wrfout文件查看

小温馨岁月

将输出的wrfout文件后面加了nc后，变成了nc文件，之后用ncdump -h **.nc来查看文件中的变量，内容如下：
variables:
char Times(Time, DateStrLen) ;
float XLAT(Time, south_north, west_east) ;
  XLAT:FieldType = 104 ;
  XLAT:MemoryOrder = "XY " ;
  XLAT:description = "LATITUDE, SOUTH IS NEGATIVE" ;
  XLAT:units = "degree_north" ;
  XLAT:stagger = "" ;
  XLAT:coordinates = "XLONG XLAT" ;
float XLONG(Time, south_north, west_east) ;
  XLONG:FieldType = 104 ;
  XLONG:MemoryOrder = "XY " ;
  XLONG:description = "LONGITUDE, WEST IS NEGATIVE" ;
  XLONG:units = "degree_east" ;
  XLONG:stagger = "" ;
  XLONG:coordinates = "XLONG XLAT" ;
float LU_INDEX(Time, south_north, west_east) ;
  LU_INDEX:FieldType = 104 ;
  LU_INDEX:MemoryOrder = "XY " ;
  LU_INDEX:description = "LAND USE CATEGORY" ;
  LU_INDEX:units = "" ;
  LU_INDEX:stagger = "" ;
  LU_INDEX:coordinates = "XLONG XLAT XTIME" ;
float ZNU(Time, bottom_top) ;
  ZNU:FieldType = 104 ;
  ZNU:MemoryOrder = "Z  " ;
  ZNU:description = "eta values on half (mass) levels" ;
  ZNU:units = "" ;
  ZNU:stagger = "" ;
float ZNW(Time, bottom_top_stag) ;
  ZNW:FieldType = 104 ;
  ZNW:MemoryOrder = "Z  " ;
  ZNW:description = "eta values on full (w) levels" ;
  ZNW:units = "" ;
  ZNW:stagger = "Z" ;
float ZS(Time, soil_layers_stag) ;
  ZS:FieldType = 104 ;
  ZS:MemoryOrder = "Z  " ;
  ZS:description = "DEPTHS OF CENTERS OF SOIL LAYERS" ;
  ZS:units = "m" ;
  ZS:stagger = "Z" ;
float DZS(Time, soil_layers_stag) ;
  DZS:FieldType = 104 ;
  DZS:MemoryOrder = "Z  " ;
  DZS:description = "THICKNESSES OF SOIL LAYERS" ;
  DZS:units = "m" ;
  DZS:stagger = "Z" ;
float VAR_SSO(Time, south_north, west_east) ;
  VAR_SSO:FieldType = 104 ;
  VAR_SSO:MemoryOrder = "XY " ;
  VAR_SSO:description = "variance of subgrid-scale orography" ;
  VAR_SSO:units = "m2" ;
  VAR_SSO:stagger = "" ;
  VAR_SSO:coordinates = "XLONG XLAT XTIME" ;
float U(Time, bottom_top, south_north, west_east_stag) ;
  U:FieldType = 104 ;
  U:MemoryOrder = "XYZ" ;
  U:description = "x-wind component" ;
  U:units = "m s-1" ;
  U:stagger = "X" ;
  U:coordinates = "XLONG_U XLAT_U XTIME" ;
float V(Time, bottom_top, south_north_stag, west_east) ;
  V:FieldType = 104 ;
  V:MemoryOrder = "XYZ" ;
  V:description = "y-wind component" ;
  V:units = "m s-1" ;
  V:stagger = "Y" ;
  V:coordinates = "XLONG_V XLAT_V XTIME" ;
float W(Time, bottom_top_stag, south_north, west_east) ;
  W:FieldType = 104 ;
  W:MemoryOrder = "XYZ" ;
  W:description = "z-wind component" ;
  W:units = "m s-1" ;
  W:stagger = "Z" ;
  W:coordinates = "XLONG XLAT XTIME" ;
float PH(Time, bottom_top_stag, south_north, west_east) ;
  PH:FieldType = 104 ;
  PH:MemoryOrder = "XYZ" ;
  PH:description = "perturbation geopotential" ;
  PH:units = "m2 s-2" ;
  PH:stagger = "Z" ;
  PH:coordinates = "XLONG XLAT XTIME" ;
float PHB(Time, bottom_top_stag, south_north, west_east) ;
  PHB:FieldType = 104 ;
  PHB:MemoryOrder = "XYZ" ;
  PHB:description = "base-state geopotential" ;
  PHB:units = "m2 s-2" ;
  PHB:stagger = "Z" ;
  PHB:coordinates = "XLONG XLAT XTIME" ;
float T(Time, bottom_top, south_north, west_east) ;
  T:FieldType = 104 ;
  T:MemoryOrder = "XYZ" ;
  T:description = "perturbation potential temperature (theta-t0)" ;
  T:units = "K" ;
  T:stagger = "" ;
  T:coordinates = "XLONG XLAT XTIME" ;
float HFX_FORCE(Time) ;
  HFX_FORCE:FieldType = 104 ;
  HFX_FORCE:MemoryOrder = "0  " ;
  HFX_FORCE:description = "SCM ideal surface sensible heat flux" ;
  HFX_FORCE:units = "W m-2" ;
  HFX_FORCE:stagger = "" ;
float LH_FORCE(Time) ;
  LH_FORCE:FieldType = 104 ;
  LH_FORCE:MemoryOrder = "0  " ;
  LH_FORCE:description = "SCM ideal surface latent heat flux" ;
  LH_FORCE:units = "W m-2" ;
  LH_FORCE:stagger = "" ;
float TSK_FORCE(Time) ;
  TSK_FORCE:FieldType = 104 ;
  TSK_FORCE:MemoryOrder = "0  " ;
  TSK_FORCE:description = "SCM ideal surface skin temperature" ;
  TSK_FORCE:units = "W m-2" ;
  TSK_FORCE:stagger = "" ;
float HFX_FORCE_TEND(Time) ;
  HFX_FORCE_TEND:FieldType = 104 ;
  HFX_FORCE_TEND:MemoryOrder = "0  " ;
  HFX_FORCE_TEND:description = "SCM ideal surface sensible heat flux tendency" ;
  HFX_FORCE_TEND:units = "W m-2 s-1" ;
  HFX_FORCE_TEND:stagger = "" ;
float LH_FORCE_TEND(Time) ;
  LH_FORCE_TEND:FieldType = 104 ;
  LH_FORCE_TEND:MemoryOrder = "0  " ;
  LH_FORCE_TEND:description = "SCM ideal surface latent heat flux tendency" ;
  LH_FORCE_TEND:units = "W m-2 s-1" ;
  LH_FORCE_TEND:stagger = "" ;
float TSK_FORCE_TEND(Time) ;
  TSK_FORCE_TEND:FieldType = 104 ;
  TSK_FORCE_TEND:MemoryOrder = "0  " ;
  TSK_FORCE_TEND:description = "SCM ideal surface skin temperature tendency" ;
  TSK_FORCE_TEND:units = "W m-2 s-1" ;
  TSK_FORCE_TEND:stagger = "" ;
float MU(Time, south_north, west_east) ;
