安装lapack-3.5.0 出现make错误，求解决，谢谢

Choicloud

( cd INSTALL; make; ./testlsame; ./testslamch; ./testdlamch; \
./testsecond; ./testdsecnd; ./testieee; ./testversion )
make[1]: 进入目录“/usr/local/lapack-3.5.0/INSTALL”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/INSTALL”
  ASCII character set
  Tests completed
  Epsilon                      =    5.96046448E-08
  Safe minimum                 =    1.17549435E-38
  Base                         =    2.00000000   
  Precision                    =    1.19209290E-07
  Number of digits in mantissa =    24.0000000   
  Rounding mode                =    1.00000000   
  Minimum exponent             =   -125.000000   
  Underflow threshold          =    1.17549435E-38
  Largest exponent             =    128.000000   
  Overflow threshold           =    3.40282347E+38
  Reciprocal of safe minimum   =    8.50705917E+37
  Epsilon                      =    1.1102230246251565E-016
  Safe minimum                 =    2.2250738585072014E-308
  Base                         =    2.0000000000000000     
  Precision                    =    2.2204460492503131E-016
  Number of digits in mantissa =    53.000000000000000     
  Rounding mode                =    1.0000000000000000     
  Minimum exponent             =   -1021.0000000000000     
  Underflow threshold          =    2.2250738585072014E-308
  Largest exponent             =    1024.0000000000000     
  Overflow threshold           =    1.7976931348623157E+308
  Reciprocal of safe minimum   =    4.4942328371557898E+307
Time for  0.100E+09 SAXPY ops =  0.400E-05 seconds
SAXPY performance rate        =  0.250E+08 mflops
Including SECOND, time        =  0.147E-02 seconds
Average time for SECOND       =  0.293E-04 milliseconds
Equivalent floating point ops =  0.732E+06 ops
Time for  0.100E+09 DAXPY ops =   0.00     seconds
*** Warning:  Time for operations was less or equal than zero => timing in TESTING might be dubious
Including DSECND, time        =  0.292E-02 seconds
Average time for DSECND       =  0.583E-04 milliseconds
We are about to check whether infinity arithmetic
can be trusted.  If this test hangs, set
ILAENV = 0 for ISPEC = 10 in LAPACK/SRC/ilaenv.f

Infinity arithmetic performed as per the ieee spec.
However, this is not an exhaustive test and does not
guarantee that infinity arithmetic meets the ieee spec.

We are about to check whether NaN arithmetic
can be trusted.  If this test hangs, set
ILAENV = 0 for ISPEC = 11 in LAPACK/SRC/ilaenv.f

NaN arithmetic performed as per the ieee spec.
However, this is not an exhaustive test and does not
guarantee that NaN arithmetic meets the ieee spec.

LAPACK            3 .           5 .           0
( cd BLAS/SRC; make )
make[1]: 进入目录“/usr/local/lapack-3.5.0/BLAS/SRC”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/BLAS/SRC”
( cd SRC; make )
make[1]: 进入目录“/usr/local/lapack-3.5.0/SRC”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/SRC”
( cd TESTING/MATGEN; make )
make[1]: 进入目录“/usr/local/lapack-3.5.0/TESTING/MATGEN”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/TESTING/MATGEN”
( cd BLAS/TESTING; make -f Makeblat1 )
make[1]: 进入目录“/usr/local/lapack-3.5.0/BLAS/TESTING”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/BLAS/TESTING”
( cd BLAS; ./xblat1s > sblat1.out    ; \
           ./xblat1d > dblat1.out    ; \
           ./xblat1c > cblat1.out    ; \
           ./xblat1z > zblat1.out    )
( cd BLAS/TESTING; make -f Makeblat2 )
make[1]: 进入目录“/usr/local/lapack-3.5.0/BLAS/TESTING”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/BLAS/TESTING”
( cd BLAS; ./xblat2s < sblat2.in     ; \
           ./xblat2d < dblat2.in     ; \
           ./xblat2c < cblat2.in     ; \
           ./xblat2z < zblat2.in     )
( cd BLAS/TESTING; make -f Makeblat3 )
make[1]: 进入目录“/usr/local/lapack-3.5.0/BLAS/TESTING”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/usr/local/lapack-3.5.0/BLAS/TESTING”
( cd BLAS; ./xblat3s < sblat3.in     ; \
           ./xblat3d < dblat3.in     ; \
           ./xblat3c < cblat3.in     ; \
           ./xblat3z < zblat3.in     )
( cd TESTING ; make )
make[1]: 进入目录“/usr/local/lapack-3.5.0/TESTING”
LSE: Testing Constrained Linear Least Squares routines
./xeigtstz < lse.in > zlse.out 2>&1
/bin/sh: 行 1: 28875 段错误               (吐核)./xeigtstz < lse.in > zlse.out 2>&1
make[1]: *** [zlse.out] 错误 139
make[1]: 离开目录“/usr/local/lapack-3.5.0/TESTING”
make: *** [lapack_testing] 错误 2