regcm4.5安装求助

jyt · 发表于 2016-5-18 12:51:54

登录后查看更多精彩内容~

您需要登录才可以下载或查看，没有帐号？立即注册

x

本帖最后由 jyt 于 2016-5-18 12:55 编辑

regcm现在更新到4.5了，不知道有没有人安装运行成功，我在运行时提示
  [yuequn@login Testing]$ ./bin/terrain test_001.in

  This is Terrain part of RegCM package version 4
SVN Revision: 4.5.0 compiled at: data : May 17 2016  time: 22:29:26

: this run start at  : 2016-05-18 13:57:31+0800
: it is submitted by : yuequn
: it is running on : login
: in directory    : /home/users/yuequn/jyt/regcm/Testing

Vertical Grid Description

-----------------------------------------
k       sigma    p(mb)          z(m)
-----------------------------------------
19    1.000    1013.25       0.00
18    0.990    1003.62       80.95
17    0.980    993.99       162.69
16    0.960    974.72       329.40
15    0.930    945.82       587.10
14    0.890    907.29       945.29
13    0.840    859.13    1418.14
12    0.780    801.34    2026.47
11    0.710    733.91    2801.40
10    0.630    656.85    3790.93
  9    0.550    579.79    4911.99
  8    0.470    502.73    6204.88
  7    0.390    425.67    7731.83
  6    0.310    348.61    9596.31
  5    0.230    271.55    11989.90
  4    0.160    204.12    14776.13
  3    0.100    146.32    18107.61
  2    0.050    98.16    22245.98
  1    0.000    50.00    30370.64

Doing Horizontal Grid with following parameters
iy    =       110
jx    =       128
ds    = 60.0000000000000
clat = 35.0000000000000
clon = 105.000000000000
iproj  = LAMCON
Grid setup done
Geo mapping done
Calculated large extrema:
      MINLAT = 1.00000000000000
      MAXLAT = 64.0000000000000
      MINLON = 46.0000000000000
      MAXLON = 165.000000000000
Determined Grid coordinate range
Using resampling at          15  minutes.
Opening /home/users/yuequn/data/SURFACE/GMTED_DEM_30s.nc
No such file or directory

mod_rdldtr.F90 :    141:NetCDF Error:          2
abort: Fortran Abort Called
[yuequn@login Testing]$
不知道是regcm4.5没有安装成功，还是编译器问题，或者是因为没有这个文件GMTED_DEM_30s.nc才不行
求大神赐教！不胜感激！

letsdo8 · 发表于 2016-5-18 14:26:22

你应该下载GMTED_DEM_30s.nc数据，从ICTP RegCM4数据网上。

letsdo8 · 发表于 2016-5-19 08:24:07

http://bbs.06climate.com/forum.p ... &extra=page%3D1
可能是这个原因。
新版本中对NetCDF版本要求提高了。

jyt · 发表于 2016-5-19 13:22:15

letsdo8 发表于 2016-5-18 14:26
你应该下载GMTED_DEM_30s.nc数据，从ICTP RegCM4数据网上。

我确实是没有GMTED_DEM_30s.nc数据，ICTP RegCM4数据网上没有找到GMTED_DEM_30s.nc，全都是GTOPO的数据，不知道你有没有下载GMTED_DEM_30s.nc数据的链接，非常感谢你的回复！

letsdo8 · 发表于 2016-5-20 07:28:32

jyt 发表于 2016-5-19 13:22
我确实是没有GMTED_DEM_30s.nc数据，ICTP RegCM4数据网上没有找到GMTED_DEM_30s.nc，全都是GTOPO的数据， ...

估计应该用的和WRF WPS 的数据一样，
http://www2.mmm.ucar.edu/wrf/src ... ted2010_30s.tar.bz2
解压后应该有。

或者需要再NetCDF3/4格式转换一下

letsdo8 · 发表于 2016-5-20 07:28:43

本帖最后由 letsdo8 于 2016-5-20 09:02 编辑

jyt 发表于 2016-5-19 13:22
我确实是没有GMTED_DEM_30s.nc数据，ICTP RegCM4数据网上没有找到GMTED_DEM_30s.nc，全都是GTOPO的数据， ...

被你绕进去了，原以为你知道怎么下RegCM4数据呢？看来是菜鸟:)

http://clima-dods.ictp.it/Data/RegCM_Data/SURFACE/

jyt · 发表于 2016-5-22 22:02:59

letsdo8 发表于 2016-5-20 07:28
被你绕进去了，原以为你知道怎么下RegCM4数据呢？看来是菜鸟:)

http://clima-dods.ictp.it/Data/RegCM ...

[yuequn@login SURFACE]$ ls
ETOPO_BTM_30s.nc GLCC_BATS_30s.nc  GMTED_DEM_30s.nc.md5
GLCC10MIN_BATS.CDF  GMTED_DEM_30s.nc  GTOPO_DEM_30S.nc

我下好GMTED_DEM_30s.nc放目录下，再运行提示以下

[yuequn@login Testing]$ ./bin/terrain test_001.in

  This is Terrain part of RegCM package version 4
SVN Revision: 4.5.0 compiled at: data : May 17 2016  time: 22:29:26

: this run start at  : 2016-05-22 23:07:13+0800
: it is submitted by : yuequn
: it is running on : login
: in directory    : /home/users/yuequn/jyt/regcm/Testing