  MU:FieldType = 104 ;
  MU:MemoryOrder = "XY " ;
  MU:description = "perturbation dry air mass in column" ;
  MU:units = "Pa" ;
  MU:stagger = "" ;
  MU:coordinates = "XLONG XLAT XTIME" ;
float MUB(Time, south_north, west_east) ;
  MUB:FieldType = 104 ;
  MUB:MemoryOrder = "XY " ;
  MUB:description = "base state dry air mass in column" ;
  MUB:units = "Pa" ;
  MUB:stagger = "" ;
  MUB:coordinates = "XLONG XLAT XTIME" ;
float NEST_POS(Time, south_north, west_east) ;
  NEST_POS:FieldType = 104 ;
  NEST_POS:MemoryOrder = "XY " ;
  NEST_POS:description = "-" ;
  NEST_POS:units = "-" ;
  NEST_POS:stagger = "" ;
  NEST_POS:coordinates = "XLONG XLAT XTIME" ;
float P(Time, bottom_top, south_north, west_east) ;
  P:FieldType = 104 ;
  P:MemoryOrder = "XYZ" ;
  P:description = "perturbation pressure" ;
  P:units = "Pa" ;
  P:stagger = "" ;
  P:coordinates = "XLONG XLAT XTIME" ;
float PB(Time, bottom_top, south_north, west_east) ;
  PB:FieldType = 104 ;
  PB:MemoryOrder = "XYZ" ;
  PB:description = "BASE STATE PRESSURE" ;
  PB:units = "Pa" ;
  PB:stagger = "" ;
  PB:coordinates = "XLONG XLAT XTIME" ;
float FNM(Time, bottom_top) ;
  FNM:FieldType = 104 ;
  FNM:MemoryOrder = "Z  " ;
  FNM:description = "upper weight for vertical stretching" ;
  FNM:units = "" ;
  FNM:stagger = "" ;
float FNP(Time, bottom_top) ;
  FNP:FieldType = 104 ;
  FNP:MemoryOrder = "Z  " ;
  FNP:description = "lower weight for vertical stretching" ;
  FNP:units = "" ;
  FNP:stagger = "" ;
float RDNW(Time, bottom_top) ;
  RDNW:FieldType = 104 ;
  RDNW:MemoryOrder = "Z  " ;
  RDNW:description = "inverse d(eta) values between full (w) levels" ;
  RDNW:units = "" ;
  RDNW:stagger = "" ;
float RDN(Time, bottom_top) ;
  RDN:FieldType = 104 ;
  RDN:MemoryOrder = "Z  " ;
  RDN:description = "inverse d(eta) values between half (mass) levels" ;
  RDN:units = "" ;
  RDN:stagger = "" ;
float DNW(Time, bottom_top) ;
  DNW:FieldType = 104 ;
  DNW:MemoryOrder = "Z  " ;
  DNW:description = "d(eta) values between full (w) levels" ;
  DNW:units = "" ;
  DNW:stagger = "" ;
float DN(Time, bottom_top) ;
  DN:FieldType = 104 ;
  DN:MemoryOrder = "Z  " ;
  DN:description = "d(eta) values between half (mass) levels" ;
  DN:units = "" ;
  DN:stagger = "" ;
float CFN(Time) ;
  CFN:FieldType = 104 ;
  CFN:MemoryOrder = "0  " ;
  CFN:description = "extrapolation constant" ;
  CFN:units = "" ;
  CFN:stagger = "" ;
float CFN1(Time) ;
  CFN1:FieldType = 104 ;
  CFN1:MemoryOrder = "0  " ;
  CFN1:description = "extrapolation constant" ;
  CFN1:units = "" ;
  CFN1:stagger = "" ;
int THIS_IS_AN_IDEAL_RUN(Time) ;
  THIS_IS_AN_IDEAL_RUN:FieldType = 106 ;
  THIS_IS_AN_IDEAL_RUN:MemoryOrder = "0  " ;
  THIS_IS_AN_IDEAL_RUN:description = "T/F flag: this is an ARW ideal simulation" ;
  THIS_IS_AN_IDEAL_RUN:units = "-" ;
  THIS_IS_AN_IDEAL_RUN:stagger = "" ;
float P_HYD(Time, bottom_top, south_north, west_east) ;
  P_HYD:FieldType = 104 ;
  P_HYD:MemoryOrder = "XYZ" ;
  P_HYD:description = "hydrostatic pressure" ;
  P_HYD:units = "Pa" ;
  P_HYD:stagger = "" ;
  P_HYD:coordinates = "XLONG XLAT XTIME" ;
float Q2(Time, south_north, west_east) ;
  Q2:FieldType = 104 ;
  Q2:MemoryOrder = "XY " ;
  Q2:description = "QV at 2 M" ;
  Q2:units = "kg kg-1" ;
  Q2:stagger = "" ;
  Q2:coordinates = "XLONG XLAT XTIME" ;
float T2(Time, south_north, west_east) ;
  T2:FieldType = 104 ;
  T2:MemoryOrder = "XY " ;
  T2:description = "TEMP at 2 M" ;
  T2:units = "K" ;
  T2:stagger = "" ;
  T2:coordinates = "XLONG XLAT XTIME" ;
float TH2(Time, south_north, west_east) ;
  TH2:FieldType = 104 ;
  TH2:MemoryOrder = "XY " ;
  TH2:description = "POT TEMP at 2 M" ;
  TH2:units = "K" ;
  TH2:stagger = "" ;
  TH2:coordinates = "XLONG XLAT XTIME" ;
float PSFC(Time, south_north, west_east) ;
  PSFC:FieldType = 104 ;
  PSFC:MemoryOrder = "XY " ;
  PSFC:description = "SFC PRESSURE" ;
  PSFC:units = "Pa" ;
  PSFC:stagger = "" ;
  PSFC:coordinates = "XLONG XLAT XTIME" ;
float U10(Time, south_north, west_east) ;
  U10:FieldType = 104 ;
  U10:MemoryOrder = "XY " ;
  U10:description = "U at 10 M" ;
  U10:units = "m s-1" ;
  U10:stagger = "" ;
  U10:coordinates = "XLONG XLAT XTIME" ;
float V10(Time, south_north, west_east) ;
  V10:FieldType = 104 ;
  V10:MemoryOrder = "XY " ;
  V10:description = "V at 10 M" ;
  V10:units = "m s-1" ;
  V10:stagger = "" ;
  V10:coordinates = "XLONG XLAT XTIME" ;
float RDX(Time) ;
  RDX:FieldType = 104 ;
  RDX:MemoryOrder = "0  " ;
  RDX:description = "INVERSE X GRID LENGTH" ;
  RDX:units = "" ;
  RDX:stagger = "" ;
float RDY(Time) ;
  RDY:FieldType = 104 ;
  RDY:MemoryOrder = "0  " ;
  RDY:description = "INVERSE Y GRID LENGTH" ;
  RDY:units = "" ;
  RDY:stagger = "" ;
