real.exe运行出现问题

870744170

echozf90 发表于 2015-5-29 15:57
你好，我可能之前链接天气数据那一步写的不太对，后来改正之后ungrib.exe和metgrid.exe成功运行，但是rea ...

错误提示已经很清楚了，SIZE MISMATCH:  namelist ide,jde,num_metgrid_levels=         160         110          27 ; input data ide,jde,num_metgrid_levels=         160         110          48，这个三个变量不一致，你要把num_metgrid_levels改为48

echozf90

870744170 发表于 2015-5-30 09:38
错误提示已经很清楚了，SIZE MISMATCH:  namelist ide,jde,num_metgrid_levels=         160         110 ...

亲，我改成48了，但还是有错误啊，出现了更多的提示，看不懂要疯了。呜呜~
Error reading namelist &logging from namelist.input.  Using default logging config.
Error reading namelist &logging from namelist.input.  Using default logging config.
Namelist dfi_control not found in namelist.input. Using registry defaults for variables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables in scm
Namelist fire not found in namelist.input. Using registry defaults for variables in fire
Namelist diags not found in namelist.input. Using registry defaults for variables in diags
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      3, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      3, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      3, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to      4
REAL_EM V3.4.1 PREPROCESSOR
  *************************************
  Parent domain
  ids,ide,jds,jde            1         160           1         110
  ims,ime,jms,jme           -4         165          -4         115
  ips,ipe,jps,jpe            1         160           1         110
  *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
    alloc_space_field: domain            1 ,             440232912  bytes allocated
Time period #   1 to process = 2015-05-26_00:00:00.
Time period #   2 to process = 2015-05-26_03:00:00.
Time period #   3 to process = 2015-05-26_06:00:00.
Time period #   4 to process = 2015-05-26_09:00:00.
Time period #   5 to process = 2015-05-26_12:00:00.
Time period #   6 to process = 2015-05-26_15:00:00.
Time period #   7 to process = 2015-05-26_18:00:00.
Time period #   8 to process = 2015-05-26_21:00:00.
Time period #   9 to process = 2015-05-27_00:00:00.
Time period #  10 to process = 2015-05-27_03:00:00.
Time period #  11 to process = 2015-05-27_06:00:00.
Time period #  12 to process = 2015-05-27_09:00:00.
Time period #  13 to process = 2015-05-27_12:00:00.
Time period #  14 to process = 2015-05-27_15:00:00.
Time period #  15 to process = 2015-05-27_18:00:00.
Time period #  16 to process = 2015-05-27_21:00:00.
Time period #  17 to process = 2015-05-28_00:00:00.
Time period #  18 to process = 2015-05-28_03:00:00.
Time period #  19 to process = 2015-05-28_06:00:00.
Time period #  20 to process = 2015-05-28_09:00:00.
Time period #  21 to process = 2015-05-28_12:00:00.
Time period #  22 to process = 2015-05-28_15:00:00.
Time period #  23 to process = 2015-05-28_18:00:00.
Time period #  24 to process = 2015-05-28_21:00:00.
Time period #  25 to process = 2015-05-29_00:00:00.
Time period #  26 to process = 2015-05-29_03:00:00.
Time period #  27 to process = 2015-05-29_06:00:00.
Time period #  28 to process = 2015-05-29_09:00:00.
Time period #  29 to process = 2015-05-29_12:00:00.
Time period #  30 to process = 2015-05-29_15:00:00.
Time period #  31 to process = 2015-05-29_18:00:00.
Time period #  32 to process = 2015-05-29_21:00:00.
Time period #  33 to process = 2015-05-30_00:00:00.
Time period #  34 to process = 2015-05-30_03:00:00.
Time period #  35 to process = 2015-05-30_06:00:00.
Time period #  36 to process = 2015-05-30_09:00:00.
Time period #  37 to process = 2015-05-30_12:00:00.
Time period #  38 to process = 2015-05-30_15:00:00.
Time period #  39 to process = 2015-05-30_18:00:00.
Time period #  40 to process = 2015-05-30_21:00:00.
Time period #  41 to process = 2015-05-31_00:00:00.
Time period #  42 to process = 2015-05-31_03:00:00.
Time period #  43 to process = 2015-05-31_06:00:00.
Time period #  44 to process = 2015-05-31_09:00:00.
Time period #  45 to process = 2015-05-31_12:00:00.
Time period #  46 to process = 2015-05-31_15:00:00.
Time period #  47 to process = 2015-05-31_18:00:00.
Time period #  48 to process = 2015-05-31_21:00:00.
Total analysis times to input =   48.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_00:00:00.0000, which is loop #   1 out of   48
configflags%julyr, %julday, %gmt:        2015         146   0.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_00:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_00:00:00 Timing for input          0 s.
d01 2015-05-26_00:00:00          flag_soil_layers read from met_em file is  1
Max map factor in domain 1 =  1.15. Scale the dt in the model accordingly.
Using sfcprs3 to compute psfc
Converged znw(kte) should be about 0.0 =  -2.99999883E-08
d01 2015-05-26_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_00:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_00:00:00 Timing for processing          2 s.
d01 2015-05-26_00:00:00 Timing for output          1 s.
d01 2015-05-26_00:00:00 Timing for loop #    1 =          3 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_03:00:00.0000, which is loop #   2 out of   48
configflags%julyr, %julday, %gmt:        2015         146   3.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_03:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_03:00:00 Timing for input          0 s.
d01 2015-05-26_03:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_03:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_03:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_03:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_00:00:00.0000 2015-05-26_03:00:00     
