登录后查看更多精彩内容~
您需要 登录 才可以下载或查看，没有帐号？立即注册
x
本帖最后由 玄奘老乡 于 2018-8-17 08:33 编辑
（1）I installed it according to the teaching of this website. http://www2.mmm.ucar.edu/wrf/OnLineTutorial/compilation_tutorial.php#STEP1 （2）I have the following error when compiling WPS3.9.1.
[ybjin@inode1 WPS]$ ./compile > log.compile
read_geogrid.c:23:0: warning: "BIG_ENDIAN" redefined [enabled by default]
#define BIG_ENDIAN 0
^
In file included from /usr/include/bits/waitstatus.h:64:0,
from /usr/include/stdlib.h:42,
from read_geogrid.c:12:
/usr/include/endian.h:46:0: note: this is the location of the previous definition
# define BIG_ENDIAN __BIG_ENDIAN
^
read_geogrid.c:24:0: warning: "LITTLE_ENDIAN" redefined [enabled by default]
#define LITTLE_ENDIAN 1
^
In file included from /usr/include/bits/waitstatus.h:64:0,
from /usr/include/stdlib.h:42,
from read_geogrid.c:12:
/usr/include/endian.h:45:0: note: this is the location of the previous definition
# define LITTLE_ENDIAN __LITTLE_ENDIAN
^
read_geogrid.c: In function ‘read_geogrid_’:
read_geogrid.c:124:13: warning: left shift count >= width of type [enabled by default]
if ((*isigned) && (ival > (1 << 31))) ival -= (1 << 32);
^
Makefile:44: warning: overriding recipe for target `.f.o'
/media/small/ybjin/WRFV3.9.1.1/Build_WRF/WPS/configure.wps:100: warning: ignoring old recipe for target `.f.o'
Makefile:48: warning: overriding recipe for target `.c.o'
/media/small/ybjin/WRFV3.9.1.1/Build_WRF/WPS/configure.wps:96: warning: ignoring old recipe for target `.c.o'
ar: creating libw3.a
Makefile:67: warning: overriding recipe for target `.F.o'
/media/small/ybjin/WRFV3.9.1.1/Build_WRF/WPS/configure.wps:104: warning: ignoring old recipe for target `.F.o'
Makefile:72: warning: overriding recipe for target `.f.o'
/media/small/ybjin/WRFV3.9.1.1/Build_WRF/WPS/configure.wps:100: warning: ignoring old recipe for target `.f.o'
Makefile:75: warning: overriding recipe for target `.c.o'
/media/small/ybjin/WRFV3.9.1.1/Build_WRF/WPS/configure.wps:96: warning: ignoring old recipe for target `.c.o'
ar: creating libg2_4.a
Makefile:90: warning: overriding recipe for target `.F.o'
../../configure.wps:104: warning: ignoring old recipe for target `.F.o'
Makefile:95: warning: overriding recipe for target `.c.o'
../../configure.wps:96: warning: ignoring old recipe for target `.c.o'
ar: creating libpgu.a
/data/ybjin/WRFV3.9.1.1/Build_WRF/LIBRARIES/grib2/lib/libjasper.a(jas_stream.o): In function `jas_stream_tmpfile':
/data/ybjin/WRFV3.9.1.1/Build_WRF/LIBRARIES/jasper-1.900.1/src/libjasper/base/jas_stream.c:368: warning: the use of `tmpnam' is dangerous, better use `mkstemp'
scan_input.f90:14.8:
use netcdf
1
Fatal Error: Can't open module file 'netcdf.mod' for reading at (1): No such file or directory
make[1]: [scan_input.o] Error 1 (ignored)
mpas_mesh.f90:14.8:
use scan_input
1
Fatal Error: Can't open module file 'scan_input.mod' for reading at (1): No such file or directory
make[1]: [mpas_mesh.o] Error 1 (ignored)
remapper.f90:14.8:
use mpas_mesh
1
Fatal Error: Can't open module file 'mpas_mesh.mod' for reading at (1): No such file or directory
make[1]: [remapper.o] Error 1 (ignored)
process_domain_module.f90:14.7:
use mpas_mesh
1
Fatal Error: Can't open module file 'mpas_mesh.mod' for reading at (1): No such file or directory
make[1]: [process_domain_module.o] Error 1 (ignored)
metgrid.f90:23.7:
use process_domain_module
1
Fatal Error: Can't open module file 'process_domain_module.mod' for reading at (1): No such file or directory
make[1]: [metgrid.o] Error 1 (ignored)
gfortran: error: metgrid.o: No such file or directory
gfortran: error: process_domain_module.o: No such file or directory
gfortran: error: scan_input.o: No such file or directory
gfortran: error: mpas_mesh.o: No such file or directory
gfortran: error: remapper.o: No such file or directory
make[1]: [metgrid.exe] Error 1 (ignored)
Makefile:90: warning: overriding recipe for target `.F.o'
../../configure.wps:104: warning: ignoring old recipe for target `.F.o'
Makefile:95: warning: overriding recipe for target `.c.o'
../../configure.wps:96: warning: ignoring old recipe for target `.c.o'
g1print.f90:661.71:
'VSTR','M FLX','LMH','LMV','SGLYR','NLAT','ELON','UMAS','VMAS','XPRATE',&