Vertical Grid Description

-----------------------------------------
k       sigma    p(mb)          z(m)
-----------------------------------------
19    1.000    1013.25       0.00
18    0.990    1003.62       80.95
17    0.980    993.99       162.69
16    0.960    974.72       329.40
15    0.930    945.82       587.10
14    0.890    907.29       945.29
13    0.840    859.13    1418.14
12    0.780    801.34    2026.47
11    0.710    733.91    2801.40
10    0.630    656.85    3790.93
  9    0.550    579.79    4911.99
  8    0.470    502.73    6204.88
  7    0.390    425.67    7731.83
  6    0.310    348.61    9596.31
  5    0.230    271.55    11989.90
  4    0.160    204.12    14776.13
  3    0.100    146.32    18107.61
  2    0.050    98.16    22245.98
  1    0.000    50.00    30370.64

Doing Horizontal Grid with following parameters
iy    =       110
jx    =       128
ds    = 60.0000000000000
clat = 35.0000000000000
clon = 105.000000000000
iproj  = LAMCON
Grid setup done
Geo mapping done
Calculated large extrema:
      MINLAT = 1.00000000000000
      MAXLAT = 64.0000000000000
      MINLON = 46.0000000000000
      MAXLON = 165.000000000000
Determined Grid coordinate range
Using resampling at          15  minutes.
Opening /home/users/yuequn/data/SURFACE/GMTED_DEM_30s.nc
NetCDF: Unknown file format

mod_rdldtr.F90 :    141:NetCDF Error:       -51
abort: Fortran Abort Called

应该是netcdf的问题了是吗？求大神解疑了

jyt · 发表于 2016-5-22 22:56:49

letsdo8 发表于 2016-5-20 07:28
被你绕进去了，原以为你知道怎么下RegCM4数据呢？看来是菜鸟:)

http://clima-dods.ictp.it/Data/RegCM ...

[yuequn@login SURFACE]$ ls
ETOPO_BTM_30s.nc GLCC_BATS_30s.nc GMTED_DEM_30s.nc.md5
GLCC10MIN_BATS.CDF GMTED_DEM_30s.nc GTOPO_DEM_30s.nc

新下载的数据GMTED_DEM_30s.nc识别不了

[yuequn@login SURFACE]$ ncdump -h GMTED_DEM_30s.nc
ncdump: GMTED_DEM_30s.nc: NetCDF: Unknown file format

以前师姐用过的数据可以识别的

[yuequn@login SURFACE]$ ncdump -h GTOPO_DEM_30s.nc
netcdf GTOPO_DEM_30s {
dimensions:
lon = 43200 ;
lat = 21600 ;
variables:
double lon(lon) ;
lon:standard_name = "longitude" ;
lon:long_name = "longitude" ;
lon:units = "degrees_east" ;
lon:actual_range = -179.995833333333, 179.995833333333 ;
double lat(lat) ;
lat:standard_name = "latitude" ;
lat:long_name = "latitude" ;
lat:units = "degrees_north" ;
lat:actual_range = -89.9958333333333, 89.9958333333333 ;
short z(lat, lon) ;
z:standard_name = "height" ;
z:long_name = "Digital terrain model elevation" ;
z:units = "m" ;

// global attributes:
:Conventions = "COARDS/CF-1.0" ;
:title = "Gtopo30 Digital Elevation Model" ;
:history = "2010-10-04 12:30:00 UTC: gtopo302nc" ;
:reference = "http://eros.usgs.gov/#/Find_Data/Products_and_Data_Available/gtopo30_info" ;
}
[yuequn@login SURFACE]$

jyt · 发表于 2016-5-23 10:46:30

letsdo8 发表于 2016-5-20 07:28
被你绕进去了，原以为你知道怎么下RegCM4数据呢？看来是菜鸟:)

http://clima-dods.ictp.it/Data/RegCM ...

大神求助
[yuequn@login SURFACE]$ file GMTED_DEM_30s.nc
GMTED_DEM_30s.nc: Hierarchical Data Format (version 5) data
[yuequn@login SURFACE]$ file GTOPO_DEM_30s.nc
GTOPO_DEM_30s.nc: NetCDF Data Format data

letsdo8 · 发表于 2016-5-23 12:03:19

jyt 发表于 2016-5-23 10:46
大神求助
[yuequn@login SURFACE]$ file GMTED_DEM_30s.nc
GMTED_DEM_30s.nc: Hierarchical Data Forma ...

两种可能：
1是文件没下全
   SURFACE的六个文件大小应该是：
215765187 Dec  4  2014 ESACCI-SOILMOISTURE.nc
518792889 Dec  4  2014 ETOPO_BTM_30s.nc
  22109772 Dec  4  2014 GLCC_BATS_30s.nc
3356371 Dec  4  2014 GLZB_SOIL_30s.nc
245927929 Jun 10  2015 GMTED_DEM_30s.nc
233298462 Dec  4  2014 GTOPO_DEM_30s.nc

2.NetCDF的版本不支持压缩格式
看我打ncdump -h GMTED_DEM_30s.nc后的信息：
netcdf GMTED_DEM_30s {
dimensions:
      lon = 43200 ;
      lat = 21600 ;
variables:
      char crs ;
            crs:grid_mapping_name = "latitude_longitude" ;
            crs:longitude_of_prime_meridian = 0. ;
            crs:semi_major_axis = 6378137. ;
            crs:inverse_flattening = 298.257223563 ;
            crs:spatial_ref = "GEOGCS[\"WGS 84\",DATUM[\"WGS_1984\",SPHEROID[\"WGS 84\",6378137,298.257223563,AUTHORITY[\"EPSG\",\"7030\"]],AUTHORITY[\"EPSG\",\"6326\"]],PRIMEM[\"Greenwich\",0],UNIT[\"degree\",0.0174532925199433],AUTHORITY[\"EPSG\",\"4326\"]]" ;
            crs:GeoTransform = "-180.0001388888889 0.
......

		自动登录	找回密码
密码			立即注册