WRF运行时出错 求助

huang96169

用WRFDomain设置好模拟区域后 在WRFDomain文件夹下运行WRF时出错 错误信息如下
taskid: 0 hostname: altix-2
Namelist dfi_control not found in namelist.input. Using registry defaults for v
ariables in dfi_control
Namelist tc not found in namelist.input. Using registry defaults for variables
in tc
Namelist scm not found in namelist.input. Using registry defaults for variables
  in scm
Namelist fire not found in namelist.input. Using registry defaults for variable
s in fire
  Ntasks in X            1, ntasks in Y            2
--- NOTE: sst_update is 0, setting io_form_auxinput4 = 0 and auxinput4_interval
  = 0 for all domains
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending t
ime to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting
  sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval an
d ending time to 0 for that domain.
--- NOTE: num_soil_layers has been set to      4
WRF V3.3 MODEL
  *************************************
  Parent domain
  ids,ide,jds,jde            1         100           1         124
  ims,ime,jms,jme           -4         105          -4          69
  ips,ipe,jps,jpe            1         100           1          62
  *************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
    alloc_space_field: domain            1,              185167864 bytes allocat
ed
   med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain        1:    9.62190 elapsed seconds.
-------------- FATAL CALLED ---------------
FATAL CALLED FROM FILE:  <stdin>  LINE:     805
module_physics_init.F: LANDUSE_INIT: open failure for LANDUSE.TBL
-------------------------------------------
MPI: On host altix-2, Program /scratch/student/huangw/Documents/WRF/WRFV3/main/wrf.exe, Rank 0, Process 29686 called MPI_Abort(<communicator>, 1)
MPI: --------stack traceback-------
sh: line 1: idb: command not found
MPI: -----stack traceback ends-----
---
s.
  metgrid input_wrf.F first_date_input = 2011-07-06_06:00:00
  metgrid input_wrf.F first_date_nml = 2011-07-06_00:00:00
d01 2011-07-06_06:00:00 Timing for input          3 s.
d01 2011-07-06_06:00:00          flag_soil_layers read from met_em file is  1
d01 2011-07-06_06:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2011-07-06_06:00:00 Timing for processing          0 s.
d01 2011-07-06_06:00:00 Timing for output          1 s.
d01 2011-07-06_06:00:00 Timing for loop #    2 =          3 s.
  metgrid input_wrf.F first_date_input = 2011-07-06_12:00:00
  metgrid input_wrf.F first_date_nml = 2011-07-06_00:00:00
d01 2011-07-06_12:00:00 Timing for input          3 s.
d01 2011-07-06_12:00:00          flag_soil_layers read from met_em file is  1
d01 2011-07-06_12:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2011-07-06_12:00:00 Timing for processing          0 s.
d01 2011-07-06_12:00:00 Timing for output          0 s.
d01 2011-07-06_12:00:00 Timing for loop #    3 =          3 s.
  metgrid input_wrf.F first_date_input = 2011-07-06_18:00:00
  metgrid input_wrf.F first_date_nml = 2011-07-06_00:00:00
d01 2011-07-06_18:00:00 Timing for input          3 s.
d01 2011-07-06_18:00:00          flag_soil_layers read from met_em file is  1
d01 2011-07-06_18:00:00 Old data, no inland lake information
  Assume Noah LSM input
d01 2011-07-06_18:00:00 Timing for processing          0 s.
d01 2011-07-06_18:00:00 Timing for output          0 s.
d01 2011-07-06_18:00:00 Timing for loop #    4 =          3 s.
d01 2011-07-06_18:00:00 real_em: SUCCESS COMPLETE REAL_EM INIT

huang96169

文件夹下确实没有LANDUSE.TBL 而在安装好的WRFV3的run文件夹下有该文件 请问是不是把这个文件复制过来就可以了呢 为什么会缺少这个文件呢 难道不能再Domain里直接运行wrf.exe吗？

随缘

要做链接的

huang96169

随缘 发表于 2012-6-4 12:04

                               
登录/注册后可看大图

要做链接的

我已经把*。exe链接过来了 你的意思是不是还要把它提示说找不到的那个文件链接过来？

Forcast

domain和WRF一般在不同的目录里

whadifisher

怎么做链接呀？

whadifisher

有什么文档之类的指导文件

whadifisher

请各位大侠指点！

香草拿铁

ln 命令
link到当前目录

bfc1st

到底该怎么做啊，怎么没有个详细的回答