cesm1.1.1运行失败bad acen_tfin

snow495

在运行F_2000.f02_f02这样的case时，提交上任务跑了几分钟就会出现
ENDRUN:*** parampollu_check_adjust_inputs - bad acen_tfin     1  0.0000000E+00
在网上没搜到acen_tfin是个什么东西，求教有无遇见过这个问题的朋友，能否提供解决思路？
附上cesmlog cesm.log.230921-224022 (3.74 MB, 下载次数: 1)

2023-9-21 23:07 上传

点击文件名下载附件

名字真难取

建议把每个分量的log文件，env_run.xml等都发一下。还有，这log文件下载怎么还要金钱的。。
另外，没有必要的话还是用新一点的版本吧，1.1也实在太老旧了。。。
如果实在没看到什么明显的报错信息的话，可以看看是不是内存不够之类的问题

Lancelot

1.1.1甚至不是个稳定版吧

snow495

名字真难取 发表于 2023-9-22 13:16
建议把每个分量的log文件，env_run.xml等都发一下。还有，这log文件下载怎么还要金钱的。。
另外，没有必 ...

不好意思，我发的时候也发现了附件下载要钱，但没找到怎么设置，后面文件我也不传了先。
检查了其他的log，cpl已完成所有模式的初始化，cam停在了读取ozone的部分只打印了两行，clm最后为：
dtime_sync=          900  dtime_clm=          900  mod =            0
(lnd_init_mct) :Atmospheric input is from a prognostic model
clm2: completed timestep            0
clm2: completed timestep            1
rof未开启
ocn和ice均停在读取规定的sst。
在此之前均无明显错误。
env_run.xml我复制过来：
<!--"case run directory (by default will be set to $EXEROOT/../run) (char) " -->
<entry id="RUNDIR"   value="xx/CESM/cesm1_1_1/$CASE/"  />

<!--"CCSM tag (char) " -->
<entry id="CCSM_REPOTAG"   value="spcam2_0-cesm1_1_1"  />

<!--"case description (char) " -->
<entry id="CASESTR"   value="UNSET"  />

<!-- ====================================== -->

<!--"Run initialization type, valid values: startup,hybrid,branch (char) " -->
<entry id="RUN_TYPE"   value="startup"  />

<!--"Run start date (yyyy-mm-dd). Only used for startup or hybrid runs (char) " -->
<entry id="RUN_STARTDATE"   value="2008-01-01"  />

<!--"start time-of-day (integer) " -->
<entry id="START_TOD"   value="0"  />

<!--"Reference case for hybrid or branch runs (char*256) " -->
<entry id="RUN_REFCASE"   value="case.std"  />

<!--"Reference date for hybrid or branch runs (yyyy-mm-dd) (char*10) " -->
<entry id="RUN_REFDATE"   value="0001-01-01"  />

<!--"Reference time of day (seconds) for hybrid or branch runs (sssss) (char) " -->
<entry id="RUN_REFTOD"   value="00000"  />

<!--"allow same branch casename as reference casename, valid values: TRUE,FALSE (logical) " -->
<entry id="BRNCH_RETAIN_CASENAME"   value="FALSE"  />

<!--"flag for automatically prestaging the refcase restart dataset, valid values: TRUE,FALSE (logical) " -->
<entry id="GET_REFCASE"   value="FALSE"  />

<!-- ====================================== -->

<!--"sets the run length with STOP_N and STOP_DATE (must be nyear(s) for _GLC compsets for restarts to work properly), valid values: none,never,nsteps,nstep,nseconds,nsecond,nminutes,nminute,nhours,nhour,ndays,nday,nmonths,nmonth,nyears,nyear,date,ifdays0,end (char) " -->
<entry id="STOP_OPTION"   value="nmonth"  />

<!--"sets the run length with STOP_OPTION and STOP_DATE (integer) " -->
<entry id="STOP_N"   value="3"  />

<!--"date in yyyymmdd format, sets the run length with STOP_OPTION and STOP_N (integer) " -->
<entry id="STOP_DATE"   value="-999"  />