d01 2015-05-26_03:00:00 Timing for output          0 s.
d01 2015-05-26_03:00:00 Timing for loop #    2 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_06:00:00.0000, which is loop #   3 out of   48
configflags%julyr, %julday, %gmt:        2015         146   6.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_06:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_06:00:00 Timing for input          0 s.
d01 2015-05-26_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_06:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_06:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_03:00:00.0000 2015-05-26_06:00:00     
d01 2015-05-26_06:00:00 Timing for output          0 s.
d01 2015-05-26_06:00:00 Timing for loop #    3 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_09:00:00.0000, which is loop #   4 out of   48
configflags%julyr, %julday, %gmt:        2015         146   9.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_09:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_09:00:00 Timing for input          0 s.
d01 2015-05-26_09:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_09:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_09:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_09:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_06:00:00.0000 2015-05-26_09:00:00     
d01 2015-05-26_09:00:00 Timing for output          0 s.
d01 2015-05-26_09:00:00 Timing for loop #    4 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_12:00:00.0000, which is loop #   5 out of   48
configflags%julyr, %julday, %gmt:        2015         146   12.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_12:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_12:00:00 Timing for input          0 s.
d01 2015-05-26_12:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_12:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_12:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_09:00:00.0000 2015-05-26_12:00:00     
d01 2015-05-26_12:00:00 Timing for output          0 s.
d01 2015-05-26_12:00:00 Timing for loop #    5 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_15:00:00.0000, which is loop #   6 out of   48
configflags%julyr, %julday, %gmt:        2015         146   15.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_15:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_15:00:00 Timing for input          0 s.
d01 2015-05-26_15:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_15:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_15:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_15:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_12:00:00.0000 2015-05-26_15:00:00     
d01 2015-05-26_15:00:00 Timing for output          0 s.
d01 2015-05-26_15:00:00 Timing for loop #    6 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_18:00:00.0000, which is loop #   7 out of   48
configflags%julyr, %julday, %gmt:        2015         146   18.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_18:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_18:00:00 Timing for input          0 s.
d01 2015-05-26_18:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_18:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_18:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_15:00:00.0000 2015-05-26_18:00:00     
d01 2015-05-26_18:00:00 Timing for output          0 s.
d01 2015-05-26_18:00:00 Timing for loop #    7 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_21:00:00.0000, which is loop #   8 out of   48
configflags%julyr, %julday, %gmt:        2015         146   21.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_21:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_21:00:00 Timing for input          0 s.
d01 2015-05-26_21:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_21:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_21:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_21:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_18:00:00.0000 2015-05-26_21:00:00     
d01 2015-05-26_21:00:00 Timing for output          0 s.
d01 2015-05-26_21:00:00 Timing for loop #    8 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-27_00:00:00.0000, which is loop #   9 out of   48
configflags%julyr, %julday, %gmt:        2015         147   0.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-27_00:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-27_00:00:00 Timing for input          0 s.
d01 2015-05-27_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-27_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-27_00:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-27_00:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_21:00:00.0000 2015-05-27_00:00:00     
d01 2015-05-27_00:00:00 Timing for output          0 s.
d01 2015-05-27_00:00:00 Timing for loop #    9 =          1 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-27_03:00:00.0000, which is loop #  10 out of   48
configflags%julyr, %julday, %gmt:        2015         147   3.0000000   
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:     404
error opening met_em.d01.2015-05-27_03:00:00.nc for input; bad date in namelist or file not in directory
-------------------------------------------
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:     404
error opening met_em.d01.2015-05-27_03:00:00.nc for input; bad date in namelist or file not in directory

