关于ARWpost转wrfout中rh变量

央哥儿

wrfout里没有rh，想通过ARWpost处理这个变量，请问怎样修改ARWpost.namelist，plot那里没有太搞清楚用法
这是我的namelist，
&datetime
start_date = '2016-11-14_00:00:00',
end_date   = '2016-11-16_00:00:00',
interval_seconds = 3600,
tacc = 0,
debug_level = 0,
/

&io
input_root_name = '/home/Yang/wrf_chem/WPS/WPSout/20161112_1115/wrfout_d03_2016-11-*'
output_root_name = '/home/Yang/wrf/ARWpost/output/chem/20161114_1116_RH'
plot = 'all_list'
mercator_defs = .False.
/
split_output = .False.
frames_per_outfile = 1


plot = 'T2,U,V,U10,V10,PBLH,rh,rh2'
! Below is a list of all available diagnostics
fields = 'T2,U,V,U10,V10,PBLH,rh,rh2'


&interp
interp_method = 1,
interp_levels = 1000.,975.,950.,925.,900.,875.,850.,825.,800.,775.,750.,725.,700.,675.,650.,625.,600.,575.,550.,525.,500.,475.,450.,425.,400.,375.,350.,325.,300.,275.,250.,225.,200.,175.,/150.,125.,100.,
/
extrapolate = .true.

interp_method = 1,     ! 0 is model levels, -1 is nice height levels, 1 is user specified pressure/height

interp_levels = 1000.,975.,950.,925.,900.,875.,850.,825.,800.,775.,750.,725.,700.,675.,650.,625.,600.,575.,550.,525.,500.,475.,450.,425.,400.,375.,350.,325.,300.,275.,250.,225.,200.,175.,/150.,125.,100.,
interp_levels = 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0,

小其其格

&datetime
start_date = '2016-11-14_00:00:00',
end_date   = '2016-11-16_00:00:00',
interval_seconds = 3600,
tacc = 0,
debug_level = 0,
/

&io
input_root_name = '/home/Yang/wrf_chem/WPS/WPSout/20161112_1115/wrfout_d03_2016-11-*'
output_root_name = '/home/Yang/wrf/ARWpost/output/chem/20161114_1116_RH'
plot = 'all_list'
fields = 'T2,U,V,U10,V10,PBLH,rh,rh2'
mercator_defs = .False.
/
split_output = .False.
frames_per_outfile = 1


plot = 'T2,U,V,U10,V10,PBLH,rh,rh2'
! Below is a list of all available diagnostics
fields = 'T2,U,V,U10,V10,PBLH,rh,rh2'


&interp
interp_method = 1,
interp_levels = 1000.,975.,950.,925.,900.,875.,850.,825.,800.,775.,750.,725.,700.,675.,650.,625.,600.,575.,550.,525.,500.,475.,450.,425.,400.,375.,350.,325.,300.,275.,250.,225.,200.,175.,/150.,125.,100.,
/
extrapolate = .true.

interp_method = 1,     ! 0 is model levels, -1 is nice height levels, 1 is user specified pressure/height

interp_levels = 1000.,975.,950.,925.,900.,875.,850.,825.,800.,775.,750.,725.,700.,675.,650.,625.,600.,575.,550.,525.,500.,475.,450.,425.,400.,375.,350.,325.,300.,275.,250.,225.,200.,175.,/150.,125.,100.,
interp_levels = 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, 5.00, 6.00, 7.00, 8.00, 9.00, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0,



红色语句也加进去就可以了。表明你绘制的是T2,U,V,U10,V10,PBLH,rh,rh2这些量

央哥儿

小其其格 发表于 2017-11-5 23:39
&datetime
start_date = '2016-11-14_00:00:00',
end_date   = '2016-11-16_00:00:00',

成功！谢谢你！

央哥儿

小其其格 发表于 2017-11-5 23:39
&datetime
start_date = '2016-11-14_00:00:00',
end_date   = '2016-11-16_00:00:00',

成功！谢谢你！