- 积分
- 1631
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2016-3-8
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看，没有帐号？立即注册
x
第一次run wrf ,但是总弄不对，希望大神们帮忙解答一下
namelist.inpout
&time_control
run_days = 0,
run_hours = 24,
run_minutes = 0,
run_seconds = 0,
start_year = 2015,
start_month = 12,
start_day = 01,
start_hour = 00,
start_minute = 00,
start_second = 00,
end_year = 2015,
end_month = 12,
end_day = 02,
end_hour = 00,
end_minute = 00,
end_second = 00,
这是rsl.error.0000
taskid: 0 hostname: localhost.localdomain
Namelist logging not found in namelist.input. Using registry defaults for variables in logging.
Ntasks in X 1 , ntasks in Y 1
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to 4
WRF V3.5.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 165 1 98
ims,ime,jms,jme -4 170 -4 103
ips,ipe,jps,jpe 1 165 1 98
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 2473038528 bytes allocated
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 2.76420 elapsed seconds
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 16 SNOW CATEGORY = 24
INITIALIZE THREE Noah LSM RELATED TABLES
LANDUSE TYPE = USGS FOUND 27 CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND 19 CATEGORIES
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
TSURFACE0_URB 293.8031
TDEEP0_URB 298.8891
IVGTYP 1
TR_URB2D 293.8031
TB_URB2D 293.8031
TG_URB2D 293.8031
TC_URB2D 293.8031
QC_URB2D 9.9999998E-03
XXXR_URB2D 0.000000
SH_URB2D 0.000000
LH_URB2D 0.000000
G_URB2D 0.000000
RN_URB2D 0.000000
TS_URB2D 293.8031
LF_AC_URB3D 0.000000
SF_AC_URB3D 0.000000
CM_AC_URB3D 0.000000
SFVENT_URB3D 0.000000
LFVENT_URB3D 0.000000
FRC_URB2D 0.9000000
UTYPE_URB2D 2
I 21 J 20
num_urban_hi 15
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
D01 3-D analysis nudging for wind is applied and Guv= 0.3000E-03
D01 3-D analysis nudging for temperature is applied and Gt= 0.3000E-03
D01 3-D analysis nudging for water vapor mixing ratio is applied and Gq= 0.1000E-04
D01 3-D analysis nudging for temperature is turned off within the PBL.
D01 3-D analysis nudging for water vapor mixing ratio is turned off within the PBL.
D01 surface analysis nudging for wind is applied and Guv_sfc= 0.3000E-03
D01 surface analysis nudging for temperature is applied and Gt_sfc= 0.3000E-03
D01 surface analysis nudging for water vapor mixing ratio is applied and Gq_sfc= 0.1000E-04
*********************************************************************
* PROGRAM:WRF/CHEM V3.5.1 MODEL
* *
* PLEASE REPORT ANY BUGS TO WRF/CHEM HELP at *
* *
* wrfchemhelp.gsd@noaa.gov *
* *
*********************************************************************
WARNING: SAPRC99_MOSAIC_4BIN_VBS2_4BIN chemistry option is highly experimental and not recommended for use.
call ftuv phot initialization
ftuv_init: calling photo_inti for id = 1
output from subr init_data_mosaic_ptr
nphase_aer = 1
iphase = 1
ntype_aer = 1
itype = 1
nsize_aer = 4
lptr_so4_aer 98 125 152 179
lptr_no3_aer 99 126 153 180
lptr_cl_aer 100 127 154 181
lptr_msa_aer 1 1 1 1
lptr_co3_aer 210 211 212 213
lptr_nh4_aer 101 128 155 182
lptr_na_aer 102 129 156 183
lptr_ca_aer 206 207 208 209
lptr_oin_aer 103 130 157 184
lptr_oc_aer 104 131 158 185
lptr_bc_aer 105 132 159 186
hyswptr_aer 106 133 160 187
waterptr_aer 107 134 161 188
numptr_aer 124 151 178 205
biog4_o_aer 1 1 1 1
massptr_aer(), ll 98 125 152 179 1
massptr_aer(), ll 99 126 153 180 2
massptr_aer(), ll 100 127 154 181 3
massptr_aer(), ll 210 211 212 213 4
massptr_aer(), ll 101 128 155 182 5
massptr_aer(), ll 102 129 156 183 6
massptr_aer(), ll 206 207 208 209 7
massptr_aer(), ll 103 130 157 184 8
massptr_aer(), ll 104 131 158 185 9
massptr_aer(), ll 105 132 159 186 10
massptr_aer(), ll 108 135 162 189 11
massptr_aer(), ll 109 136 163 190 12
massptr_aer(), ll 110 137 164 191 13
massptr_aer(), ll 111 138 165 192 14
massptr_aer(), ll 112 139 166 193 15
massptr_aer(), ll 113 140 167 194 16
massptr_aer(), ll 114 141 168 195 17
massptr_aer(), ll 115 142 169 196 18
massptr_aer(), ll 116 143 170 197 19
massptr_aer(), ll 117 144 171 198 20
massptr_aer(), ll 118 145 172 199 21
massptr_aer(), ll 119 146 173 200 22
massptr_aer(), ll 120 147 174 201 23
massptr_aer(), ll 121 148 175 202 24
massptr_aer(), ll 122 149 176 203 25
massptr_aer(), ll 123 150 177 204 26
ltot, ltot2, lmaxd, l2maxd = 213 215 1200 1200
*** subr move_sections - method = 20
*** subr move_sections - idiag = 0
Timing for Writing wrfout_d01_2015-12-01_00:00:00 for domain 1: 5.24052 elapsed seconds
d01 2015-12-01_00:00:00 Input data processed for aux input 4 for domain 1
mediation_integrate: med_read_wrf_chem_emissions: Open file wrfchemi_00z_d01
HOURLY EMISSIONS UPDATE TIME 0.0 0.0
mediation_integrate: med_read_wrf_chem_emissions: Read emissions for time 2015-12-01_00:00:00
d01 2015-12-01_00:00:00 MMINLU error on input
**WARNING** Time in input file not being checked **WARNING**
d01 2015-12-01_00:00:00 Input data processed for aux input 9 for domain 1
d01 2015-12-01_00:00:00 Input data processed for aux input 10 for domain 1
Timing for processing lateral boundary for domain 1: 0.39203 elapsed seconds
也没有报错啊，搞不懂 就只生成了1个小时。求指导
|
-
这是报错
-
这是生成的那一个小时
|
窥视卡
雷达卡
发表于 2016-3-8 16:16:45
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
楼主
{:5_275:}{:5_275:}坐等大神解答