float RESM(Time) ;
  RESM:FieldType = 104 ;
  RESM:MemoryOrder = "0  " ;
  RESM:description = "TIME WEIGHT CONSTANT FOR SMALL STEPS" ;
  RESM:units = "" ;
  RESM:stagger = "" ;
float ZETATOP(Time) ;
  ZETATOP:FieldType = 104 ;
  ZETATOP:MemoryOrder = "0  " ;
  ZETATOP:description = "ZETA AT MODEL TOP" ;
  ZETATOP:units = "" ;
  ZETATOP:stagger = "" ;
float CF1(Time) ;
  CF1:FieldType = 104 ;
  CF1:MemoryOrder = "0  " ;
  CF1:description = "2nd order extrapolation constant" ;
  CF1:units = "" ;
  CF1:stagger = "" ;
float CF2(Time) ;
  CF2:FieldType = 104 ;
  CF2:MemoryOrder = "0  " ;
  CF2:description = "2nd order extrapolation constant" ;
  CF2:units = "" ;
  CF2:stagger = "" ;
float CF3(Time) ;
  CF3:FieldType = 104 ;
  CF3:MemoryOrder = "0  " ;
  CF3:description = "2nd order extrapolation constant" ;
  CF3:units = "" ;
  CF3:stagger = "" ;
int ITIMESTEP(Time) ;
  ITIMESTEP:FieldType = 106 ;
  ITIMESTEP:MemoryOrder = "0  " ;
  ITIMESTEP:description = "" ;
  ITIMESTEP:units = "" ;
  ITIMESTEP:stagger = "" ;
float XTIME(Time) ;
  XTIME:FieldType = 104 ;
  XTIME:MemoryOrder = "0  " ;
  XTIME:description = "minutes since 2010-01-01 00:00:00" ;
  XTIME:units = "minutes since 2010-01-01 00:00:00" ;
  XTIME:stagger = "" ;
float QVAPOR(Time, bottom_top, south_north, west_east) ;
  QVAPOR:FieldType = 104 ;
  QVAPOR:MemoryOrder = "XYZ" ;
  QVAPOR:description = "Water vapor mixing ratio" ;
  QVAPOR:units = "kg kg-1" ;
  QVAPOR:stagger = "" ;
  QVAPOR:coordinates = "XLONG XLAT XTIME" ;
float QCLOUD(Time, bottom_top, south_north, west_east) ;
  QCLOUD:FieldType = 104 ;
  QCLOUD:MemoryOrder = "XYZ" ;
  QCLOUD:description = "Cloud water mixing ratio" ;
  QCLOUD:units = "kg kg-1" ;
  QCLOUD:stagger = "" ;
  QCLOUD:coordinates = "XLONG XLAT XTIME" ;
float QRAIN(Time, bottom_top, south_north, west_east) ;
  QRAIN:FieldType = 104 ;
  QRAIN:MemoryOrder = "XYZ" ;
  QRAIN:description = "Rain water mixing ratio" ;
  QRAIN:units = "kg kg-1" ;
  QRAIN:stagger = "" ;
  QRAIN:coordinates = "XLONG XLAT XTIME" ;
float SHDMAX(Time, south_north, west_east) ;
  SHDMAX:FieldType = 104 ;
  SHDMAX:MemoryOrder = "XY " ;
  SHDMAX:description = "ANNUAL MAX VEG FRACTION" ;
  SHDMAX:units = "" ;
  SHDMAX:stagger = "" ;
  SHDMAX:coordinates = "XLONG XLAT XTIME" ;
float SHDMIN(Time, south_north, west_east) ;
  SHDMIN:FieldType = 104 ;
  SHDMIN:MemoryOrder = "XY " ;
  SHDMIN:description = "ANNUAL MIN VEG FRACTION" ;
  SHDMIN:units = "" ;
  SHDMIN:stagger = "" ;
  SHDMIN:coordinates = "XLONG XLAT XTIME" ;
float SNOALB(Time, south_north, west_east) ;
  SNOALB:FieldType = 104 ;
  SNOALB:MemoryOrder = "XY " ;
  SNOALB:description = "ANNUAL MAX SNOW ALBEDO IN FRACTION" ;
  SNOALB:units = "" ;
  SNOALB:stagger = "" ;
  SNOALB:coordinates = "XLONG XLAT XTIME" ;
float TSLB(Time, soil_layers_stag, south_north, west_east) ;
  TSLB:FieldType = 104 ;
  TSLB:MemoryOrder = "XYZ" ;
  TSLB:description = "SOIL TEMPERATURE" ;
  TSLB:units = "K" ;
  TSLB:stagger = "Z" ;
  TSLB:coordinates = "XLONG XLAT XTIME" ;
float SMOIS(Time, soil_layers_stag, south_north, west_east) ;
  SMOIS:FieldType = 104 ;
  SMOIS:MemoryOrder = "XYZ" ;
  SMOIS:description = "SOIL MOISTURE" ;
  SMOIS:units = "m3 m-3" ;
  SMOIS:stagger = "Z" ;
  SMOIS:coordinates = "XLONG XLAT XTIME" ;
float SH2O(Time, soil_layers_stag, south_north, west_east) ;
  SH2O:FieldType = 104 ;
  SH2O:MemoryOrder = "XYZ" ;
  SH2O:description = "SOIL LIQUID WATER" ;
  SH2O:units = "m3 m-3" ;
  SH2O:stagger = "Z" ;
  SH2O:coordinates = "XLONG XLAT XTIME" ;
float SEAICE(Time, south_north, west_east) ;
  SEAICE:FieldType = 104 ;
  SEAICE:MemoryOrder = "XY " ;
  SEAICE:description = "SEA ICE FLAG" ;
  SEAICE:units = "" ;
  SEAICE:stagger = "" ;
  SEAICE:coordinates = "XLONG XLAT XTIME" ;
float XICEM(Time, south_north, west_east) ;
  XICEM:FieldType = 104 ;
  XICEM:MemoryOrder = "XY " ;
  XICEM:description = "SEA ICE FLAG (PREVIOUS STEP)" ;
  XICEM:units = "" ;
  XICEM:stagger = "" ;
  XICEM:coordinates = "XLONG XLAT XTIME" ;
float SFROFF(Time, south_north, west_east) ;
  SFROFF:FieldType = 104 ;
  SFROFF:MemoryOrder = "XY " ;
  SFROFF:description = "SURFACE RUNOFF" ;
  SFROFF:units = "mm" ;
  SFROFF:stagger = "" ;
  SFROFF:coordinates = "XLONG XLAT XTIME" ;
float UDROFF(Time, south_north, west_east) ;
  UDROFF:FieldType = 104 ;
  UDROFF:MemoryOrder = "XY " ;
  UDROFF:description = "UNDERGROUND RUNOFF" ;
  UDROFF:units = "mm" ;
  UDROFF:stagger = "" ;
  UDROFF:coordinates = "XLONG XLAT XTIME" ;
int IVGTYP(Time, south_north, west_east) ;
  IVGTYP:FieldType = 106 ;
  IVGTYP:MemoryOrder = "XY " ;
  IVGTYP:description = "DOMINANT VEGETATION CATEGORY" ;
  IVGTYP:units = "" ;
  IVGTYP:stagger = "" ;
  IVGTYP:coordinates = "XLONG XLAT XTIME" ;
