CMAQ v5.0.2安装教程on Ubuntu 15.04 with GCC

dolphinmaz

感谢分享 正在学习

ゼヅ欢チニ

好东西，很详细

mate

https://www.cmascenter.org/ioapi/download/ioapi-3.1.tar.gz

mate

https://www.cmascenter.org/ioapi/download/ioapi-3.1.tar.gz

mate

https://www.cmascenter.org/ioapi/download/ioapi-3.1.tar.gz

mate

https://www.cmascenter.org/ioapi/download/ioapi-3.1.tar.gz

CMAQQ

首先要感谢楼主分享的帖子，我是刚接触cmaq，自己装了好几天都不行。最后发现了这个帖子。
我在安装netcdf的Fortran库的时候makecheck出现了这个问题，不知道有没有人知道是怎么回事呢


FAIL: nf_test
PASS: create_fills.sh
PASS: tst_f77_v2
PASS: ftest
PASS: tst_f90
============================================================================
Testsuite summary for netCDF-Fortran 4.4.2
============================================================================
# TOTAL: 5
# PASS:  4
# SKIP:  0
# XFAIL: 0
# FAIL:  1
# XPASS: 0
# ERROR: 0
============================================================================
See nf_test/test-suite.log
Please report to support-netcdf@unidata.ucar.edu
============================================================================
Makefile:1408: recipe for target 'test-suite.log' failed
make[3]: *** [test-suite.log] Error 1
make[3]: Leaving directory '/home/zhao/CMAQ_LIBS/netcdf-fortran-4.4.2/nf_test'
Makefile:1514: recipe for target 'check-TESTS' failed
make[2]: *** [check-TESTS] Error 2
make[2]: Leaving directory '/home/zhao/CMAQ_LIBS/netcdf-fortran-4.4.2/nf_test'
Makefile:1825: recipe for target 'check-am' failed
make[1]: *** [check-am] Error 2
make[1]: Leaving directory '/home/zhao/CMAQ_LIBS/netcdf-fortran-4.4.2/nf_test'
Makefile:544: recipe for target 'check-recursive' failed
make: *** [check-recursive] Error 1

vcbfrt

点赞！！！！！！！！

lm8005507771

楼主，我在安装cmaq编译到cctm的时候出现了下面这个问题，


le.o couplewrf.o advbc_map.o hadvyppm.o hcontvel.o hppm.o rdbcon.o x_ppm.o x_yamo.o y_ppm.o y_yamo.o zfdbc.o vppm.o zadvppmwrf.o deform.o hcdiff3d.o hdiff.o rho_j.o VDIFF_MAP.o conv_cgrid.o eddyx.o matrix.o opddep.o opddep_fst.o opddep_mos.o opmet.o rddepv.o rdmet.o tri.o vdiffacm2.o cgrid_depv.o gas_depv_map.o m3dry.o opdepv_diag.o opdepv_fst.o opdepv_mos.o cropcal.o opemis.o tfabove.o tfbelow.o beis3.o checkmem.o chkgrid.o czangle.o getfline.o getparb.o hrno.o parsline.o tmpbeis.o wrdaymsg.o delta_zs.o fire_plmris.o openlayout.o oppt3d_diag.o plmris.o plsprd.o preplm.o ungridb2.o write3_distr.o CSQY_DATA.o PHOT_MOD.o aero_photdata.o o3totcol.o opphot.o phot.o hrdata_mod.o hrcalcks.o hrdriver.o hrg1.o hrg2.o hrg3.o hrg4.o hrinit.o hrprodloss.o hrrates.o hrsolver.o aero_depv.o aero_driver.o aero_subs.o coags.o getpar.o hetchem.o isocom.o isofwd.o isorev.o opdiam.o opvis.o poaage.o AQ_DATA.o acmcld.o aq_map.o aqchem.o cldproc_acm.o convcld_acm.o getalpha.o hlconst.o indexn.o rescld.o scavwdep.o pa_init.o pa_irr.o pa_irr_ctl.o pa_mkhdr.o pa_output.o pa_update.o cksummer.o findex.o get_envlist.o lstepf.o setup_logdev.o subhdomain.o subhfile.o -L/home/15lium/cmaq/cmaq2/CMAQv5.0.1/lib/x86_64/pgf/se_snl -lse_snl -L/home/15lium/cmaq/cmaq2/CMAQv5.0.1/lib/x86_64/pgf/pario -lpario -L/home/15lium/cmaq/cmaq2/CMAQv5.0.1/lib/x86_64/pgf/mpich/lib -lmpich -lmpichf90 -lmpichf90 -lmpich -lopa -lpthread -lrt -L/home/15lium/cmaq/cmaq2/CMAQv5.0.1/lib/x86_64/pgf/ioapi_3.1/Linux2_x86_64pgf -lioapi -L/home/15lium/cmaq/cmaq2/CMAQv5.0.1/lib/x86_64/pgf/netcdf/lib -lnetcdf -lnetcdff -o CCTM_V5g_Linux2_x86_64pgf
/usr/bin/ld: cannot find -lnetcdff
make: *** [CCTM_V5g_Linux2_x86_64pgf] 错误 2
**ERROR** while running make command

FORTRAN STOP
endif
if ( 0 != 0 ) then
if ( -e /home/15lium/cmaq/cmaq2/CMAQv5.0.1/scripts/cctm/cfg.V5g ) then
echo    >>> previous cfg.V5g exists, re-naming to cfg.V5g.old <<<
   >>> previous cfg.V5g exists, re-naming to cfg.V5g.old <<<
unalias mv
mv /home/15lium/cmaq/cmaq2/CMAQv5.0.1/scripts/cctm/cfg.V5g /home/15lium/cmaq/cmaq2/CMAQv5.0.1/scripts/cctm/cfg.V5g.old
endif
cp cfg.V5g.bld /home/15lium/cmaq/cmaq2/CMAQv5.0.1/scripts/cctm/cfg.V5g
if ( ( verbose != no_compile ) && ( verbose != no_link ) && ( verbose != parse_only ) && ( verbose != show_only ) && 1 ) then
mv CCTM_V5g_Linux2_x86_64pgf /home/15lium/cmaq/cmaq2/CMAQv5.0.1/scripts/cctm
mv: 无法获取"CCTM_V5g_Linux2_x86_64pgf" 的文件状态(stat): 没有那个文件或目录
endif
exit


这是什么情况啊，解决不了啊，求楼主帮助，问了别人说有可能是mpich装的有问题，试了一些解决办法也没解决了

Sharon

很详细，感谢分享！