870744170

echozf90 发表于 2015-6-1 10:08
亲，我改成48了，但还是有错误啊，出现了更多的提示，看不懂要疯了。呜呜~
Error reading namelist &log ...

你的run_hours和end_day都有问题，run_hours=48，end_day=28

echozf90

870744170 发表于 2015-6-1 10:57
你的run_hours和end_day都有问题，run_hours=48，end_day=28

修改成run_hours=48，end_day=28之后也不对啊，这个run_hours和end_day不是自己可以设定的吗？

870744170

echozf90 发表于 2015-6-1 11:15
修改成run_hours=48，end_day=28之后也不对啊，这个run_hours和end_day不是自己可以设定的吗？

对啊，就是自己设定，但是程序会按照你的start_day和end_day计算你的run_hours，你的run_hours必须和这个start_day和end_day匹配。如果你是高版本的WRF的话，run_hours,run_days,run_minutes这些都可以不写

echozf90

870744170 发表于 2015-6-1 15:15
对啊，就是自己设定，但是程序会按照你的start_day和end_day计算你的run_hours，你的run_hours必须和这个 ...

我开始设置的是：run_hours=24，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month=05 end_day=27;num_metgrid_levels=48运行时候出现错误，后来把设置修改成了run_hours=48，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month=05 end_day=28;num_metgrid_levels=48还是出错了啊

870744170

echozf90 发表于 2015-6-1 15:49
我开始设置的是：run_hours=24，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month= ...

报的什么错？看看你的met_em这个文件是不是全的？这个要求从2015年5月26日~2015年5月28日的都有

echozf90

870744170 发表于 2015-6-1 15:51
报的什么错？看看你的met_em这个文件是不是全的？这个要求从2015年5月26日~2015年5月28日的都有

为什么一开始的run_hours=24，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month=05 end_day=27;num_metgrid_levels=48运行时候会出现错误？后来把设置修改成了run_hours=48，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month=05 end_day=28;num_metgrid_levels=48出错可能是因为前面的metgrid.exe运行的时候时间内我没改，只生成26~27日的met文件

870744170

echozf90 发表于 2015-6-1 15:56
为什么一开始的run_hours=24，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month=05 ...