int ISLTYP(Time, south_north, west_east) ;
  ISLTYP:FieldType = 106 ;
  ISLTYP:MemoryOrder = "XY " ;
  ISLTYP:description = "DOMINANT SOIL CATEGORY" ;
  ISLTYP:units = "" ;
  ISLTYP:stagger = "" ;
  ISLTYP:coordinates = "XLONG XLAT XTIME" ;
float VEGFRA(Time, south_north, west_east) ;
  VEGFRA:FieldType = 104 ;
  VEGFRA:MemoryOrder = "XY " ;
  VEGFRA:description = "VEGETATION FRACTION" ;
  VEGFRA:units = "" ;
  VEGFRA:stagger = "" ;
  VEGFRA:coordinates = "XLONG XLAT XTIME" ;
float GRDFLX(Time, south_north, west_east) ;
  GRDFLX:FieldType = 104 ;
  GRDFLX:MemoryOrder = "XY " ;
  GRDFLX:description = "GROUND HEAT FLUX" ;
  GRDFLX:units = "W m-2" ;
  GRDFLX:stagger = "" ;
  GRDFLX:coordinates = "XLONG XLAT XTIME" ;
float ACGRDFLX(Time, south_north, west_east) ;
  ACGRDFLX:FieldType = 104 ;
  ACGRDFLX:MemoryOrder = "XY " ;
  ACGRDFLX:description = "ACCUMULATED GROUND HEAT FLUX" ;
  ACGRDFLX:units = "J m-2" ;
  ACGRDFLX:stagger = "" ;
  ACGRDFLX:coordinates = "XLONG XLAT XTIME" ;
float ACSNOM(Time, south_north, west_east) ;
  ACSNOM:FieldType = 104 ;
  ACSNOM:MemoryOrder = "XY " ;
  ACSNOM:description = "ACCUMULATED MELTED SNOW" ;
  ACSNOM:units = "kg m-2" ;
  ACSNOM:stagger = "" ;
  ACSNOM:coordinates = "XLONG XLAT XTIME" ;
float SNOW(Time, south_north, west_east) ;
  SNOW:FieldType = 104 ;
  SNOW:MemoryOrder = "XY " ;
  SNOW:description = "SNOW WATER EQUIVALENT" ;
  SNOW:units = "kg m-2" ;
  SNOW:stagger = "" ;
  SNOW:coordinates = "XLONG XLAT XTIME" ;
float SNOWH(Time, south_north, west_east) ;
  SNOWH:FieldType = 104 ;
  SNOWH:MemoryOrder = "XY " ;
  SNOWH:description = "PHYSICAL SNOW DEPTH" ;
  SNOWH:units = "m" ;
  SNOWH:stagger = "" ;
  SNOWH:coordinates = "XLONG XLAT XTIME" ;
float CANWAT(Time, south_north, west_east) ;
  CANWAT:FieldType = 104 ;
  CANWAT:MemoryOrder = "XY " ;
  CANWAT:description = "CANOPY WATER" ;
  CANWAT:units = "kg m-2" ;
  CANWAT:stagger = "" ;
  CANWAT:coordinates = "XLONG XLAT XTIME" ;
float SSTSK(Time, south_north, west_east) ;
  SSTSK:FieldType = 104 ;
  SSTSK:MemoryOrder = "XY " ;
  SSTSK:description = "SKIN SEA SURFACE TEMPERATURE" ;
  SSTSK:units = "K" ;
  SSTSK:stagger = "" ;
  SSTSK:coordinates = "XLONG XLAT XTIME" ;
float COSZEN(Time, south_north, west_east) ;
  COSZEN:FieldType = 104 ;
  COSZEN:MemoryOrder = "XY " ;
  COSZEN:description = "COS of SOLAR ZENITH ANGLE" ;
  COSZEN:units = "dimensionless" ;
  COSZEN:stagger = "" ;
  COSZEN:coordinates = "XLONG XLAT XTIME" ;
float LAI(Time, south_north, west_east) ;
  LAI:FieldType = 104 ;
  LAI:MemoryOrder = "XY " ;
  LAI:description = "LEAF AREA INDEX" ;
  LAI:units = "m-2/m-2" ;
  LAI:stagger = "" ;
  LAI:coordinates = "XLONG XLAT XTIME" ;
float VAR(Time, south_north, west_east) ;
  VAR:FieldType = 104 ;
  VAR:MemoryOrder = "XY " ;
  VAR:description = "OROGRAPHIC VARIANCE" ;
  VAR:units = "" ;
  VAR:stagger = "" ;
  VAR:coordinates = "XLONG XLAT XTIME" ;
float MAPFAC_M(Time, south_north, west_east) ;
  MAPFAC_M:FieldType = 104 ;
  MAPFAC_M:MemoryOrder = "XY " ;
  MAPFAC_M:description = "Map scale factor on mass grid" ;
  MAPFAC_M:units = "" ;
  MAPFAC_M:stagger = "" ;
  MAPFAC_M:coordinates = "XLONG XLAT XTIME" ;
float MAPFAC_U(Time, south_north, west_east_stag) ;
  MAPFAC_U:FieldType = 104 ;
  MAPFAC_U:MemoryOrder = "XY " ;
  MAPFAC_U:description = "Map scale factor on u-grid" ;
  MAPFAC_U:units = "" ;
  MAPFAC_U:stagger = "X" ;
  MAPFAC_U:coordinates = "XLONG_U XLAT_U XTIME" ;
float MAPFAC_V(Time, south_north_stag, west_east) ;
  MAPFAC_V:FieldType = 104 ;
  MAPFAC_V:MemoryOrder = "XY " ;
  MAPFAC_V:description = "Map scale factor on v-grid" ;
  MAPFAC_V:units = "" ;
  MAPFAC_V:stagger = "Y" ;
  MAPFAC_V:coordinates = "XLONG_V XLAT_V XTIME" ;
float MAPFAC_MX(Time, south_north, west_east) ;
  MAPFAC_MX:FieldType = 104 ;
  MAPFAC_MX:MemoryOrder = "XY " ;
  MAPFAC_MX:description = "Map scale factor on mass grid, x direction" ;
  MAPFAC_MX:units = "" ;
  MAPFAC_MX:stagger = "" ;
  MAPFAC_MX:coordinates = "XLONG XLAT XTIME" ;
float MAPFAC_MY(Time, south_north, west_east) ;
  MAPFAC_MY:FieldType = 104 ;
  MAPFAC_MY:MemoryOrder = "XY " ;
  MAPFAC_MY:description = "Map scale factor on mass grid, y direction" ;
  MAPFAC_MY:units = "" ;
  MAPFAC_MY:stagger = "" ;
  MAPFAC_MY:coordinates = "XLONG XLAT XTIME" ;
float MAPFAC_UX(Time, south_north, west_east_stag) ;
  MAPFAC_UX:FieldType = 104 ;
  MAPFAC_UX:MemoryOrder = "XY " ;
  MAPFAC_UX:description = "Map scale factor on u-grid, x direction" ;
  MAPFAC_UX:units = "" ;
  MAPFAC_UX:stagger = "X" ;
  MAPFAC_UX:coordinates = "XLONG_U XLAT_U XTIME" ;
float MAPFAC_UY(Time, south_north, west_east_stag) ;
  MAPFAC_UY:FieldType = 104 ;
  MAPFAC_UY:MemoryOrder = "XY " ;