<!-- ====================================== -->

<!--"sets frequency of model restart writes (same options as STOP_OPTION) (must be nyear(s) for_GLC compsets) (char) " -->
<entry id="REST_OPTION"   value="$STOP_OPTION"  />

<!--"sets model restart writes with REST_OPTION and REST_DATE (char) " -->
<entry id="REST_N"   value="$STOP_N"  />

<!--"date in yyyymmdd format, sets model restart write date with REST_OPTION and REST_N (char) " -->
<entry id="REST_DATE"   value="$STOP_DATE"  />

<!--"A setting of TRUE implies a continuation run, valid values: TRUE,FALSE (logical) " -->
<entry id="CONTINUE_RUN"   value="FALSE"  />

<!--"If RESUBMIT is greater than 0, then case will automatically resubmit (integer) " -->
<entry id="RESUBMIT"   value="0"  />

<!-- ====================================== -->

<!--"base period associated with NCPL coupling frequency, valid values: hour,day,year,decade (char) " -->
<entry id="NCPL_BASE_PERIOD"   value="day"  />

<!--"number of atm coupling intervals per NCPL_BASE_PERIOD (integer) (char) " -->
<entry id="ATM_NCPL"   value="96"  />

<!--"number of land coupling intervals per NCPL_BASE_PERIOD (integer) (char) " -->
<entry id="LND_NCPL"   value="$ATM_NCPL"  />

<!--"number of ice coupling intervals per NCPL_BASE_PERIOD (integer) (char) " -->
<entry id="ICE_NCPL"   value="$ATM_NCPL"  />

<!--"number of ocn coupling intervals per NCPL_BASE_PERIOD (integer) (char) " -->
<entry id="OCN_NCPL"   value="$ATM_NCPL"  />

<!--"number of glc coupling intervals per NCPL_BASE_PERIOD (integer) (char) " -->
<entry id="GLC_NCPL"   value="1"  />

<!--"number of rof coupling intervals per NCPL_BASE_PERIOD (integer) (char) " -->
<entry id="ROF_NCPL"   value="8"  />

<!--"if TRUE, treats ocean model like lnd/ice in coupling, valid values: TRUE,FALSE (logical) "-->
<entry id="OCN_TIGHT_COUPLING"   value="TRUE"  />

<!-- ====================================== -->

<!--"mpi run command (char) " -->
<entry id="MPI_RUN_COMMAND"   value="UNSET"  />

<!-- ====================================== -->

<!--"TRUE implies perform asynchronous i/o, valid values: TRUE,FALSE (logical) " -->
<entry id="PIO_ASYNC_INTERFACE"   value="FALSE"  />

<!--"mpi task stride between io tasks (integer) " -->
<entry id="PIO_STRIDE"   value="-1"  />

<!--"pio root processor (integer) " -->
<entry id="PIO_ROOT"   value="1"  />

<!--"pio number of io tasks (integer) " -->
<entry id="PIO_NUMTASKS"   value="-1"  />

<!--"pio io type, valid values: netcdf,pnetcdf,netcdf4p,netcdf4c,default (char) " -->
<entry id="PIO_TYPENAME"   value="netcdf"  />

<!--"pio debug level, valid values: 0,1,2,3,4,5,6 (integer) " -->
<entry id="PIO_DEBUG_LEVEL"   value="0"  />

<!--"pio blocksize (integer) " -->
<entry id="PIO_BLOCKSIZE"   value="-1"  />

<!--"pio buffer size limit (integer) " -->
<entry id="PIO_BUFFER_SIZE_LIMIT"   value="-1"  />

<!--"pio stride (integer) " -->
<entry id="OCN_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="OCN_PIO_ROOT"   value="0"  />

<!--"pio number of io tasks (integer) " -->
<entry id="OCN_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="OCN_PIO_TYPENAME"   value="nothing"  />

<!--"pio stride (integer) " -->
<entry id="LND_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="LND_PIO_ROOT"   value="-99"  />

