- 积分
- 5079
- 贡献
-
- 精华
- 在线时间
- 小时
- 注册时间
- 2017-2-15
- 最后登录
- 1970-1-1
|
登录后查看更多精彩内容~
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
本帖最后由 骨头333 于 2018-8-9 14:05 编辑
chem安装好了之后运行了一个例子,使用没有更改的namelist可以wrf.exe跑出结果,但在namelist中添加了chem的一些选项后,将chem_opt设为0(按道理说chem_opt设为0相当于只跑wrf)却在最后一步出现错误。已经重装过wrfchem了,还是出现同样的错误,有谁遇到过同样的问题的,辛苦看看吧!前面一直到real.exe都是正常运行,直到wrf.exe就会报错,错误如下:
*********************************************************************
Timing for Writing wrfout_d01_2013-11-27_12:00:00 for domain 1: 0.98935 elapsed seconds
1 input_wrf: wrf_get_next_time current_date: 2013-11-27_12:00:00 Status = -10
d01 2013-11-27_12:00:00 ---- ERROR: Could not find matching time in input file wrfout_d01_2013-11-27_12:00:00
NOTE: 1 namelist vs input data inconsistencies found.
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE: <stdin> LINE: 1168
NOTE: Please check and reset these options
-------------------------------------------
taskid: 0 hostname: login1
没进行更改的namelist如下:
&time_control
run_days = 14,
run_hours = 12,
run_minutes = 0,
run_seconds = 0,
start_year = 2013, 2000, 2000,
start_month = 11, 01, 01,
start_day = 27, 24, 24,
start_hour = 12, 12, 12,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2013, 2000, 2000,
end_month = 12, 01, 01,
end_day = 12, 25, 25,
end_hour = 00, 12, 12,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,
history_interval = 60, 60, 60,
frames_per_outfile = 1, 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/
&domains
time_step = 18,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 1,
e_we = 241, 112, 94,
e_sn = 265, 97, 91,
e_vert = 30, 30, 30,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 3000, 10000, 3333.33,
dy = 3000, 10000, 3333.33,
grid_id = 1, 2, 3,
parent_id = 0, 1, 2,
i_parent_start = 1, 31, 30,
j_parent_start = 1, 17, 30,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 0
/
&physics
physics_suite = 'CONUS'
radt = 30, 30, 30,
bldt = 0, 0, 0,
cudt = 5, 5, 5,
icloud = 1,
num_soil_layers = 4,
num_land_cat = 21,
sf_urban_physics = 0, 0, 0,
/
&fdda
/
&dynamics
w_damping = 1,
diff_opt = 1, 1, 1,
km_opt = 4, 4, 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
gwd_opt = 1,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
更改后的namelist如下:
&time_control
run_days = 14,
run_hours = 12,
run_minutes = 0,
run_seconds = 0,
start_year = 2013, 2000, 2000,
start_month = 11, 01, 01,
start_day = 27, 24, 24,
start_hour = 12, 12, 12,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2013, 2000, 2000,
end_month = 12, 01, 01,
end_day = 12, 25, 25,
end_hour = 00, 12, 12,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,
history_interval = 60, 60, 60,
frames_per_outfile = 1, 1000, 1000,
restart = .false.,
restart_interval = 5000,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
auxinput6_inname = 'wrfbiochemi_d01',
auxinput7_inname = 'wrffirechemi_d<domain>',
auxinput8_inname = 'wrfchemi_gocart_bg_d<domain>',
auxinput12_inname = 'wrf_chem_input',
auxinput5_interval_m = 86400,
auxinput7_interval_m = 86400,
auxinput8_interval_m = 86400,
io_form_auxinput2 = 0,
io_form_auxinput5 = 2,
io_form_auxinput6 = 0,
io_form_auxinput7 = 0,
io_form_auxinput8 = 0,
io_form_auxinput12 = 0,
debug_level = 0,
auxinput1_inname = 'met_em.d<domain>.<date>',
/
auxinput13_inname = 'wrfchemv_d<domain>',
auxinput13_interval_m = 86400,
io_form_auxinput13 = 0,
&dfi_control
/
&domains
time_step = 18,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 1,
s_we = 1,
e_we = 241, 112, 94,
s_sn = 1,
e_sn = 265, 97, 91,
e_vert = 29, 30, 30,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 3000, 10000, 3333.33,
dy = 3000, 10000, 3333.33,
grid_id = 1, 2, 3,
parent_id = 0, 1, 2,
i_parent_start = 1, 31, 30,
j_parent_start = 1, 17, 30,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 0,
zap_close_levels = 50,
interp_type = 1,
t_extrap_type = 2,
force_sfc_in_vinterp = 0,
use_levels_below_ground = .true.,
use_surface = .true.,
lagrange_order = 1,
/
sfcp_to_sfcp = .true.,
&physics
num_land_cat = 21,
mp_physics = 4,
progn = 0,
ra_lw_physics = 1,
ra_sw_physics = 2,
radt = 10, 30, 30,
sf_sfclay_physics = 1,
sf_surface_physics = 2,
bl_pbl_physics = 1,
bldt = 0, 0, 0,
cu_physics = 3,
cu_diag = 1,
cudt = 5, 5, 5,
ishallow = 0,
isfflx = 1,
ifsnow = 1,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
sf_urban_physics = 0, 0, 0,
mp_zero_out = 2,
mp_zero_out_thresh = 1.e-12,
maxiens = 1,
maxens = 3,
maxens2 = 3,
maxens3 = 16,
ensdim = 144,
cu_rad_feedback = .true.,
/
&fdda
/
&dynamics
rk_ord = 3,
w_damping = 1,
diff_opt = 1, 1, 1,
km_opt = 4, 4, 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.01, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .true., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
gwd_opt = 0,
chem_adv_opt = 1,
tke_adv_opt = 1,
time_step_sound = 4,
h_mom_adv_order = 5,
v_mom_adv_order = 3,
h_sca_adv_order = 5,
v_sca_adv_order = 3,
/
&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/
&grib2
/
&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/
&chem
kemit = 1,
chem_opt = 0,
bioemdt = 30,
photdt = 2,
chemdt = 6,
io_style_emissions = 2,
emiss_opt = 3,
emiss_inpt_opt = 1,
emiss_opt_vol = 0,
emiss_ash_hgt = 20000.,
chem_in_opt = 0,
phot_opt = 2,
gas_drydep_opt = 0,
aer_drydep_opt = 1,
bio_emiss_opt = 0,
ne_area = 0,
dust_opt = 0,
dmsemis_opt = 1,
seas_opt = 0,
depo_fact = 0.25,
gas_bc_opt = 0,
gas_ic_opt = 0,
aer_bc_opt = 1,
aer_ic_opt = 1,
gaschem_onoff = 0,
aerchem_onoff = 1,
wetscav_onoff = 0,
cldchem_onoff = 0,
vertmix_onoff = 1,
chem_conv_tr = 0,
conv_tr_wetscav = 0,
conv_tr_aqchem = 0,
biomass_burn_opt = 1,
plumerisefire_frq = 30,
have_bcs_chem = .false.,
aer_ra_feedback = 0,
aer_op_opt = 0,
opt_pars_out = 0,
diagnostic_chem = 0,
/
|
-
|