  MAPFAC_UY:description = "Map scale factor on u-grid, y direction" ;
  MAPFAC_UY:units = "" ;
  MAPFAC_UY:stagger = "X" ;
  MAPFAC_UY:coordinates = "XLONG_U XLAT_U XTIME" ;
float MAPFAC_VX(Time, south_north_stag, west_east) ;
  MAPFAC_VX:FieldType = 104 ;
  MAPFAC_VX:MemoryOrder = "XY " ;
  MAPFAC_VX:description = "Map scale factor on v-grid, x direction" ;
  MAPFAC_VX:units = "" ;
  MAPFAC_VX:stagger = "Y" ;
  MAPFAC_VX:coordinates = "XLONG_V XLAT_V XTIME" ;
float MF_VX_INV(Time, south_north_stag, west_east) ;
  MF_VX_INV:FieldType = 104 ;
  MF_VX_INV:MemoryOrder = "XY " ;
  MF_VX_INV:description = "Inverse map scale factor on v-grid, x direction" ;
  MF_VX_INV:units = "" ;
  MF_VX_INV:stagger = "Y" ;
  MF_VX_INV:coordinates = "XLONG_V XLAT_V XTIME" ;
float MAPFAC_VY(Time, south_north_stag, west_east) ;
  MAPFAC_VY:FieldType = 104 ;
  MAPFAC_VY:MemoryOrder = "XY " ;
  MAPFAC_VY:description = "Map scale factor on v-grid, y direction" ;
  MAPFAC_VY:units = "" ;
  MAPFAC_VY:stagger = "Y" ;
  MAPFAC_VY:coordinates = "XLONG_V XLAT_V XTIME" ;
float F(Time, south_north, west_east) ;
  F:FieldType = 104 ;
  F:MemoryOrder = "XY " ;
  F:description = "Coriolis sine latitude term" ;
  F:units = "s-1" ;
  F:stagger = "" ;
  F:coordinates = "XLONG XLAT XTIME" ;
float E(Time, south_north, west_east) ;
  E:FieldType = 104 ;
  E:MemoryOrder = "XY " ;
  E:description = "Coriolis cosine latitude term" ;
  E:units = "s-1" ;
  E:stagger = "" ;
  E:coordinates = "XLONG XLAT XTIME" ;
float SINALPHA(Time, south_north, west_east) ;
  SINALPHA:FieldType = 104 ;
  SINALPHA:MemoryOrder = "XY " ;
  SINALPHA:description = "Local sine of map rotation" ;
  SINALPHA:units = "" ;
  SINALPHA:stagger = "" ;
  SINALPHA:coordinates = "XLONG XLAT XTIME" ;
float COSALPHA(Time, south_north, west_east) ;
  COSALPHA:FieldType = 104 ;
  COSALPHA:MemoryOrder = "XY " ;
  COSALPHA:description = "Local cosine of map rotation" ;
  COSALPHA:units = "" ;
  COSALPHA:stagger = "" ;
  COSALPHA:coordinates = "XLONG XLAT XTIME" ;
float HGT(Time, south_north, west_east) ;
  HGT:FieldType = 104 ;
  HGT:MemoryOrder = "XY " ;
  HGT:description = "Terrain Height" ;
  HGT:units = "m" ;
  HGT:stagger = "" ;
  HGT:coordinates = "XLONG XLAT XTIME" ;
float TSK(Time, south_north, west_east) ;
  TSK:FieldType = 104 ;
  TSK:MemoryOrder = "XY " ;
  TSK:description = "SURFACE SKIN TEMPERATURE" ;
  TSK:units = "K" ;
  TSK:stagger = "" ;
  TSK:coordinates = "XLONG XLAT XTIME" ;
float P_TOP(Time) ;
  P_TOP:FieldType = 104 ;
  P_TOP:MemoryOrder = "0  " ;
  P_TOP:description = "PRESSURE TOP OF THE MODEL" ;
  P_TOP:units = "Pa" ;
  P_TOP:stagger = "" ;
float T00(Time) ;
  T00:FieldType = 104 ;
  T00:MemoryOrder = "0  " ;
  T00:description = "BASE STATE TEMPERATURE" ;
  T00:units = "K" ;
  T00:stagger = "" ;
float P00(Time) ;
  P00:FieldType = 104 ;
  P00:MemoryOrder = "0  " ;
  P00:description = "BASE STATE PRESURE" ;
  P00:units = "Pa" ;
  P00:stagger = "" ;
float TLP(Time) ;
  TLP:FieldType = 104 ;
  TLP:MemoryOrder = "0  " ;
  TLP:description = "BASE STATE LAPSE RATE" ;
  TLP:units = "" ;
  TLP:stagger = "" ;
float TISO(Time) ;
  TISO:FieldType = 104 ;
  TISO:MemoryOrder = "0  " ;
  TISO:description = "TEMP AT WHICH THE BASE T TURNS CONST" ;
  TISO:units = "K" ;
  TISO:stagger = "" ;
float TLP_STRAT(Time) ;
  TLP_STRAT:FieldType = 104 ;
  TLP_STRAT:MemoryOrder = "0  " ;
  TLP_STRAT:description = "BASE STATE LAPSE RATE (DT/D(LN(P)) IN STRATOSPHERE" ;
  TLP_STRAT:units = "K" ;
  TLP_STRAT:stagger = "" ;
float P_STRAT(Time) ;
  P_STRAT:FieldType = 104 ;
  P_STRAT:MemoryOrder = "0  " ;
  P_STRAT:description = "BASE STATE PRESSURE AT BOTTOM OF STRATOSPHERE" ;
  P_STRAT:units = "Pa" ;
  P_STRAT:stagger = "" ;
float MAX_MSTFX(Time) ;
  MAX_MSTFX:FieldType = 104 ;
  MAX_MSTFX:MemoryOrder = "0  " ;
  MAX_MSTFX:description = "Max map factor in domain" ;
  MAX_MSTFX:units = "" ;
  MAX_MSTFX:stagger = "" ;
float MAX_MSTFY(Time) ;
  MAX_MSTFY:FieldType = 104 ;
  MAX_MSTFY:MemoryOrder = "0  " ;
  MAX_MSTFY:description = "Max map factor in domain" ;
  MAX_MSTFY:units = "" ;
  MAX_MSTFY:stagger = "" ;
float RAINC(Time, south_north, west_east) ;
  RAINC:FieldType = 104 ;
  RAINC:MemoryOrder = "XY " ;
  RAINC:description = "ACCUMULATED TOTAL CUMULUS PRECIPITATION" ;
  RAINC:units = "mm" ;
  RAINC:stagger = "" ;
  RAINC:coordinates = "XLONG XLAT XTIME" ;
float RAINSH(Time, south_north, west_east) ;
  RAINSH:FieldType = 104 ;
  RAINSH:MemoryOrder = "XY " ;
  RAINSH:description = "ACCUMULATED SHALLOW CUMULUS PRECIPITATION" ;
  RAINSH:units = "mm" ;
  RAINSH:stagger = "" ;
  RAINSH:coordinates = "XLONG XLAT XTIME" ;
float RAINNC(Time, south_north, west_east) ;
  RAINNC:FieldType = 104 ;
