运行wrf.exe出错

zhaole0402

taskid: 0 hostname: bogon
Ntasks in X            1 , ntasks in Y            1
--- WARNING: traj_opt is zero, but num_traj is not zero; setting num_traj to zero.
--- NOTE: grid_fdda is 0 for domain      1, setting gfdda interval and ending time to 0 for that domain.
--- NOTE: both grid_sfdda and pxlsm_soil_nudge are 0 for domain      1, setting sgfdda interval and ending time to 0 for that domain.
--- NOTE: obs_nudge_opt is 0 for domain      1, setting obs nudging interval and ending time to 0 for that domain.
--- NOTE: bl_pbl_physics /= 4, implies mfshconv must be 0, resetting
--- WARNING: Turning on cu_rad_feedback also requires setting cu_diag== 1
--- NOTE: RRTMG radiation is not used, setting:  o3input=0 to avoid data pre-processing
--- NOTE: num_soil_layers has been set to      4
WRF V3.7 MODEL
*************************************
Parent domain
ids,ide,jds,jde            1         165           1          98
ims,ime,jms,jme           -4         170          -4         103
ips,ipe,jps,jpe            1         165           1          98
*************************************
DYNAMICS OPTION: Eulerian Mass Coordinate
   alloc_space_field: domain            1 ,             593373692  bytes allocated
  med_initialdata_input: calling input_input
Timing for processing wrfinput file (stream 0) for domain        1:    0.06615 elapsed seconds
INPUT LandUse = "USGS"
LANDUSE TYPE = "USGS" FOUND          33  CATEGORIES           2  SEASONS WATER CATEGORY =           16  SNOW CATEGORY =           24
INITIALIZE THREE Noah LSM RELATED TABLES
LANDUSE TYPE = USGS FOUND          27  CATEGORIES
INPUT SOIL TEXTURE CLASSIFICATION = STAS
SOIL TEXTURE CLASSIFICATION = STAS FOUND          19  CATEGORIES
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
TSURFACE0_URB   289.939941
TC_URB2D   289.939941
QC_URB2D   9.99999978E-03
XXXR_URB2D   0.00000000
SH_URB2D   0.00000000
LH_URB2D   0.00000000
G_URB2D   0.00000000
RN_URB2D   0.00000000
TS_URB2D   289.939941
LF_AC_URB3D   0.00000000
SF_AC_URB3D   0.00000000
CM_AC_URB3D   0.00000000
SFVENT_URB3D   0.00000000
LFVENT_URB3D   0.00000000
FRC_URB2D  0.899999976
UTYPE_URB2D           2
I          21 J          20
num_urban_hi          15
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
USING DEFAULT URBAN MORPHOLOGY
WARNING, FRC_URB2D = 0 BUT IVGTYP IS URBAN
WARNING, THE URBAN FRACTION WILL BE READ FROM URBPARM.TBL
Timing for Writing wrfout_d01_2018-01-01_00:00:00 for domain        1:    0.18613 elapsed seconds
Timing for processing lateral boundary for domain        1:    0.01086 elapsed seconds
Tile Strategy is not specified. Assuming 1D-Y
WRF TILE   1 IS      1 IE    165 JS      1 JE     98
WRF NUMBER OF TILES =   1
d01 2018-01-01_00:00:00          312  points exceeded cfl=2 in domain d01 at time 2018-01-01_00:00:00 hours
d01 2018-01-01_00:00:00  MAX AT i,j,k:          109          43          14  vert_cfl,w,d(eta)=   1133.83801       1180.54297       8.00001621E-03
Timing for main: time 2018-01-01_00:01:00 on domain   1:    6.61430 elapsed seconds
Program received signal SIGSEGV: Segmentation fault - invalid memory reference.

Backtrace for this error:
#0  0x7F39F4D1B6F7
#1  0x7F39F4D1BD3E
#2  0x7F39F42172EF
#3  0x25AFB7D in __module_sf_sfclayrev_MOD_psim_stable
#4  0x25B4168 in __module_sf_sfclayrev_MOD_sfclayrev1d
#5  0x25B8B0D in __module_sf_sfclayrev_MOD_sfclayrev
#6  0x1D3FE14 in __module_surface_driver_MOD_surface_driver
#7  0x163DEEB in __module_first_rk_step_part1_MOD_first_rk_step_part1
#8  0x1073EA6 in solve_em_
#9  0xF79976 in solve_interface_
#10  0x4674F0 in __module_integrate_MOD_integrate
#11  0x405803 in __module_wrf_top_MOD_wrf_run

andrewsoong

内存溢出，减小时间步长试试

zhaole0402

andrewsoong 发表于 2019-6-4 07:35
内存溢出，减小时间步长试试

我的网格间距是36km,我试了积分步长为30。60 。120. 都不可以

andrewsoong

zhaole0402 发表于 2019-6-4 09:14
我的网格间距是36km,我试了积分步长为30。60 。120. 都不可以

那可能是你的边界经过了大地形，导致积分不收敛，换换区域试试

zhaole0402

andrewsoong 发表于 2019-6-4 14:21
那可能是你的边界经过了大地形，导致积分不收敛，换换区域试试

好的，我再试一下，谢谢您了

南方是有个我呀

你好 我和你的warning信息一模一样  请问你解决了么？

Sunshining

同问楼主，问题解决了吗？可不可以分享一下解决方法