<!--"pio number of io tasks (integer) " -->
<entry id="LND_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="LND_PIO_TYPENAME"   value="nothing"  />

<!--"pio stride (integer) " -->
<entry id="ROF_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="ROF_PIO_ROOT"   value="-99"  />

<!--"pio number of io tasks (integer) " -->
<entry id="ROF_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="ROF_PIO_TYPENAME"   value="nothing"  />

<!--"pio stride (integer) " -->
<entry id="ICE_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="ICE_PIO_ROOT"   value="-99"  />

<!--"pio number of io tasks (integer) " -->
<entry id="ICE_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="ICE_PIO_TYPENAME"   value="nothing"  />

<!--"pio stride (integer) " -->
<entry id="ATM_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="ATM_PIO_ROOT"   value="-99"  />

<!--"pio number of io tasks (integer) " -->
<entry id="ATM_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="ATM_PIO_TYPENAME"   value="nothing"  />

<!--"pio stride (integer) " -->
<entry id="CPL_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="CPL_PIO_ROOT"   value="-99"  />

<!--"pio number of io tasks (integer) " -->
<entry id="CPL_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="CPL_PIO_TYPENAME"   value="nothing"  />

<!--"pio stride (integer) " -->
<entry id="GLC_PIO_STRIDE"   value="-99"  />

<!--"pio root processor (integer) " -->
<entry id="GLC_PIO_ROOT"   value="-99"  />

<!--"pio number of io tasks (integer) " -->
<entry id="GLC_PIO_NUMTASKS"   value="-99"  />

<!--"pio io type, valid values: nothing,netcdf,pnetcdf,netcdf4p,netcdf4c (char) " -->
<entry id="GLC_PIO_TYPENAME"   value="nothing"  />

<!-- ====================================== -->

<!--"logical that turns on diagnostic budgets, valid values: TRUE,FALSE (logical) " -->
<entry id="BUDGETS"   value="FALSE"  />

<!--"Turns on component varying thread control in the driver, valid values: TRUE,FALSE (logical) " -->
<entry id="DRV_THREADING"   value="FALSE"  />

<!--"Turns on component barriers for component timing, valid values: TRUE,FALSE (logical) " -->
<entry id="COMP_RUN_BARRIERS"   value="FALSE"  />

<!--"turns on bit-for-bit reproducibility with varying pe counts in coupler, valid values: TRUE,FALSE (logical) " -->
<entry id="BFBFLAG"   value="FALSE"  />

<!--"level of debug output, 0=minimum, 1=normal, 2=more, 3=too much, valid values: 0,1,2,3 (integer) " -->
<entry id="INFO_DBUG"   value="1"  />

<!--"timer output depth (integer) " -->
<entry id="TIMER_LEVEL"   value="12"  />

<!--"cpl decomp option, valid values: 0,1,2,3,4,5,6 (integer) " -->
<entry id="CPL_DECOMP"   value="0"  />

<!--"logical to diagnose model timing at the end of the run, valid values: TRUE,FALSE (logical)" -->
<entry id="CHECK_TIMING"   value="TRUE"  />

<!--"logical to save timing files in rundir, valid values: TRUE,FALSE (logical) " -->
<entry id="SAVE_TIMING"   value="FALSE"  />

<!-- ====================================== -->

<!--"sets coupler snapshot history file frequency (like REST_OPTION) (char) " -->
<entry id="HIST_OPTION"   value="never"  />

<!--"sets coupler snapshot history file frequency (like REST_N) (char) " -->
<entry id="HIST_N"   value="-999"  />

<!--"yyyymmdd format, sets coupler snapshot history date (like REST_DATE) (integer) " -->
<entry id="HIST_DATE"   value="-999"  />

<!-- ====================================== -->

<!--"command used to query batch system (char) " -->
<entry id="BATCHQUERY"   value=""  />

<!--"command used to submit to batch system (char) " -->
<entry id="BATCHSUBMIT"   value="sbatch"  />

<!-- ====================================== -->

<!--"local inputdata directory for CCSM prestaged data (char) " -->
<entry id="DIN_LOC_ROOT"   value="/data/CESM/inputdata"  />