  RAINNC:MemoryOrder = "XY " ;
  RAINNC:description = "ACCUMULATED TOTAL GRID SCALE PRECIPITATION" ;
  RAINNC:units = "mm" ;
  RAINNC:stagger = "" ;
  RAINNC:coordinates = "XLONG XLAT XTIME" ;
float SNOWNC(Time, south_north, west_east) ;
  SNOWNC:FieldType = 104 ;
  SNOWNC:MemoryOrder = "XY " ;
  SNOWNC:description = "ACCUMULATED TOTAL GRID SCALE SNOW AND ICE" ;
  SNOWNC:units = "mm" ;
  SNOWNC:stagger = "" ;
  SNOWNC:coordinates = "XLONG XLAT XTIME" ;
float GRAUPELNC(Time, south_north, west_east) ;
  GRAUPELNC:FieldType = 104 ;
  GRAUPELNC:MemoryOrder = "XY " ;
  GRAUPELNC:description = "ACCUMULATED TOTAL GRID SCALE GRAUPEL" ;
  GRAUPELNC:units = "mm" ;
  GRAUPELNC:stagger = "" ;
  GRAUPELNC:coordinates = "XLONG XLAT XTIME" ;
float HAILNC(Time, south_north, west_east) ;
  HAILNC:FieldType = 104 ;
  HAILNC:MemoryOrder = "XY " ;
  HAILNC:description = "ACCUMULATED TOTAL GRID SCALE HAIL" ;
  HAILNC:units = "mm" ;
  HAILNC:stagger = "" ;
  HAILNC:coordinates = "XLONG XLAT XTIME" ;
float CLDFRA(Time, bottom_top, south_north, west_east) ;
  CLDFRA:FieldType = 104 ;
  CLDFRA:MemoryOrder = "XYZ" ;
  CLDFRA:description = "CLOUD FRACTION" ;
  CLDFRA:units = "" ;
  CLDFRA:stagger = "" ;
  CLDFRA:coordinates = "XLONG XLAT XTIME" ;
float SWDOWN(Time, south_north, west_east) ;
  SWDOWN:FieldType = 104 ;
  SWDOWN:MemoryOrder = "XY " ;
  SWDOWN:description = "DOWNWARD SHORT WAVE FLUX AT GROUND SURFACE" ;
  SWDOWN:units = "W m-2" ;
  SWDOWN:stagger = "" ;
  SWDOWN:coordinates = "XLONG XLAT XTIME" ;
float GLW(Time, south_north, west_east) ;
  GLW:FieldType = 104 ;
  GLW:MemoryOrder = "XY " ;
  GLW:description = "DOWNWARD LONG WAVE FLUX AT GROUND SURFACE" ;
  GLW:units = "W m-2" ;
  GLW:stagger = "" ;
  GLW:coordinates = "XLONG XLAT XTIME" ;
float SWNORM(Time, south_north, west_east) ;
  SWNORM:FieldType = 104 ;
  SWNORM:MemoryOrder = "XY " ;
  SWNORM:description = "NORMAL SHORT WAVE FLUX AT GROUND SURFACE (SLOPE-DEPENDENT)" ;
  SWNORM:units = "W m-2" ;
  SWNORM:stagger = "" ;
  SWNORM:coordinates = "XLONG XLAT XTIME" ;
float OLR(Time, south_north, west_east) ;
  OLR:FieldType = 104 ;
  OLR:MemoryOrder = "XY " ;
  OLR:description = "TOA OUTGOING LONG WAVE" ;
  OLR:units = "W m-2" ;
  OLR:stagger = "" ;
  OLR:coordinates = "XLONG XLAT XTIME" ;
float XLAT_U(Time, south_north, west_east_stag) ;
  XLAT_U:FieldType = 104 ;
  XLAT_U:MemoryOrder = "XY " ;
  XLAT_U:description = "LATITUDE, SOUTH IS NEGATIVE" ;
  XLAT_U:units = "degree_north" ;
  XLAT_U:stagger = "X" ;
  XLAT_U:coordinates = "XLONG_U XLAT_U" ;
float XLONG_U(Time, south_north, west_east_stag) ;
  XLONG_U:FieldType = 104 ;
  XLONG_U:MemoryOrder = "XY " ;
  XLONG_U:description = "LONGITUDE, WEST IS NEGATIVE" ;
  XLONG_U:units = "degree_east" ;
  XLONG_U:stagger = "X" ;
  XLONG_U:coordinates = "XLONG_U XLAT_U" ;
float XLAT_V(Time, south_north_stag, west_east) ;
  XLAT_V:FieldType = 104 ;
  XLAT_V:MemoryOrder = "XY " ;
  XLAT_V:description = "LATITUDE, SOUTH IS NEGATIVE" ;
  XLAT_V:units = "degree_north" ;
  XLAT_V:stagger = "Y" ;
  XLAT_V:coordinates = "XLONG_V XLAT_V" ;
float XLONG_V(Time, south_north_stag, west_east) ;
  XLONG_V:FieldType = 104 ;
  XLONG_V:MemoryOrder = "XY " ;
  XLONG_V:description = "LONGITUDE, WEST IS NEGATIVE" ;
  XLONG_V:units = "degree_east" ;
  XLONG_V:stagger = "Y" ;
  XLONG_V:coordinates = "XLONG_V XLAT_V" ;
float ALBEDO(Time, south_north, west_east) ;
  ALBEDO:FieldType = 104 ;
  ALBEDO:MemoryOrder = "XY " ;
  ALBEDO:description = "ALBEDO" ;
  ALBEDO:units = "-" ;
  ALBEDO:stagger = "" ;
  ALBEDO:coordinates = "XLONG XLAT XTIME" ;
float CLAT(Time, south_north, west_east) ;
  CLAT:FieldType = 104 ;
  CLAT:MemoryOrder = "XY " ;
  CLAT:description = "COMPUTATIONAL GRID LATITUDE, SOUTH IS NEGATIVE" ;
  CLAT:units = "degree_north" ;
  CLAT:stagger = "" ;
  CLAT:coordinates = "XLONG XLAT XTIME" ;
float ALBBCK(Time, south_north, west_east) ;
  ALBBCK:FieldType = 104 ;
  ALBBCK:MemoryOrder = "XY " ;
  ALBBCK:description = "BACKGROUND ALBEDO" ;
  ALBBCK:units = "" ;
  ALBBCK:stagger = "" ;
  ALBBCK:coordinates = "XLONG XLAT XTIME" ;
float EMISS(Time, south_north, west_east) ;
  EMISS:FieldType = 104 ;
  EMISS:MemoryOrder = "XY " ;
  EMISS:description = "SURFACE EMISSIVITY" ;
  EMISS:units = "" ;
  EMISS:stagger = "" ;
  EMISS:coordinates = "XLONG XLAT XTIME" ;
float NOAHRES(Time, south_north, west_east) ;
  NOAHRES:FieldType = 104 ;
  NOAHRES:MemoryOrder = "XY " ;
  NOAHRES:description = "RESIDUAL OF THE NOAH SURFACE ENERGY BUDGET" ;
  NOAHRES:units = "W m{-2}" ;
  NOAHRES:stagger = "" ;
  NOAHRES:coordinates = "XLONG XLAT XTIME" ;
float TMN(Time, south_north, west_east) ;
  TMN:FieldType = 104 ;
  TMN:MemoryOrder = "XY " ;