你一开始的时候把end_day设置成了48！

echozf90

870744170 发表于 2015-6-1 15:51
报的什么错？看看你的met_em这个文件是不是全的？这个要求从2015年5月26日~2015年5月28日的都有

run_hours=24，start_year=2015,start_month=05,start_day=26;end_year=2015,end_month=05 end_day=27;num_metgrid_levels=48运行时候出现错误提示：

Error reading namelist &logging from namelist.input.  Using default logging config.
Error reading namelist &logging from namelist.input.  Using default logging config.
Namelist dfi_control not found in namelist.input. Using registry defaults for variables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables in scm
Namelist fire not found in namelist.input. Using registry defaults for variables in fire
Namelist diags not found in namelist.input. Using registry defaults for variables in diags
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      3, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      3, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      3, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to      4
REAL_EM V3.4.1 PREPROCESSOR
  *************************************
  Parent domain
  ids,ide,jds,jde            1         160           1         110
  ims,ime,jms,jme           -4         165          -4         115
  ips,ipe,jps,jpe            1         160           1         110
  *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
    alloc_space_field: domain            1 ,             440232912  bytes allocated
Time period #   1 to process = 2015-05-26_00:00:00.
Time period #   2 to process = 2015-05-26_03:00:00.
Time period #   3 to process = 2015-05-26_06:00:00.
Time period #   4 to process = 2015-05-26_09:00:00.
Time period #   5 to process = 2015-05-26_12:00:00.
Time period #   6 to process = 2015-05-26_15:00:00.
Time period #   7 to process = 2015-05-26_18:00:00.
Time period #   8 to process = 2015-05-26_21:00:00.
Time period #   9 to process = 2015-05-27_00:00:00.
Total analysis times to input =    9.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_00:00:00.0000, which is loop #   1 out of    9
configflags%julyr, %julday, %gmt:        2015         146   0.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_00:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_00:00:00 Timing for input          2 s.
d01 2015-05-26_00:00:00          flag_soil_layers read from met_em file is  1
Max map factor in domain 1 =  1.15. Scale the dt in the model accordingly.
Using sfcprs3 to compute psfc
Converged znw(kte) should be about 0.0 =  -2.99999883E-08
d01 2015-05-26_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_00:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_00:00:00 Timing for processing          3 s.
d01 2015-05-26_00:00:00 Timing for output          3 s.
d01 2015-05-26_00:00:00 Timing for loop #    1 =          8 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_03:00:00.0000, which is loop #   2 out of    9
configflags%julyr, %julday, %gmt:        2015         146   3.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_03:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_03:00:00 Timing for input          2 s.
d01 2015-05-26_03:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_03:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_03:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_03:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_00:00:00.0000 2015-05-26_03:00:00     
d01 2015-05-26_03:00:00 Timing for output          2 s.
d01 2015-05-26_03:00:00 Timing for loop #    2 =          5 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_06:00:00.0000, which is loop #   3 out of    9
configflags%julyr, %julday, %gmt:        2015         146   6.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_06:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_06:00:00 Timing for input          2 s.
d01 2015-05-26_06:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_06:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_06:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_03:00:00.0000 2015-05-26_06:00:00     
d01 2015-05-26_06:00:00 Timing for output          0 s.
d01 2015-05-26_06:00:00 Timing for loop #    3 =          3 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_09:00:00.0000, which is loop #   4 out of    9
configflags%julyr, %julday, %gmt:        2015         146   9.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_09:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_09:00:00 Timing for input          1 s.
d01 2015-05-26_09:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_09:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_09:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_09:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_06:00:00.0000 2015-05-26_09:00:00     
d01 2015-05-26_09:00:00 Timing for output          0 s.
d01 2015-05-26_09:00:00 Timing for loop #    4 =          2 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_12:00:00.0000, which is loop #   5 out of    9
configflags%julyr, %julday, %gmt:        2015         146   12.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_12:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_12:00:00 Timing for input          1 s.
d01 2015-05-26_12:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_12:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_12:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_09:00:00.0000 2015-05-26_12:00:00     
d01 2015-05-26_12:00:00 Timing for output          0 s.
d01 2015-05-26_12:00:00 Timing for loop #    5 =          3 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_15:00:00.0000, which is loop #   6 out of    9
configflags%julyr, %julday, %gmt:        2015         146   15.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_15:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_15:00:00 Timing for input          2 s.
d01 2015-05-26_15:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_15:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_15:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_15:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_12:00:00.0000 2015-05-26_15:00:00     
d01 2015-05-26_15:00:00 Timing for output          0 s.
d01 2015-05-26_15:00:00 Timing for loop #    6 =          3 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_18:00:00.0000, which is loop #   7 out of    9
configflags%julyr, %julday, %gmt:        2015         146   18.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_18:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_18:00:00 Timing for input          1 s.
d01 2015-05-26_18:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_18:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_18:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_15:00:00.0000 2015-05-26_18:00:00     
d01 2015-05-26_18:00:00 Timing for output          0 s.
d01 2015-05-26_18:00:00 Timing for loop #    7 =          2 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-26_21:00:00.0000, which is loop #   8 out of    9
configflags%julyr, %julday, %gmt:        2015         146   21.000000   
  metgrid input_wrf.F first_date_input = 2015-05-26_21:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-26_21:00:00 Timing for input          1 s.
d01 2015-05-26_21:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-26_21:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-26_21:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-26_21:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_18:00:00.0000 2015-05-26_21:00:00     
d01 2015-05-26_21:00:00 Timing for output          0 s.
d01 2015-05-26_21:00:00 Timing for loop #    8 =          2 s.
  