<!--"general ccsm inputdata directory for CLM datm forcing (char) " -->
<entry id="DIN_LOC_ROOT_CLMFORC"   value="/data/CESM/inputdata"  />

<!-- ====================================== -->

<!--"directory where log files should be copied (char) " -->
<entry id="LOGDIR"   value="$CASEROOT/logs"  />

<!--"logical to turn on short term archiving, valid values: TRUE,FALSE (logical) " -->
<entry id="DOUT_S"   value="FALSE"  />

<!--"local short term archiving root directory (char) " -->
<entry id="DOUT_S_ROOT"   value="USERDEFINED_optional_run"  />

<!--"logical to archive all interim restart files, not just those at eor, valid values: TRUE,FALSE (logical) " -->
<entry id="DOUT_S_SAVE_INT_REST_FILES"   value="FALSE"  />

<!--"logical to turn on long term archiving (if DOUT_S is also TRUE), valid values: TRUE,FALSE (logical) " -->
<entry id="DOUT_L_MS"   value="FALSE"  />

<!--"local long term archiving root directory (char) " -->
<entry id="DOUT_L_MSROOT"   value="USERDEFINED_optional_run"  />

<!--"hpss account number (char) " -->
<entry id="DOUT_L_HPSS_ACCNT"   value="00000000"  />

<!--"logical to tar up long term archiver history files, valid values: TRUE,FALSE (logical) " -->
<entry id="DOUT_L_HTAR"   value="FALSE"  />

<!--"standard ccsm baselines directory for testing (char) " -->
<entry id="CCSM_BASELINE"   value="USERDEFINED_optional_run"  />

<!--"standard location of the cprnc tool (char) " -->
<entry id="CCSM_CPRNC"   value="USERDEFINED_optional_test"  />

<!-- ====================================== -->

<!--"CAM namelist use_case (char) " -->
<entry id="CAM_NML_USE_CASE"   value="UNSET"  />

<!--"CAM specific namelist settings for -namelist option (char) " -->
<entry id="CAM_NAMELIST_OPTS"   value="dust_emis_fact=0.50"  />

<!-- ====================================== -->

<!--"CLM build-namelist options (char) " -->
<entry id="CLM_BLDNML_OPTS"   value=""  />

<!--"CLM namelist use_case (char) " -->
<entry id="CLM_NML_USE_CASE"   value="2000_control"  />

<!--"CLM specific namelist settings (char) " -->
<entry id="CLM_NAMELIST_OPTS"   value=""  />

<!--"clm co2 type, valid values: constant,diagnostic,prognostic (char) " -->
<entry id="CLM_CO2_TYPE"   value="diagnostic"  />

<!--"Force CLM model to do a cold-start, valid values: on,off (char) " -->
<entry id="CLM_FORCE_COLDSTART"   value="off"  />

<!--"My Data ID (char) " -->
<entry id="CLM_USRDAT_NAME"   value="UNSET"  />

<!-- ====================================== -->

<!--"DOCN mode, valid values: prescribed,som,null (char) " -->
<entry id="DOCN_MODE"   value="prescribed"  />

<!--"Sets SOM forcing data filename for pres runs, only used in D and E compset (char) " -->
<entry id="DOCN_SOM_FILENAME"   value="UNSET"  />

<!-- ====================================== -->

<!--"CICE specific namelist settings for -namelist option (char) " -->
<entry id="CICE_NAMELIST_OPTS"   value=""  />

<!-- ====================================== -->

<!-- ====================================== -->

<!-- ====================================== -->

<!--"Sets sst/ice_cov stream name for pres runs, only used in F,A compset (char) " -->
<entry id="SSTICE_STREAM"   value="CAMDATA"  />

<!--"Sets sst/ice_cov data filename for prescribed runs, only used in F,A compset (char) " -->
<entry id="SSTICE_DATA_FILENAME"   value="$DIN_LOC_ROOT/atm/cam/sst/sst_HadOIBl_bc_0.23x0.31_clim_c110526.nc"  />

