- 积分
- 247
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2011-9-13
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
本帖最后由 liy72427 于 2017-6-22 17:44 编辑
本人模式小白一枚,以前在学校大型机上傻瓜的运行过wrf,现在离开学校想要运行模式只能自己安装linux系统,依靠度娘在笔记本上安装好centos7,看了许多帖子,主要参考chinagod,尽头的尽头,destroyer ,yuan/// ,知天易-未卜先知 等大侠的帖子安装了zlib,libpng,jasper,netcdf,编译WRF时选择 35. (dm+sm) GNU (gfortran/gcc) 然后选择1嵌套,结果在wrfcompile.log中出现如下错误:
Fortran compiler for the model source code:
which FC
which: no mpif90 in (/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/home/liy/.local/bin:/home/liy/bin)
Will use 'time' to report timing information
C compiler for the model source code:
which CC
which: no mpicc in (/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/home/liy/.local/bin:/home/liy/bin)
make: *** [configcheck] 错误 1
上面的问题解决了,编译WPS时又出现了新的问题,只能生成ungrid.exe,另外两个生成不了,错误信息如下:
致命错误: 无法打开模块文件‘netcdf.mod’读取,在(1)处:没有那个文件或目录
make[1]: [scan_input.o] 错误 1 (忽略)
致命错误: 无法打开模块文件‘scan_input.mod’读取,在(1)处:没有那个文件或目录
make[1]: [mpas_mesh.o] 错误 1 (忽略)
致命错误: 无法打开模块文件‘mpas_mesh.mod’读取,在(1)处:没有那个文件或目录
make[1]: [remapper.o] 错误 1 (忽略)
致命错误: 无法打开模块文件‘process_domain_module.mod’读取,在(1)处:没有那个文件或目录
make[1]: [metgrid.o] 错误 1 (忽略)
gfortran: 错误:metgrid.o:没有那个文件或目录
gfortran: 错误:process_domain_module.o:没有那个文件或目录
gfortran: 错误:scan_input.o:没有那个文件或目录
gfortran: 错误:mpas_mesh.o:没有那个文件或目录
gfortran: 错误:remapper.o:没有那个文件或目录
make[1]: [metgrid.exe] 错误 1 (忽略)
collect2: 错误:ld 返回 1
make[1]: [g2print.exe] 错误 1 (忽略)
gfortran: 错误:int2nc.o:没有那个文件或目录
make[1]: [int2nc.exe] 错误 1 (忽略)
哪位老师能帮我看看 |
|