- 积分
- 4507
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2016-4-23
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看，没有帐号？立即注册
x
本帖最后由 刀客白刃 于 2018-3-22 21:54 编辑
在运行wrf过程中
wps一切正常
wrf.exe出现--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.但依然正常运行，到后面运行到一半出现At line 254 of file module_bl_acm.f90。数据提取出来也有点问题，网上的帖子看过后修改了，问题没解决
Fortran runtime error: End of record
Timing for main: time 2014-01-03_22:33:00 on domain 1: 40.76072 elapsed seconds
错误，应该怎么改呀谢谢大佬们指教
javascript:;
&time_control
run_days = 6,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2014, 2014, 2014,
start_month = 01, 01, 01,
start_day = 01, 01, 01,
start_hour = 00, 00, 00,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2014, 2014, 2014
end_month = 01, 01, 01,
end_day = 07, 07, 07,
end_hour = 00, 00, 00,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600,
input_from_file = .true.,.true.,.true.,
history_interval = 60, 60, 60,
frames_per_outfile = 1000, 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 180,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 3,
e_we = 77, 131, 91,
e_sn = 53, 91, 46,
e_vert = 35, 35, 35,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
eta_levels = 1.000,0.99725,0.99537,0.99217,0.98995,0.98495,0.97121,
0.966, 0.950, 0.933, 0.913, 0.892, 0.869, 0.844,
0.816, 0.786, 0.753, 0.718, 0.680, 0.639, 0.596,
0.550, 0.501, 0.451, 0.398, 0.345, 0.290, 0.236,
0.188, 0.145, 0.108, 0.075, 0.046, 0.021, 0.000,
dx = 25000, 5000, 1000,
dy = 25000, 5000, 1000,
grid_id = 1, 2, 3,
parent_id = 1, 1, 2,
i_parent_start = 1, 25, 62,
j_parent_start = 1, 17, 47,
parent_grid_ratio = 1, 5, 5,
parent_time_step_ratio = 1, 5, 5,
feedback = 1,
smooth_option = 0
/
&physics
mp_physics = 2, 2, 2,
ra_lw_physics = 1, 1, 1,
ra_sw_physics = 1, 1, 1,
radt = 30, 30, 30,
sf_sfclay_physics = 1, 1, 1,
sf_surface_physics = 1, 1, 1,
bl_pbl_physics = 7, 7, 7,
bldt = 0, 0, 0,
cu_physics = 1, 1, 0,
cudt = 5, 5, 5,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 5,
sf_urban_physics = 0, 0, 0,
/
&fdda
/
&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.01, 0.01, 0.01
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
taskid: 0 hostname: login
starting wrf task 0 of 1
Quilting with 1 groups of 0 I/O tasks.
Namelist logging not found in namelist.input. Using registry defaults for variables in logging.
starting wrf task 0 of 1
Namelist logging not found in namelist.input. Using registry defaults for variables in logging.
Namelist dfi_control not found in namelist.input. Using registry defaults for variables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables in tc
Namelist noah_mp not found in namelist.input. Using registry defaults for variables in noah_mp
Namelist scm not found in namelist.input. Using registry defaults for variables in scm
Namelist fire not found in namelist.input. Using registry defaults for variables in fire
Namelist diags not found in namelist.input. Using registry defaults for variables in diags
Ntasks in X 1 , ntasks in Y 1
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval = 0 for all domains
--- NOTE: grid_fdda is 0 for domain 1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 2, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 2, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 2, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: grid_fdda is 0 for domain 3, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain 3, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain 3, setting obs nudging interval and ending time to 0 for that domain.
bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- NOTE: num_soil_layers has been set to 5
WRF V3.5.1 MODEL
*************************************
Parent domain
ids,ide,jds,jde 1 77 1 53
ims,ime,jms,jme -4 82 -4 58
ips,ipe,jps,jpe 1 77 1 53
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
alloc_space_field: domain 1 , 133931764 bytes allocated
med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain 1: 0.03381 elapsed seconds
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND 33 CATEGORIES 2 SEASONS WATER CATEGORY = 16 SNOW CATEGORY = 24
*************************************
|
|
8 金钱
窥视卡
雷达卡
发表于 2018-3-20 11:48:50
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
楼主