- 积分
- 2709
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2015-12-1
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
本帖最后由 linana696 于 2017-8-14 14:19 编辑
3.4版本更新Vtable.GFS后 仍然报错
运行./metgrid.exe后显示好多警告,不知道是不是这一步已经不对了,但是最后又报Successful completion of metgrid.
Processing domain 1 of 2
Processing 2016-01-01_00
FILE
WARNING: Entry in METGRID.TBL not found for field UTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field UMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTMAXW. Default options will be used for this field!
Processing 2016-01-01_06
FILE
WARNING: Entry in METGRID.TBL not found for field UTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field UMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTMAXW. Default options will be used for this field!
Processing domain 2 of 2
Processing 2016-01-01_00
FILE
WARNING: Entry in METGRID.TBL not found for field UTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field UMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTMAXW. Default options will be used for this field!
Processing 2016-01-01_06
FILE
WARNING: Entry in METGRID.TBL not found for field UTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTTROP. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field UMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field VMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field PMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field TMAXW. Default options will be used for this field!
WARNING: Entry in METGRID.TBL not found for field HGTMAXW. Default options will be used for this field!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Successful completion of metgrid. !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
运行./real.exe后rsl.error.0000报错(运行后没有生成wrfinput)
rsl.error.0000
taskid: 0 hostname: node1
Namelist logging not found in namelist.input. Using registry defaults for varia
bles in logging.
Namelist dfi_control not found in namelist.input. Using registry defaults for v
ariables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables
in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for varia
bles in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables
in scm
Namelist fire not found in namelist.input. Using registry defaults for variable
s in fire
Namelist diags not found in namelist.input. Using registry defaults for variabl
es in diags
Ntasks in X 1, ntasks in Y 1
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to ze
ro.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval an
d ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval an
d ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to 4
REAL_EM V3.5.1 PREPROCESSOR
*************************************
Parent domain
ids,ide,jds,jde 1 101 1 101
ims,ime,jms,jme -4 106 -4 106
ips,ipe,jps,jpe 1 101 1 101
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1, 293332196 bytes allocat
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval an
d ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to 4
REAL_EM V3.5.1 PREPROCESSOR
*************************************
Parent domain
ids,ide,jds,jde 1 101 1 101
ims,ime,jms,jme -4 106 -4 106
ips,ipe,jps,jpe 1 101 1 101
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1, 293332196 bytes allocat
ed
metgrid input_wrf.F first_date_input = 2016-01-01_00:00:00
metgrid input_wrf.F first_date_nml = 2016-01-01_00:00:00
d01 2016-01-01_00:00:00 Timing for input 0 s.
d01 2016-01-01_00:00:00 flag_soil_layers read from met_em file is 1
Max map factor in domain 1 = 1.07. Scale the dt in the model accordingly.
d01 2016-01-01_00:00:00 t(i,j,k) was 0 at 1 1 1
, setting Qv to 0
d01 2016-01-01_00:00:00 t(i,j,k) was 0 at 2 1 1
, setting Qv to 0
d01 2016-01-01_00:00:00 t(i,j,k) was 0 at 3 1 1
, setting Qv to 0
d01 2016-01-01_00:00:00 t(i,j,k) was 0 at 4 1 1
, setting Qv to 0
d01 2016-01-01_00:00:00 t(i,j,k) was 0 at 5 1 1
运行./wrf.exe后rsl.error.0000报错
rsl.out.0000
taskid: 0 hostname: node1
Namelist logging not found in namelist.input. Using registry defaults for varia
bles in logging.
Namelist dfi_control not found in namelist.input. Using registry defaults for v
ariables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables
in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for varia
bles in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables
in scm
Namelist fire not found in namelist.input. Using registry defaults for variable
s in fire
Namelist diags not found in namelist.input. Using registry defaults for variabl
es in diags
Ntasks in X 2, ntasks in Y 5
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to ze
ro.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
= 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval an
d ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting
sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval an
d ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to 4
WRF V3.5.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 101 1 101
ims,ime,jms,jme -4 57 -4 27
ips,ipe,jps,jpe 1 50 1 20
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1, 43772692 bytes allocat
ed
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 70
program wrf: error opening wrfinput_d01 for reading ierr= -1021
-------------------------------------------
namelist.wps
&share
wrf_core = 'ARW',
max_dom = 2,
start_date = '2016-01-01_00:00:00','2016-01-01_00:00:00',
end_date = '2016-01-01_06:00:00','2016-01-01_06:00:00',
interval_seconds = 21600
io_form_geogrid = 2,
/
&geogrid
parent_id = 1, 1,
parent_grid_ratio = 1, 3,
i_parent_start = 1, 21,
j_parent_start = 1, 14,
e_we = 101, 181,
e_sn = 101, 220,
geog_data_res = '10m','2m',
dx = 30000,
dy = 30000,
map_proj = 'mercator',
ref_lat = 22.5,
ref_lon = 125.4,
truelat1 = 30.0,
truelat2 = 60.0,
stand_lon = 125,
geog_data_path = '/WORK/WRF/work/geog'
/
&ungrib
out_format = 'WPS',
prefix = 'FILE',
namelist.input
&time_control
run_days = 0,
run_hours = 6,
run_minutes = 0,
run_seconds = 0,
start_year = 2016, 2016,
start_month = 01, 01,
start_day = 01, 01,
start_hour = 00, 00,
start_minute = 00, 00,
start_second = 00, 00,
end_year = 2016, 2016,
end_month = 01, 01,
end_day = 01, 01,
end_hour = 06, 06,
end_minute = 00, 00,
end_second = 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,
history_interval_s = 300, 60,
frames_per_outfile = 1, 1,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 30,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 2,
e_we = 101, 181,
e_sn = 101, 220,
e_vert = 30, 30,
p_top_requested = 5000,
num_metgrid_levels = 29,
num_metgrid_soil_levels = 4,
dx = 30000, 10000,
dy = 30000, 10000,
grid_id = 1, 2,
parent_id = 0, 1,
i_parent_start = 1, 21,
j_parent_start = 1, 14,
parent_grid_ratio = 1, 3,
parent_time_step_ratio = 30, 1,
feedback = 1,
smooth_option = 0
/
&physics
mp_physics = 2, 2,
ra_lw_physics = 1, 1,
ra_sw_physics = 1, 1,
radt = 30, 30,
sf_sfclay_physics = 1, 1,
sf_surface_physics = 2, 2,
bl_pbl_physics = 1, 1,
bldt = 0, 0,
cu_physics = 1, 1,
cudt = 5, 5,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0, 0,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0,
diff_6th_factor = 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000.,
dampcoef = 0.2, 0.2,
khdif = 0, 0,
kvdif = 0, 0,
non_hydrostatic = .true., .true.,
moist_adv_opt = 1, 1,
scalar_adv_opt = 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,
nested = .false., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
|
|