-----------------------------------------------------------------------------
  
Domain  1: Current date being processed: 2015-05-27_00:00:00.0000, which is loop #   9 out of    9
configflags%julyr, %julday, %gmt:        2015         147   0.0000000   
  metgrid input_wrf.F first_date_input = 2015-05-27_00:00:00
  metgrid input_wrf.F first_date_nml = 2015-05-26_00:00:00
d01 2015-05-27_00:00:00 Timing for input          1 s.
d01 2015-05-27_00:00:00          flag_soil_layers read from met_em file is  1
Using sfcprs3 to compute psfc
d01 2015-05-27_00:00:00 Old data, no inland lake information
  Assume Noah LSM input
LAND  CHANGE =            0
WATER CHANGE =            0
d01 2015-05-27_00:00:00 Total post number of sea ice location changes (water to land) =     13
d01 2015-05-27_00:00:00 Timing for processing          1 s.
LBC valid between these times 2015-05-26_21:00:00.0000 2015-05-27_00:00:00     
d01 2015-05-27_00:00:00 Timing for output          1 s.
d01 2015-05-27_00:00:00 Timing for loop #    9 =          3 s.
  *************************************
  Nesting domain
  ids,ide,jds,jde            1          58           1          40
  ims,ime,jms,jme           -4          63          -4          45
  ips,ipe,jps,jpe            1          58           1          40
  INTERMEDIATE domain
  ids,ide,jds,jde           95         119          50          68
  ims,ime,jms,jme           90         124          45          73
  ips,ipe,jps,jpe           93         121          48          70
  *************************************
d01 2015-05-27_00:00:00  alloc_space_field: domain            2 ,              74885072  bytes allocated
Time period #   1 to process = 2015-05-26_00:00:00.
Time period #   2 to process = 2015-05-26_03:00:00.
Time period #   3 to process = 2015-05-26_06:00:00.
Time period #   4 to process = 2015-05-26_09:00:00.
Time period #   5 to process = 2015-05-26_12:00:00.
Time period #   6 to process = 2015-05-26_15:00:00.
Time period #   7 to process = 2015-05-26_18:00:00.
Time period #   8 to process = 2015-05-26_21:00:00.
Time period #   9 to process = 2015-05-27_00:00:00.
Total analysis times to input =    9.
  
-----------------------------------------------------------------------------
  
Domain  2: Current date being processed: 2015-05-26_00:00:00.0000, which is loop #   1 out of    9
configflags%julyr, %julday, %gmt:        2015         146   0.0000000   
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:     404
error opening met_em.d02.2015-05-26_00:00:00.nc for input; bad date in namelist or file not in directory
-------------------------------------------
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:     404
error opening met_em.d02.2015-05-26_00:00:00.nc for input; bad date in namelist or file not in directory