  TMN:description = "SOIL TEMPERATURE AT LOWER BOUNDARY" ;
  TMN:units = "K" ;
  TMN:stagger = "" ;
  TMN:coordinates = "XLONG XLAT XTIME" ;
float XLAND(Time, south_north, west_east) ;
  XLAND:FieldType = 104 ;
  XLAND:MemoryOrder = "XY " ;
  XLAND:description = "LAND MASK (1 FOR LAND, 2 FOR WATER)" ;
  XLAND:units = "" ;
  XLAND:stagger = "" ;
  XLAND:coordinates = "XLONG XLAT XTIME" ;
float UST(Time, south_north, west_east) ;
  UST:FieldType = 104 ;
  UST:MemoryOrder = "XY " ;
  UST:description = "U* IN SIMILARITY THEORY" ;
  UST:units = "m s-1" ;
  UST:stagger = "" ;
  UST:coordinates = "XLONG XLAT XTIME" ;
float PBLH(Time, south_north, west_east) ;
  PBLH:FieldType = 104 ;
  PBLH:MemoryOrder = "XY " ;
  PBLH:description = "PBL HEIGHT" ;
  PBLH:units = "m" ;
  PBLH:stagger = "" ;
  PBLH:coordinates = "XLONG XLAT XTIME" ;
float HFX(Time, south_north, west_east) ;
  HFX:FieldType = 104 ;
  HFX:MemoryOrder = "XY " ;
  HFX:description = "UPWARD HEAT FLUX AT THE SURFACE" ;
  HFX:units = "W m-2" ;
  HFX:stagger = "" ;
  HFX:coordinates = "XLONG XLAT XTIME" ;
float QFX(Time, south_north, west_east) ;
  QFX:FieldType = 104 ;
  QFX:MemoryOrder = "XY " ;
  QFX:description = "UPWARD MOISTURE FLUX AT THE SURFACE" ;
  QFX:units = "kg m-2 s-1" ;
  QFX:stagger = "" ;
  QFX:coordinates = "XLONG XLAT XTIME" ;
float LH(Time, south_north, west_east) ;
  LH:FieldType = 104 ;
  LH:MemoryOrder = "XY " ;
  LH:description = "LATENT HEAT FLUX AT THE SURFACE" ;
  LH:units = "W m-2" ;
  LH:stagger = "" ;
  LH:coordinates = "XLONG XLAT XTIME" ;
float ACHFX(Time, south_north, west_east) ;
  ACHFX:FieldType = 104 ;
  ACHFX:MemoryOrder = "XY " ;
  ACHFX:description = "ACCUMULATED UPWARD HEAT FLUX AT THE SURFACE" ;
  ACHFX:units = "J m-2" ;
  ACHFX:stagger = "" ;
  ACHFX:coordinates = "XLONG XLAT XTIME" ;
float ACLHF(Time, south_north, west_east) ;
  ACLHF:FieldType = 104 ;
  ACLHF:MemoryOrder = "XY " ;
  ACLHF:description = "ACCUMULATED UPWARD LATENT HEAT FLUX AT THE SURFACE" ;
  ACLHF:units = "J m-2" ;
  ACLHF:stagger = "" ;
  ACLHF:coordinates = "XLONG XLAT XTIME" ;
float SNOWC(Time, south_north, west_east) ;
  SNOWC:FieldType = 104 ;
  SNOWC:MemoryOrder = "XY " ;
  SNOWC:description = "FLAG INDICATING SNOW COVERAGE (1 FOR SNOW COVER)" ;
  SNOWC:units = "" ;
  SNOWC:stagger = "" ;
  SNOWC:coordinates = "XLONG XLAT XTIME" ;
float SR(Time, south_north, west_east) ;
  SR:FieldType = 104 ;
  SR:MemoryOrder = "XY " ;
  SR:description = "fraction of frozen precipitation" ;
  SR:units = "-" ;
  SR:stagger = "" ;
  SR:coordinates = "XLONG XLAT XTIME" ;
int SAVE_TOPO_FROM_REAL(Time) ;
  SAVE_TOPO_FROM_REAL:FieldType = 106 ;
  SAVE_TOPO_FROM_REAL:MemoryOrder = "0  " ;
  SAVE_TOPO_FROM_REAL:description = "1=original topo from real/0=topo modified by WRF" ;
  SAVE_TOPO_FROM_REAL:units = "flag" ;
  SAVE_TOPO_FROM_REAL:stagger = "" ;
int ISEEDARR_RAND_PERTURB(Time, bottom_top) ;
  ISEEDARR_RAND_PERTURB:FieldType = 106 ;
  ISEEDARR_RAND_PERTURB:MemoryOrder = "Z  " ;
  ISEEDARR_RAND_PERTURB:description = "Array to hold seed for restart, RAND_PERT" ;
  ISEEDARR_RAND_PERTURB:units = "" ;
  ISEEDARR_RAND_PERTURB:stagger = "" ;
int ISEEDARR_SPPT(Time, bottom_top) ;
  ISEEDARR_SPPT:FieldType = 106 ;
  ISEEDARR_SPPT:MemoryOrder = "Z  " ;
  ISEEDARR_SPPT:description = "Array to hold seed for restart, SPPT" ;
  ISEEDARR_SPPT:units = "" ;
  ISEEDARR_SPPT:stagger = "" ;
int ISEEDARR_SKEBS(Time, bottom_top) ;
  ISEEDARR_SKEBS:FieldType = 106 ;
  ISEEDARR_SKEBS:MemoryOrder = "Z  " ;
  ISEEDARR_SKEBS:description = "Array to hold seed for restart, SKEBS" ;
  ISEEDARR_SKEBS:units = "" ;
  ISEEDARR_SKEBS:stagger = "" ;
float LANDMASK(Time, south_north, west_east) ;
  LANDMASK:FieldType = 104 ;
  LANDMASK:MemoryOrder = "XY " ;
  LANDMASK:description = "LAND MASK (1 FOR LAND, 0 FOR WATER)" ;
  LANDMASK:units = "" ;
  LANDMASK:stagger = "" ;
  LANDMASK:coordinates = "XLONG XLAT XTIME" ;
float LAKEMASK(Time, south_north, west_east) ;
  LAKEMASK:FieldType = 104 ;
  LAKEMASK:MemoryOrder = "XY " ;
  LAKEMASK:description = "LAKE MASK (1 FOR LAKE, 0 FOR NON-LAKE)" ;
  LAKEMASK:units = "" ;
  LAKEMASK:stagger = "" ;
  LAKEMASK:coordinates = "XLONG XLAT XTIME" ;
float SST(Time, south_north, west_east) ;
  SST:FieldType = 104 ;
  SST:MemoryOrder = "XY " ;
  SST:description = "SEA SURFACE TEMPERATURE" ;
  SST:units = "K" ;
  SST:stagger = "" ;
  SST:coordinates = "XLONG XLAT XTIME" ;
float SST_INPUT(Time, south_north, west_east) ;
  SST_INPUT:FieldType = 104 ;
  SST_INPUT:MemoryOrder = "XY " ;
  SST_INPUT:description = "SEA SURFACE TEMPERATURE FROM WRFLOWINPUT FILE" ;
  SST_INPUT:units = "K" ;
  SST_INPUT:stagger = "" ;
  SST_INPUT:coordinates = "XLONG XLAT XTIME" ;


