data_path = '/home/WPS_GEOG/' / geog_data_res = 'modis_lakes+2m','modis_lakes+2m','modis_lakes+2m' &ungrib out_format = 'WPS', prefix = 'FILE', / &metgrid fg_name = 'FILE' io_form_metgrid = 2, / namelist.input如下： &time_control start_year = 2015, 2015, start_month = 12, 12, start_day = 01, 01, start_hour = 00, 00, start_minute = 00, 00, start_second = 00, 00, end_year = 2015, 2015, end_month = 12, 12, end_day = 31, 31, end_hour = 00, 00, end_minute = 00, 00, end_second = 00, 00, interval_seconds = 21600 input_from_file = .true.,.true.,.true., history_interval = 60, 60, 60, frames_per_outfile = 9999, 9999, 1000, restart = .false., restart_interval_h = 6 io_form_history = 2 io_form_restart = 2 io_form_input = 2 io_form_boundary = 2 debug_level = 300 auxinput4_interval = 360, 360 , io_form_auxinput4 = 2 auxinput4_inname = 'wrflowinp_d<domain>', write_hist_at_0h_rst = .false. auxinput8_inname = 'wrf_gocart_backg' io_form_auxinput8 = 0, auxinput5_inname = 'wrfchemi_<hr>z_d<domain>', auxinput5_interval_m = 720, 720, io_form_auxinput5 = 2, frames_per_auxinput5 = 1, 1, / &domains time_step = 150 time_step_fract_num = 0, time_step_fract_den = 1, max_dom = 2 e_we = 102, 58, e_sn = 72, 58, e_vert = 31, 31, p_top_requested = 10000, num_metgrid_levels = 27, num_metgrid_soil_levels = 4, dx = 27000, 9000, dy = 27000, 9000, grid_id = 1, 2, parent_id = 0, 1, i_parent_start = 1, 58, j_parent_start = 1, 32, parent_grid_ratio = 1, 3, parent_time_step_ratio = 1, 3, feedback = 1, smooth_option = 0 interp_type = 1 lowest_lev_from_sfc = .false. lagrange_order = 1 force_sfc_in_vinterp = 1 zap_close_levels = 500 sfcp_to_sfcp = .false. adjust_heights = .false. / &physics sst_update = 0 mp_physics = 2, 2, 3, ra_lw_physics = 1, 1, 3, ra_sw_physics = 1, 1, 3, radt = 30, 30, 30, sf_sfclay_physics = 1, 1, 1, sf_surface_physics = 2, 2, 2, bl_pbl_physics = 1, 1, 1, bldt = 0, 0, 0, cu_physics = 1, 1, 0, cu_diag = 1, 2, 0, cudt = 5, 5, 5, isfflx = 1, ifsnow = 0, icloud = 1, surface_input_source = 4, num_soil_layers = 4, num_land_cat = 20, surface_input_source = 1, sf_urban_physics = 0, 0, 1, tmn_update = 1, sst_skin = 1, progn = 1, mp_zero_out = 0, maxiens = 1, maxens = 3, maxens2 = 3, maxens3 = 16, ensdim = 144, / &fdda grid_fdda = 1, 1, 0, gfdda_inname = "wrffdda_d<domain>", gfdda_end_h = 9999, 9999, 2000, gfdda_interval_m = 360, 360, 360, fgdt = 0, 0, 0, if_no_pbl_nudging_uv = 0, 0, 0, if_no_pbl_nudging_t = 1, 1, 1, if_no_pbl_nudging_q = 1, 1, 1, if_zfac_uv = 0, 0, 0, k_zfac_uv = 10, 10, 10, if_zfac_t = 0, 0, 0, k_zfac_t = 10, 10, 10, if_zfac_q = 0, 0, 0, k_zfac_q = 10, 10, 10, guv = 0.0003, 0.0003, 0.0003, gt = 0.0003, 0.0003, 0.0003, gq = 0.0003, 0.0003, 0.0003, if_ramping = 1, dtramp_min = 60.0, io_form_gfdda = 2, / &dynamics w_damping = 0, diff_opt = 1, km_opt = 4, diff_6th_opt = 0, 0, 0, diff_6th_factor = 0.12, 0.12, 0.12, base_temp = 290. damp_opt = 0, zdamp = 5000., 5000., 5000., dampcoef = 0.2, 0.2, 0.2 khdif = 0, 0, 0, kvdif = 0, 0, 0, non_hydrostatic = .true., .true., .true., h_mom_adv_order = 5, 5, 5, v_mom_adv_order = 3, 3, 3, h_sca_adv_order = 5, 5, 5, v_sca_adv_order = 3, 3, 3, moist_adv_opt = 1, 1, 1, scalar_adv_opt = 1, 1, 1, chem_adv_opt = 2, 2, 2, / &bdy_control spec_bdy_width = 5, spec_zone = 1, relax_zone = 4, spec_exp = 0.33, specified = .true., .false.,.false., nested = .false., .true., .true., / &scm / &noah_mp / &fire / &dfi_control / &tc / &diags / &logging / &grib2 / &namelist_quilt nio_tasks_per_group = 0, nio_groups = 1, /
问题截图:
系统平台:	数值模拟