运行regcm最后一步mpirun出现Error reading CLDPARAM的问题。

三月

安装好regcm之后，试着运行的一下，
最后一步 mpirun -np 2 -- allow-run-as-root ./bin/regcmMPI test_001.in
结果出现了关于namelist的error，
之后按照师兄给的方法修改test_001.in文件添加cldparam
[size=0.875]&cldparam
[size=0.875]ncld = 1, ! # of bottom model levels with no clouds (rad onl y)
[size=0.875]rhmax = 1.01, ! RH at which FCC= 1.0
[size=0.875]rhmin = 0.01, ! RH min value
[size=0.875]rh0land = 0.80, ! Relative humidity threshold for land
[size=0.875]rh0oce = 0.90, ! Relative humidity threshold for ocean
[size=0.875]tc0 = 238.0, ! Below this temperature, rh0 begins to approach unity
[size=0.875]cllwcv = 0.3e-3, ! Cloud liquid water content for convective precip.
[size=0.875]clfrcvmax = 0.75, ! Max cloud fractional cover for convective preci p.
[size=0.875]cftotmax = 0.75, ! Max total cover cloud fraction for radiation
[size=0.875]rcrit = 13.5, ! Mean critical radius
[size=0.875]coef_ccn = 2.0, ! Geometric mean Diameter and standard deviation
[size=0.875]abulk = 0.9, ! Bulk activation ratio
[size=0.875]lsrfhack = .false., ! Surface radiation hack
[size=0.875]/
[size=0.875]&subexparam
[size=0.875]qck1land = 0.0005,
[size=0.875]qck1oce = 0.0005,
[size=0.875]gulland = 0.65,
[size=0.875]guloce = 0.30,
[size=0.875]cevaplnd = 1.0e-5,
[size=0.875]caccrlnd = 6.0,
[size=0.875]caccroce = 6.0,
[size=0.875]conf = 1.00,


[size=0.875]可是我就是按照这个方法修改的，再次运行之后还是有error
[size=0.875][size=0.875]fatal in file: mod_params.F90 at line:  2412
Error reading CLDPARAM

不知道怎么修改