cnvgrib安装

weiweicf

按照这个http://www.nco.ncep.noaa.gov/pmb/codes/GRIB2/Build_cnvgrib.pdf安装cnvgrib，zlib,libpng,jasper都安装在/opt文件夹下，也安装了g2lib，w3lib，最后安cnvgrib，出现如下警告，没有理它，
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o gds2gdt.o gds2gdt.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o pds2pdt.o pds2pdt.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o pds2pdtens.o pds2pdtens.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o cnvgrib.o cnvgrib.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o cnv12.o cnv12.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o cnv22.o cnv22.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o cnv21.o cnv21.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o gdt2gds.o gdt2gds.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o makepds.o makepds.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o putgbexn.o putgbexn.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o makepdsens.o makepdsens.f
pgf90 -O3 -g -I /var/ftp/pub/share/ncoops/g2lib-1.4.0  -c -o setbit.o setbit.f
pgf90  -o cnvgrib gds2gdt.o pds2pdt.o pds2pdtens.o cnvgrib.o cnv12.o cnv22.o cnv21.o gdt2gds.o makepds.o putgbexn.o makepdsens.o setbit.o -L/opt/cnvgrib/lib -lg2 -L/opt/cnvgrib/lib -lw3 -L/opt/jasper-1.900.1/lib -L/opt/libpng-1.6.17/lib -L/opt/zlib-1.2.8/lib -ljasper -lpng -lz
/opt/jasper-1.900.1/lib/libjasper.a(jas_stream.o): In function `jas_stream_tmpfile':
jas_stream.c:(.text+0x1599): warning: the use of `tmpnam' is dangerous, better use `mkstemp'

转化gfs数据时出错，bash: cnvgrib: command not found，这是什么原因呢？请各位大侠指导啊。以下是我的makefile文件

SHELL=/bin/sh
#
SRCS=   gds2gdt.f pds2pdt.f pds2pdtens.f cnvgrib.f cnv12.f cnv22.f \
        cnv21.f gdt2gds.f makepds.f putgbexn.f makepdsens.f setbit.f
OBJS=   gds2gdt.o pds2pdt.o pds2pdtens.o cnvgrib.o cnv12.o cnv22.o \
        cnv21.o gdt2gds.o makepds.o putgbexn.o makepdsens.o setbit.o
# Tunable parameters
#
# FC            Name of the fortran compiling system to use
# LDFLAGS       Flags to the loader
# LIBS          List of libraries
# CMD           Name of the executable
# PROFLIB       Library needed for profiling
#
#     G95 Fortran Compiler
#
FC = pgf90
#
#
#     Gfortran (GPL) Fortran Compiler
#
# FC = gfortran
#
#LDFLAGS = -p -bnoquiet -bloadmap:mug
#LDFLAGS = -pg
LDFLAGS =
INC = -I /var/ftp/pub/share/ncoops/g2lib-1.4.0
LIBS = -L/opt/cnvgrib/lib -lg2\
       -L/opt/cnvgrib/lib -lw3\
       -L/opt/jasper-1.900.1/lib -L/opt/libpng-1.6.17/lib -L/opt/zlib-1.2.8/lib -ljasper -lpng -lz
CMD =           cnvgrib
PROFLIB =       -lprof
# To perform the default compilation, use the first line
# To compile with flowtracing turned on, use the second line
# To compile giving profile additonal information, use the third line
# WARNING:  SIMULTANEOUSLY PROFILING AND FLOWTRACING IS NOT RECOMMENDED
#FFLAGS =       -O3 -pg -qrealsize=4 $(INC)
FFLAGS  = -O3 -g $(INC)
#FFLAGS =        -F
#FFLAGS =        -Wf"-ez"
# Lines from here on down should not need to be changed.  They are the
# actual rules which make uses to build a.out.
#
all:            $(CMD)
$(CMD):         $(OBJS)
        $(FC) $(LDFLAGS) -o $(@) $(OBJS) $(LIBS)
# Make the profiled version of the command and call it a.out.prof
#
$(CMD).prof:    $(OBJS)
        $(FC) $(LDFLAGS) -o $(@) $(OBJS) $(PROFLIB) $(LIBS)
clean:
        -rm -f $(OBJS)
clobber:        clean
        -rm -f $(CMD) $(CMD).prof
void:   clobber
        -rm -f $(SRCS) makefile

mxgang

请问 你的这个问题解决了吗？

weiweicf

mxgang 发表于 2016-7-13 16:44
请问 你的这个问题解决了吗？

没有，后来就没用了

sophiea

g2lib是怎么安装的？

sophiea

请问你那里有没有低版本的g2clib？

※剑桥¤

mxgang 发表于 2016-7-13 16:44
请问 你的这个问题解决了吗？

后来你找到解决问题的办法了吗？