这些看不太懂，尤其是字段类型代表的是什么意思呢？我在里面找降水竟然找不到，这又是什么问题呢？请大神赐教

小温馨岁月

wrf.log内容如下：
Ntasks in X            1, ntasks in Y            1
Linear vertical interpolation is recommended with input vertical resolution this coarse, changing lagrange_order to 1
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain      2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
Need MYNN PBL for icloud_bl = 1, resetting to 0
--- NOTE: RRTMG radiation is not used, setting:  o3input=0 to avoid data pre-processing
--- NOTE: num_soil_layers has been set to      5
WRF V3.8.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde            1          71           1          61
ims,ime,jms,jme           -4          76          -4          66
ips,ipe,jps,jpe            1          71           1          61
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1,              100113396 bytes allocated
  med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain        1:    0.02090 elapsed seconds
Max map factor in domain 1 =  1.00. Scale the dt in the model accordingly.
INPUT LandUse = "MODIFIED_IGBP_MODIS_NOAH"
LANDUSE TYPE = "MODIFIED_IGBP_MODIS_NOAH" FOUND          33 CATEGORIES           2 SEASONS WATER CATEGORY =           17 SNOW CATEGORY =           15
因为没有报错，所以并未考虑是否这些会产生影响，还望各位也帮忙看看

andrewsoong

降水是RAINC和RAINNC

小温馨岁月

andrewsoong 发表于 2017-3-21 17:36
降水是RAINC和RAINNC

前辈，有一点很奇怪，我用的再分析数据进去降水是%，出来变成了mm，这个是正常现象吗？还有那个log文件里面的算不算错误呢？
因为我初次接触wrf，有点像无头苍蝇的学习，还好总是得到您的帮助，向您表示感谢！

能轩

降水是RAINC,RAINNC和RAINSH

打怪兽的奥特曼

我想请问下  我没有加嵌套网格时计算结果可以用matlab读取，但是用了嵌套网格后  嵌套网格的输出结果有8G左右 matlab无法读取 时因为文件太大了吗？

小温馨岁月

能轩 发表于 2017-3-21 20:04
降水是RAINC,RAINNC和RAINSH

感谢！  感谢！

小温馨岁月

打怪兽的奥特曼 发表于 2017-3-21 20:46
我想请问下  我没有加嵌套网格时计算结果可以用matlab读取，但是用了嵌套网格后  嵌套网格的输出结果有8G左 ...

没用过matlab，或许你可以咨询版主大大

鱼鱼鱼鱼

我想问个问题，我的wrfout输出的结果变量明显比官网上的少，V10、U10之类的都没有，请问这是怎么回事呢？

kylin

鱼鱼鱼鱼 发表于 2017-5-26 21:17
我想问个问题，我的wrfout输出的结果变量明显比官网上的少，V10、U10之类的都没有，请问这是怎么回事呢？

你贴的那些变量里有U10和V10的啊