<!--"Sets sst/ice_cov grid filename for pres runs, only used in F,A compset (char) " -->
<entry id="SSTICE_GRID_FILENAME"   value="$DIN_LOC_ROOT/atm/cam/ocnfrac/domain.camocn.0.23x0.31_gx1v6_101108.nc"  />

<!--"Sets model year align of sst/ice_cov for pres runs, only used in F,A compset (integer) " -->
<entry id="SSTICE_YEAR_ALIGN"   value="1"  />

<!--"Sets year start of sst/ice_cov for pres runs, only used in F,A compset (integer) " -->
<entry id="SSTICE_YEAR_START"   value="0"  />

<!--"Sets year end of sst/ice_cov for pres runs, only used in F,A compset (integer) " -->
<entry id="SSTICE_YEAR_END"   value="0"  />

<!-- ====================================== -->

<!--"Only used for C,G compsets: if ocn, ocn provides EP balance factor for precip, valid values: off,ocn (char) " -->
<entry id="CPL_EPBAL"   value="off"  />

<!--"Only used for C,G compsets: if true, compute albedos to work with daily avg SW down, validvalues: true,false (logical) " -->
<entry id="CPL_ALBAV"   value="false"  />

<!--"BGC flag, valid values: none,CO2A,CO2B,CO2C,CO2_DMSA (char) " -->
<entry id="CCSM_BGC"   value="CO2A"  />

<!--"Glacier model number of elevation classes, 0 implies no glacier land unit in clm, valid values: 0,1,3,5,10 (integer) " -->
<entry id="GLC_NEC"   value="0"  />

<!--"CO2 ppmv (real) " -->
<entry id="CCSM_CO2_PPMV"   value="367.0"  />

<!-- ====================================== -->

<!--"atm domain file (char) " -->
<entry id="ATM_DOMAIN_FILE"   value="domain.lnd.fv0.23x0.31_gx1v6.100517.nc"  />

<!--"path of atm domain file (char) " -->
<entry id="ATM_DOMAIN_PATH"   value="$DIN_LOC_ROOT/share/domains"  />

<!--"lnd domain file (char) " -->
<entry id="LND_DOMAIN_FILE"   value="domain.lnd.fv0.23x0.31_gx1v6.100517.nc"  />

<!--"path of lnd domain file (char) " -->
<entry id="LND_DOMAIN_PATH"   value="$DIN_LOC_ROOT/share/domains"  />

<!--"rof domain file (char) " -->
<entry id="ROF_DOMAIN_FILE"   value="UNSET"  />

<!--"path of rof domain file (char) " -->
<entry id="ROF_DOMAIN_PATH"   value="$DIN_LOC_ROOT/share/domains"  />

<!--"ice domain file (char) " -->
<entry id="ICE_DOMAIN_FILE"   value="domain.ocn.0.23x0.31_gx1v6_101108.nc"  />

<!--"path of ice domain file (char) " -->
<entry id="ICE_DOMAIN_PATH"   value="$DIN_LOC_ROOT/share/domains"  />

<!--"ocn domain file (char) " -->
<entry id="OCN_DOMAIN_FILE"   value="domain.ocn.0.23x0.31_gx1v6_101108.nc"  />

<!--"path of ocn domain file (char) " -->
<entry id="OCN_DOMAIN_PATH"   value="$DIN_LOC_ROOT/share/domains"  />
关于版本问题：师姐给的就是这个版本，这个问题实在解决不了的话我跟老师反馈一下可否移植新版本。感谢建议！

名字真难取

snow495 发表于 2023-9-23 23:19
不好意思，我发的时候也发现了附件下载要钱，但没找到怎么设置，后面文件我也不传了先。
检查了其他的lo ...

抱歉，我也没遇到过你说的这个问题。
不过按照我之前跑的经验来看，可以重点检查中断的模式在env_run.xml中的参数。你这里我建议可以查一查cam和clm的，特别是env_run.xml中和耦合、积分步长、输出文件有关的参数。
希望能对你有一些帮助