MCIP编译问题

qqqstt

麻烦请教一下各位，我已经把ICON,BCON,CCTM编译好了,用了CMAQ官方的测试用例做了测试，，，当时不需要用到MCIP所以现在才编译，出现了以下问题，请问有人知道这是什么错吗？
make[1]: Entering directory `/home/ttsun/CMAQ/CMAQ_REPO/PREP/mcip/src'
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c const_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [const_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c const_pbl_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [const_pbl_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c coord_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [coord_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c date_time_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [date_time_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c date_pack_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [date_pack_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c files_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [files_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c groutcom_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [groutcom_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c luvars_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [luvars_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c mcipparm_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [mcipparm_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c mcoutcom_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [mcoutcom_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c mdoutcom_mod.f90
make[1]: I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include: Command not found
make[1]: [mdoutcom_mod.o] Error 127 (ignored)
I/home/ttsun/netcdf363/netcdf-3.6.3/netcdf1/include -I/include  -c metinfo_mod.f90
"make1.mcip.log" 322L, 22958C                          

weilin421

你那个netcdf include路径前是-I 你是不是少写了个-啊

qqqstt

weilin421 发表于 2018-11-27 10:11
你那个netcdf include路径前是-I 你是不是少写了个-啊

请问在哪写？请问你的CMAQ是不是完全安装成功了，想加一下QQ，我的QQ:1004582202,谢谢哦~~

weilin421

你不是修改了makefile么，当然是mcip src下的makefile里改了

Jerri

楼主请问你这个问题解决了吗？我也遇到相同问题，可否分享一下？

阿坝州牦牛

您好，我遇到了同样的问题，方便解答吗？感谢！