- 积分
- 214
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2011-12-15
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
本帖最后由 66kqkq 于 2016-6-26 16:23 编辑
分享一个CAM5.3的 C shell脚本
#! /usr/bin/csh -f
##=======================================================================
setenv OMP_NUM_THREADS 6
setenv XLSMPOPTS "stack=256000000"
setenv OMP_DYNAMIC false
setenv AIXTHREAD_SCOPE S
setenv MALLOCMULTIHEAP true
setenv MP_USE_BULK_XFER yes
setenv MP_LABELIO yes
limit stacksize unlimited
set camroot = /.../cesm1_2_2 #CESM 的代码路径
set ntasks = 72 #自己根据实际情况定义
set case = ...
set runtype = ... #startup; continue 自己选择
set stop_n = ... #自己根据实际情况定义
set stop_option = nmonths
set restr = monthly
set nx = 12
set ny = 6
set rundir = $camroot/sensitive/$case
set blddir = $rundir/bld
set cfgdir = $camroot/models/atm/cam/bld
mkdir -p $rundir || echo "cannot create $rundir" && exit 1
mkdir -p $blddir || echo "cannot create $blddir" && exit 1
## If an executable doesn't exist, build one.
if ( ! -x $blddir/cam ) then
cd $blddir || echo "cd $blddir failed" && exit 1
$cfgdir/configure -hgrid 1.9x2.5 -fc mpif90 -fc_type pgi -ntasks $ntasks -cam_exedir $rundir -cam_bld $blddir || echo "configure failed" && exit 1
echo "building CAM in $blddir ..."
rm -f Depends
gmake -j2 >&! MAKE.out || echo "CAM build failed: see $blddir/MAKE.out" && exit 1
endif
## Create the namelist
cd $rundir || echo "cd $rundir failed" && exit 1
$cfgdir/build-namelist -s -config $blddir/config_cache.xml -runtype $runtype -dir $rundir \
-namelist "&camexp stop_option='nmonths', stop_n=$stop_n, npr_yz = $nx,$ny,$ny,$nx restart_option='monthly' \
bndtvs = '.......nc' \ #如果不是annual cycle的SST,自己加过异常的海温路径。如果是气候态的海温强迫,则可删掉该行。
/" || echo "build-namelist failed" && exit 1
echo "running CAM in $rundir"
rm cam.log || echo "remove the cam.log"
cp .../submitjob.sh ./
qsub submitjob.sh
exit 0
|
|