关于flexpart运行的报错

Gong

由于11的版本不知道是什么问题，虽然成功运行但是粒子似乎没有正常被释放，所以转为了使用较多的10.4，但是还是遇到了问题，麻烦各位前辈帮忙看看，给出建议，以下是我的终端输出信息：
root@LAPTOP-HETNQ246:/usr/local/flexpart_v10.4_3d7eebf# ./FLEXPART
Welcome to FLEXPART Version 10.4 (2019-11-12)
FLEXPART is free software released under the GNU General Public License.
FLEXPART WARNING: TIME DIFFERENCE BETWEEN TWO
WIND FIELDS IS BIG. THIS MAY CAUSE A DEGRADATION
OF SIMULATION QUALITY.
NCEP metdata detected


Vertical levels in NCEP data:      41     41

Mother domain:
  Longitude range:    -179.00     181.00   Grid distance:       1.00
  Latitude range :     -90.00      90.00   Grid distance:       1.00

Releasepoints :            1

SPECIES:  24  AIRTRACER   (GAS)
   Wet removal for gases      is turned: OFF
   Dry deposition for gases   is turned: OFF
   Below-cloud scavenging: OFF
   In-cloud scavenging: OFF
Particles allocated (maxpart)  :       100000
Particles released (numpartmax):       200000
Total mass released: 1.0000000E+00
Allocating fields for global output (x,y):           85          65
Allocating fields for nested output (x,y):            0           0
Concentrations are calculated using kernel
Simulated     0.0 hours (            0 s),             0 particles
Global NCEP fields: using cloud water
Global NCEP fields: using cloud water
Atm. mass:    1.76812664E+15
Segmentation fault (core dumped)

Gong

该问题已解决，参考我的另一个帖子