ncl中y轴的设置

qizidou

在气象家园上看到的一段程序，给自己做个备忘，ncl中y轴的设置 res@tmYLMode="Explicit"
  res@tmYLValues=(/-30,-20,-10,0,10,20,30/)
  res@tmYLLabels=(/"-30~S~o~N~S","-20~S~o~N~S","-10~S~o~N~S","0","10~S~o~N~N","20~S~o~N~N","30~S~o~N~N"/)
  
  ;------------------------------------X轴设置----------------------------------------------------------
  res@tmXBMode="Explicit"
  res@tmXBMinorOn=False
  res@tmXBValues=(/0,27,52,78,102,127,152,177,202,227,252,279,302,329,352/)
  res@tmXBLabels=(/"1","6","11","16","21","26","31","36","41","46","51","56","61","66","71"/)
  res@tmXBTickStartF=1
  res@tmXBTickEndF=366
  res@tmXBTickSpacingF=25
  
  ;tmXBMinorThicknessF=1.2
resl=True
  res@tmXUseBottom=False
  res@tmXTMode="Explicit"
  res@tmXTLabelStride=0;每个大刻度显示对应标注
  res@tmXTValues=(/0,31,59,90,120,151,181,212,243,273,304,334/)
  res@tmXTLabels=(/"jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"/)
  res@tmXTLabelFontColor="black"
  res@tmXTLabelDeltaF=-0.6;标注与刻度的距离
  res@tmXTLabelFontHeightF=0.04
  ;------------------------------------设置垂直于X轴的参考线----------------------------------------------
  ;pres@gsnXRefLine=172
  ;res@gsnXRefLineDashPattern=16
  ;res@gsnXRefLineThicknessF=0.5
  ;------------------------------------设置垂直于Y轴的参考线----------------------------------------------
  ;res@gsnYRefLine=0
  ;res@gsnYRefLineDashPattern=16
  ;res@gsnYRefLineThicknessF=0.5
  ;-------------------------------------------------------------------------------------------------------
  

小哥8号

597265865 发表于 2019-7-15 17:39
楼楼问一下，y轴反转是什么指令可以告诉一下我么

@trYReverse = True

597265865

楼楼问一下，y轴反转是什么指令可以告诉一下我么

Lintcy

感谢楼主，正在苦恼y轴怎么设置不成功