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:600.64:
'GWREC','QREC ','SNOWT','VBDSF','VDDSF','NBDSF','NDDSF','SNFALB',&
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:601.58:
'RLYRS','M FLX',' ',' ',' ','NLAT','ELON','FLDCAP','ACOND','SNOA
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:602.66:
'CCOND','LAI','SFCRH','SALBD',' ',' ','NDVI','DRIP','VBSALB','VWSA
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:602.75:
'CCOND','LAI','SFCRH','SALBD',' ',' ','NDVI','DRIP','VBSALB','VWSA
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:603.8:
'NBSALB','NWSALB','FRZR','FROZR','TSNOW','MTERH',' ','SBSNO','EVBS','E
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:603.17:
'NBSALB','NWSALB','FRZR','FROZR','TSNOW','MTERH',' ','SBSNO','EVBS','E
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:604.16:
'VTCIN','VTCAPE','RSMIN','DSWRF','DLWRF',' ','MSTAV','SFEXC',' ','
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:608.31:
'SNOWC','SNOT','POROS','SBT112','SBT113','SBT114','SBT115',' ','RCS'
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:608.40:
'SNOWC','SNOT','POROS','SBT112','SBT113','SBT114','SBT115',' ','RCS'
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:608.49:
'SNOWC','SNOT','POROS','SBT112','SBT113','SBT114','SBT115',' ','RCS'
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:608.58:
'SNOWC','SNOT','POROS','SBT112','SBT113','SBT114','SBT115',' ','RCS'
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:576.23:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','M
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:576.32:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','M
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:576.41:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','M
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:576.50:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','M
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:576.60:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','M
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:576.69:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','M
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:576.78:
'ETSRG','RHPW','OZMAX1','OZMAX8','PDMAX1','PDMAX24','MAXREF','MXUPHL','MAXU
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:577.8:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:577.17:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
g1print.f90:577.42:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:577.52:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:577.62:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:577.72:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:577.82:
'MAXDVV','MAXVIG','RETOP','VRATE','TCSRG20','TCSRG30','TCSRG40','TCSRG50','TCSR
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:578.8:
'TCSRG70','TCSRG80','TCSRG90','HINDX','DIFTEN','PSPCP','MAXUW','MAXVW','
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:578.18:
'TCSRG70','TCSRG80','TCSRG90','HINDX','DIFTEN','PSPCP','MAXUW','MAXVW','
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:578.28:
'TCSRG70','TCSRG80','TCSRG90','HINDX','DIFTEN','PSPCP','MAXUW','MAXVW','
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/7)
g1print.f90:578.46:
'TCSRG70','TCSRG80','TCSRG90','HINDX','DIFTEN','PSPCP','MAXUW','MAXVW','
1
Warning: Initialization string starting at (1) was truncated to fit the variable (5/6)
Makefile:90: warning: overriding recipe for target `.F.o'
../../configure.wps:104: warning: ignoring old recipe for target `.F.o'
Makefile:95: warning: overriding recipe for target `.c.o'
../../configure.wps:96: warning: ignoring old recipe for target `.c.o'
/data/ybjin/WRFV3.9.1.1/Build_WRF/LIBRARIES/grib2/lib/libjasper.a(jas_stream.o): In function `jas_stream_tmpfile':
/data/ybjin/WRFV3.9.1.1/Build_WRF/LIBRARIES/jasper-1.900.1/src/libjasper/base/jas_stream.c:368: warning: the use of `tmpnam' is dangerous, better use `mkstemp' （3）After that, I checked a lot of related content on the official forum, but most of them were not related to my question. Later I found a first pass, but I didn't understand it （http://www.starnix.ir/questions/مشکل-در-کامپایل-نمودن-wps） （4）my compile.wps： # configure.wps
