求助！SMOKE点源运行时RPELVCFG程序报错

nowaydrink

求助大神，在用SMOKEv3.1运行点源时smkinven,temporal,grdmat日志文件都正常完成，在elevpoint日志文件时报错，找不到错误具体出在哪个文件。

elevpoint具体代码如下：
This program uses the EPA-AREAL/MCNC-EnvPgms/BAMS Models-3      
     I/O Applications Programming Interface, [I/O API] which is      
     built on top of the netCDF I/O library (Copyright 1993, 1996   
     University Corporation for Atmospheric Research/Unidata         
     Program) and the PVM parallel-programming library (from         
     Oak Ridge National Laboratory).  Copyright (C) 1992-2002 MCNC   
     and Carlie J. Coats, Jr., and 2003-2006 Baron Advanced         
     Meteorological Systems, LLC and released under the GNU LGPL     
     License, version 2.1.  See URL                                 

         http://www.baronams.com/products/ioapi/LGPL.txt            

     for conditions of use.                                          

     Library release tag: $JDate: 2005333 $                          

     $Id: @(#) ioapi library version 3.0 $
     Version with PARMS3.EXT/PARAMETER::MXVARS3=  120
     netCDF version "3.6.3" of May  1 2012 11:19:31 $


     Missing environment variable EXECUTION_ID
     SMOKE ---------------
     Copyright (c)2004 Environmental Modeling for Policy Development
     All rights reserved

     Program ELEVPOINT, Version SMOKEv31_27Sep2012
     Online documentation
         http://www.cep.unc.edu/empd/products/smoke                 

     Program ELEVPOINT specifies elevated point sources in the
     inventory by doing one of the following:
          1) Reads a list of preset "major" point sources
          2) Uses a "cutoff" height and an analytical plume
             rise equation to determine elevated sources for UAM-
             style point source processing.
     It also writes one of the plume-in-grid source files for
     the CMAQ model.


     You will need to enter the logical names for the input and
     output files (and to have set them prior to program start,
     using "setenv <logicalname> <pathname>").

     You may use END_OF-FILE (control-D) to quit the program
     during logical-name entry. Default responses are given in
     brackets [LIKE THIS] and can be accepted by hitting the
     <RETURN> key.

     Value for PROMPTFLAG:  N returning FALSE
     Returning default value TRUE for query:
     "Continue with program?"
     Value for SMK_PING_METHOD:  1
     Value for SMK_ELEV_METHOD:  2
     Value for ELEV_WRITE_LATLON not defined;returning default:   TRUE
     Value for USE_VARIABLE_GRID not defined;returning default:   FALSE
     Value for SMK_SOURCE:  'P'
     NOTE: Elevated source approach is...
          Use PELVCONFIG file to determine srcs for in-line plume rise
     NOTE: Plume-in-grid (PinG) approach is...
          Use PELVCONFIG file to determine PinG sources
     Value for PROMPTFLAG:  N returning FALSE

     File "PNTS" opened for input on unit:  98
     /home/user/SMOKEv3.1/data/inventory/nctox/pnts.map.point.nctox.txt

     Value for PNTS:  '/home/user/SMOKEv3.1/data/inventory/nctox/pnts.map.point.nctox.txt'

WARNING: output file already exists: PSRC
/home/user/SMOKEv3.1/data/inventory/nctox/psrc.txt


     File "PSRC" opened for output on unit:  97
     /home/user/SMOKEv3.1/data/inventory/nctox/psrc.txt

     Value for IOAPI_CHECK_HEADERS not defined;returning default:   FALSE

     "PNTS" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 11 vbles
     NetCDF ID:         6  opened as READONLY            
     Time-independent data.

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/VOC.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         7  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/PM10.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         7  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/PM2_5.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         7  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/PMC.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         7  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     File "PELVCONFIG" opened for input on unit:  96
     /home/user/SMOKEv3.1/data/inventory/nei2005/point/pelvconfig.inline.txt


WARNING: output file already exists: REPPELV
/home/user/SMOKEv3.1/data/reports/nctox/static/reppelv.point.nctox.rpt


     File "REPPELV" opened for output on unit:  95
     /home/user/SMOKEv3.1/data/reports/nctox/static/reppelv.point.nctox.rpt

     WARNING: Number of map-formatted variables is less than number in header of inventory file.
          I/O API header has     8  variables indicated, but map-formated inventory file has     4
     This occurs when the inventory contained pollutants with all zero values.
     You should confirm this in your Smkinven log file.

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/VOC.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         9  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/PM10.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         9  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/PM2_5.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         9  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE

     "TMP_POL_FILE" opened as OLD:READ-ONLY   
     File name "/home/user/SMOKEv3.1/data/inventory/nctox/pnts_dat/PMC.ncf"
     File type GRDDED3
     Execution ID "????????????????"
     Grid name " "
     Dimensions: 9 rows, 1 cols, 1 lays, 8 vbles
     NetCDF ID:         9  opened as READONLY            
     Time-independent data.
     Closing file TMP_POL_FILE
     Reading source data from inventory file...
     Value for GRIDDESC:  '/home/user/SMOKEv3.1/data/ge_dat/GRIDDESC'

     File "GRIDDESC" opened for input on unit:  94
     /home/user/SMOKEv3.1/data/ge_dat/GRIDDESC

     Value for IOAPI_GRIDNAME_1:  'Dazhou'

     File "GRIDDESC" opened for input on unit:  94
     /home/user/SMOKEv3.1/data/ge_dat/GRIDDESC

     Value for IOAPI_ISPH:  '19'
     INITSPHERES:  input sphere Normal Sphere, R_Earth=6370997 M
     Reading elevated source configuration file...
     ERROR: Criteria "NOX" at line        57 is not recognized.
     ERROR: Criteria "SO2" at line        58 is not recognized.

     *** ERROR ABORT in subroutine RPELVCFG
     Problem reading elevated configuration file

雷晨阳

本人购买的smoke排放清单专业机构课程，价值2300元，现在低价出售，有意愿加微信 Alien_Nebo_007里面有详细的本地化流程与脚本排放源讲解