请问如何在剖面图上标示廓线的值

youxia1873

最近画了张图，
可是图上每条线的值却没有... 各位大神，请问哪个命令是管这个的？
我的gs文件如下：

1. 'reinit''open e:/OpenGrADS/orog/orog.ctl''open f:/20140823/12.ctl''enable print f:/20140823/mask.gmf''set grads off''set grid off''set ylint 100''set xlpos -10''set parea 1.48 10.49 1.02 7.98'****parea 给定位置绘图****'set ylopts 1 6 0.18''set zlog on''set lon 90 130''set lat 38''set t 1''set lev 1000 200''set gxout shaded''set rbcols 1''set cmin 1''d smth9(orog)''set dfile 2''set ylint 100''set xlpos -10''set map 1 1 10''set cterp on''set lat 20 45''set lon 88 130''set t 1''set lev 1000 200''set zlog on''set clab masked''define div=hdivg(UGRDprs,VGRDprs)''define vor=hcurl(UGRDprs,VGRDprs)''set parea 1.48 10.49 1.02 7.98''set lat 38''set lon 90 130''set t 1''set lev 1000 200''set clopts 1 6 0.15''set cthick 5''set cint 1''set rbcols 1''set gxout contour';'d smth9(div*100000)''run axis.gs -type b -position o -label on  -interval 4 -sinterval 2 -size 0.15 -color 1 -lthick 6 -lfont 0 -lsize 0.15''print''disable print';

'reinit''open e:/OpenGrADS/orog/orog.ctl''open f:/20140823/12.ctl''enable print f:/20140823/mask.gmf''set grads off''set grid off''set ylint 100''set xlpos -10''set parea 1.48 10.49 1.02 7.98'****parea 给定位置绘图****'set ylopts 1 6 0.18''set zlog on''set lon 90 130''set lat 38''set t 1''set lev 1000 200''set gxout shaded''set rbcols 1''set cmin 1''d smth9(orog)''set dfile 2''set ylint 100''set xlpos -10''set map 1 1 10''set cterp on''set lat 20 45''set lon 88 130''set t 1''set lev 1000 200''set zlog on''set clab masked''define div=hdivg(UGRDprs,VGRDprs)''define vor=hcurl(UGRDprs,VGRDprs)''set parea 1.48 10.49 1.02 7.98''set lat 38''set lon 90 130''set t 1''set lev 1000 200''set clopts 1 6 0.15''set cthick 5''set cint 1''set rbcols 1''set gxout contour';'d smth9(div*100000)''run axis.gs -type b -position o -label on  -interval 4 -sinterval 2 -size 0.15 -color 1 -lthick 6 -lfont 0 -lsize 0.15''print''disable print';

youxia1873

1. 'reinit'
   
2. 'open e:/OpenGrADS/orog/orog.ctl'
   
3. 'open f:/20140823/12.ctl'
   
4. 'enable print f:/20140823/mask.gmf'
   
5. 'set grads off'
   
6. 'set grid off'
   
7. 'set ylint 100'
   
8. 'set xlpos -10'
   
9. 'set parea 1.48 10.49 1.02 7.98'
   
10. ****parea 给定位置绘图****
    
11. 'set ylopts 1 6 0.18'
    
12. 'set zlog on'
    
13. 'set lon 90 130'
    
14. 'set lat 38'
    
15. 'set t 1'
    
16. 'set lev 1000 200'
    
17. 'set gxout shaded'
    
18. 'set rbcols 1'
    
19. 'set cmin 1'
    
20. 'd smth9(orog)'
    
21. 
    
22. 'set dfile 2'
    
23. 'set ylint 100'
    
24. 'set xlpos -10'
    
25. 'set map 1 1 10'
    
26. 'set cterp on'
    
27. 'set lat 20 45'
    
28. 'set lon 88 130'
    
29. 'set t 1'
    
30. 'set lev 1000 200'
    
31. 'set zlog on'
    
32. 'set clab masked'
    
33. 'define div=hdivg(UGRDprs,VGRDprs)'
    
34. 'define vor=hcurl(UGRDprs,VGRDprs)'
    
35. 'set parea 1.48 10.49 1.02 7.98'
    
36. 'set lat 38'
    
37. 'set lon 90 130'
    
38. 'set t 1'
    
39. 'set lev 1000 200'
    
40. 'set clopts 1 6 0.15'
    
41. 'set cthick 5'
    
42. 'set cint 1'
    
43. 'set rbcols 1'
    
44. 'set gxout contour';'d smth9(div*100000)'
    
45. 'run axis.gs -type b -position o -label on  -interval 4 -sinterval 2 -size 0.15 -color 1 -lthick 6 -lfont 0 -lsize 0.15'
    
46. 'print'
    
47. 'disable print'
    
48. ;

复制代码

youxia1873

将代码重新发了一下，各位大神帮帮忙吧

river

youxia1873 发表于 2014-9-28 12:24
将代码重新发了一下，各位大神帮帮忙吧

估计是你GrADS有问题

一水天下

试试注释'set clab masked'

youxia1873

一水天下 发表于 2014-9-28 13:08
试试注释'set clab masked'

大神威武 ！