#
# This file was automatically generated by the configure script in the
# top level directory. You may make changes to the settings in this
# file but be aware they will be overwritten each time you run configure.
# Ordinarily, it is necessary to run configure once, when the code is
# first installed.
#
# To permanently change options, change the settings for your platform
# in the file arch/configure.defaults, the preamble, and the postamble -
# then rerun configure.
#
.SUFFIXES: .F .f .c .o
SHELL = /bin/sh
NCARG_LIBS = -L$(NCARG_ROOT)/lib -lncarg -lncarg_gks -lncarg_c \
-lX11 -lXext -lpng -lz -lcairo -lfontconfig -lpixman-1 \
-lfreetype -lexpat -lpthread -lbz2 -lXrender -lgfortran -lgcc
NCARG_LIBS2 = # May be overridden by architecture specific value below
FDEFS = -DUSE_JPEG2000 -DUSE_PNG
# Listing of options that are usually independent of machine type.
# When necessary, these are over-ridden by each architecture.
ARFLAGS =
PERL = perl
RANLIB = echo
WRF_DIR = ../WRFV3
WRF_INCLUDE = -I$(WRF_DIR)/external/io_netcdf \
-I$(WRF_DIR)/external/io_grib_share \
-I$(WRF_DIR)/external/io_grib1 \
-I$(WRF_DIR)/external/io_int \
-I$(WRF_DIR)/inc \
-I$(NETCDF)/include
WRF_LIB = -L$(WRF_DIR)/external/io_grib1 -lio_grib1 \
-L$(WRF_DIR)/external/io_grib_share -lio_grib_share \
-L$(WRF_DIR)/external/io_int -lwrfio_int \
-L$(WRF_DIR)/external/io_netcdf -lwrfio_nf \
-L$(NETCDF)/lib -lnetcdff -lnetcdf
#### Architecture specific settings ####
COMPRESSION_LIBS = # intentionally left blank, fill in COMPRESSION_LIBS below
COMPRESSION_INC = # intentionally left blank, fill in COMPRESSION_INC below
#
# Settings for Linux x86_64, gfortran (serial)
#
#
COMPRESSION_LIBS = -L/data/ybjin/WRFV3.9.1.1/Build_WRF/LIBRARIES/grib2/lib -ljasper -lpng -lz
COMPRESSION_INC = -I/data/ybjin/WRFV3.9.1.1/Build_WRF/LIBRARIES/grib2/include
FDEFS = -DUSE_JPEG2000 -DUSE_PNG
SFC = gfortran
SCC = gcc
DM_FC = mpif90 -f90=gfortran
DM_CC = mpicc -cc=gcc
FC = $(SFC)
CC = $(SCC)
LD = $(FC)
FFLAGS = -ffree-form -O -fconvert=big-endian -frecord-marker=4
F77FLAGS = -ffixed-form -O -fconvert=big-endian -frecord-marker=4
FCSUFFIX =
FNGFLAGS = $(FFLAGS)
LDFLAGS =
CFLAGS =
CPP = /usr/bin/cpp -P -traditional
CPPFLAGS = -D_UNDERSCORE -DBYTESWAP -DLINUX -DIO_NETCDF -DBIT32 -DNO_SIGNAL
RANLIB = ranlib
########################################################################################################################
#
# Macros, these should be generic for all machines
LN = ln -sf
MAKE = make -i -r
RM = /bin/rm -f
CP = /bin/cp
AR = ar ru
.IGNORE:
.SUFFIXES: .c .f .F .o
# There is probably no reason to modify these rules
.c.o:
$(RM) $@
$(CC) $(CPPFLAGS) $(CFLAGS) -c $<
.f.o:
$(RM) $@ $*.mod
$(FC) $(F77FLAGS) -c $< $(WRF_INCLUDE)
.F.o:
$(RM) $@ $*.mod
$(CPP) $(CPPFLAGS) $(FDEFS) $(WRF_INCLUDE) $< > $*.f90
$(FC) $(FFLAGS) -c $*.f90 $(WRF_INCLUDE)
# $(RM) $*.f90
（5）please give me help , thank you very much .
|
窥视卡
雷达卡
发表于 2018-8-13 12:38:41
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
楼主
